Rapid advancements in renewable energy technologies have been primarily driven by the increasing global energy demand for energy and the growing concerns over environmental pollution. Among these technologies, tidal current energy has achieved significant attention due to its high energy density and stable energy output. Compared to other renewable energy sources, such as solar and wind power, tidal current energy is more stable and predictable, offering considerable potential for integration into future energy systems. However, despite its promise, several key technological challenges must be addressed to enable the widespread development of tidal current energy technology. To address these challenges, this paper presents a comprehensive review of recent advancements in ocean tidal current energy technology, with particular emphasis on the analysis of the main types of energy harvesting devices and support structures. Furthermore, it evaluates representative tidal current energy devices based on their operational principles, technical features, and applications. By systematically reviewing mainstream hydrodynamic analysis methods, this paper evaluates their applicability and limitations in assessing the performance of tidal current energy devices. This assessment improves the accuracy of performance predictions and offers theoretical support for the optimal design of the energy harvesting systems. In addition, the paper addresses key issues in the development of tidal current energy technology, including technological feasibility, cost management, and environmental impact. These discussions provide a foundation for identifying emerging trends and major technical challenges in the field. Finally, the development prospects of tidal current energy technology are explored from the perspectives of technological advancement, economic viability, and sustainability. It is concluded that achieving widespread adoption of tidal current energy depends on factors such as technological maturity, effective cost control, and the balanced integration of environmental and social benefits.
The purpose of ship optimization is to reduce the resistance of the ship and improve the propulsive efficiency of the propeller. Taking the design of the hull, propeller and rudder as an example, the integration optimization of ship speed performance based on the fully-parametric model was described in detail. Based on the parent hull, stock propeller and flat plate rudder, the fully-parametric coupling models of ship, propeller and rudder were established. The fully-parametric optimization method was used to optimize the optimal combination of hull, propeller and rudder with low resistance, high efficiency and appropriate propeller light running margin. The models were tested in the towing tank to verify the speed performance of the two sets of hulls, propellers and rudders. It was found that the ship integration optimization method based on the fully-parametric model excavated the improvement space of the ship’s speed performance from the overall level and realized the integration optimization of the fully-parametric model. The design of hull, propeller and rudder achieved the best speed performance. Compared with the initial design, the speed performance was greatly improved. By analyzing the effects of the hull, propeller and rudder separately, it was found that these parts have different effects on speed performance improvement, and ultimately can maximize the overall comprehensive income; CFD calculation and model test results had a good agreement.
This study investigates the hydrodynamic and wake characteristics of a twin-rotor vertical axis tidal stream turbine (TR-VATST) under dynamic coupled excitation of rotation–surge–yaw. A three-dimensional computational fluid dynamics (CFD) model of the multi-degree-of-freedom (DoF) coupled motion of TR-VATST was developed using the improved delayed detached eddy simulation method. The effects of coupled motion at both co-frequency and different frequencies on the performance of TR-VATST were analyzed. Additionally, least squares method was used to fit the time histories of hydrodynamic coefficients, aiming to explore the influence of damping force and added mass force associated with surge and yaw motions. The study reveals the following findings: (1) In the coupled surge and yaw motion, the peak envelope of the hydrodynamic coefficient of TR-VATST exhibits significant fluctuations. The amplitude of these fluctuations is influenced by the motion frequency. Specifically, a combination of a higher surge frequency and a lower yaw frequency notably increases the dynamic loading amplitude of the hydrodynamic coefficients. (2) The wake of the TR-VATST experiences interpenetration and superimposition of axial stretching from surge motion and transverse shear from yaw motion. This leads to enhanced mixing between the two rotors and increased asymmetry in vortex distribution. The wake vortex structure becomes severely twisted and deformed. (3) In high-frequency co-frequency coupled motion, the added mass or damping force associated with surge motion is greater. In different frequency coupled motions, however, the damping force related to both surge and yaw are larger. The fitted results show good agreement with CFD calculations. The study's results provide valuable insight for the hydrodynamic analysis, structural design, and operational control of TR-VATST with multi-DoF.
Within real-world marine settings, the operational performance of floating tidal stream turbines is impacted by wave–current interaction effects and platform motion responses. Leveraging the improved delayed detached eddy simulation (IDDES) method, this research constructs a computational fluid dynamics (CFD) numerical analysis framework for floating turbines in wave–current environments. It further investigates the hydrodynamic behaviors and motion response features of the turbine under wave–current interactions. The results show that under the combined action of regular waves and steady currents, the fluctuation amplitudes of the power coefficient and thrust coefficient of the floating turbine exhibit a positive correlation with wave height, whereas the mean values of these coefficients remain relatively stable; in contrast, the mean values of the Cp and Ct are proportional to the wave period. Additionally, the motion amplitude of the platform shows a proportional relationship with both wave height and wave period. Flow field analysis demonstrates that elevations in wave height and period result in enhanced flow turbulence, disrupted wake vortex shedding patterns, non-uniform pressure distributions across the blades, and a larger pressure differential in the blade tip area. Such conditions may potentially induce cavitation erosion and fatigue loads. The results of the research have certain academic significance and value to the development and engineering of floating tidal current energy devices.