Miroslaw Witos

Prof. Miroslaw Witos

Instytut Techniczny Wojsk Lotniczych (Air Force Institute of Technology)
orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 August 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
MOMilan Oravec
Milan Oravec
PLPavol Lipovský
Pavol Lipovský
Miroslav ŠmelkoMiroslav Šmelko
Miroslav Šmelko
PAPavel Adamčík
Pavel Adamčík
MWMiroslaw Witos
Miroslaw Witos
JKJerzy Kwasniewski
Jerzy Kwasniewski
The magnetic field created by technical devices is a source of information. This information could be used in contactless diagnostics and predictive maintenance or for resolving problems along with standard NDT (nondestructive testing) methods, especially if we consider large, slow-speed devices, such as electromotors, transmissions, or generators. Identification of causalities of device failure processes with near magnetic field is one of the suitable NDT methods improving sustainability of systems. The measurements presented in the article were performed with the VEMA 04 fluxgate vector magnetometer with the DC-250 Hz bandwidth and 2 nT sensitivity. Postprocessing of the results was performed in the means of standard methods of discrete Fourier Transform, spectrogram creation and Wavelet Transform. The article presents data gathered during the measurement of a pair of extraction fans with power of 140 kW each and maximum revolutions up to 740 rev/min controlled by frequency converters and a single semi-Kaplan water power plant with 400 kW peak power at 1005 rev/min maximum generator speed. The measurements were performed before and after repairs of one of the ventilators in the ventilation system at 60% and 100% of maximal output power. The rotating magnetic fields of the fan electromotor stator, fan rotor revolutions, rotor slip frequency and ball-bearing frequencies were identified in frequency spectrums in the distance of 700 mm from fan electromotor axis in both cases. During the measurements on the semi-Kaplan turbine, the changes in states of mechanical and electrical components of the machine were monitored in the magnetic fields with increase of the power in the range of 0–95%, before and after phasing to the electrical grid. Standard processing methods, Discrete Fourier Transform, spectrograms and Discrete Wavelet Transform were used. In the spectrograms of the measured magnetic fields, the 1st–4th harmonics of the turbine shaft, generator shaft and also their side frequencies were identified. Significant changes of magnetic fields in time were identified in the area of 60–95% power. With the help of the Wavelet, transform intervals were identified where it is desirable to operate the turbine. The analyses of magnetic fields measurements performed on the power plant were compared with vibro-diagnostic principles.

6 January 2009 in Solid State Phenomena
Verified
Journal Article
Closed access
PDF file
MWMiroslaw Witos
Miroslaw Witos
RSRyszard Szczepanik
Ryszard Szczepanik
The intended aim of the paper was to present a short review of more than 15 years of experience of ITWL in the field of applying the signal of actual rotational speed (aperiodic and oscillation components thereof) to the expert diagnosing of aero-engines, including identification of low- and high-cycle fatigue (LCF, HCF) of critical structural members. What has been presented is some essential metrological bearings of the non-contact technique of measuring the engine’s rpm with some flexible key phasors (i.e. vibrating compressor/turbine blades). Also, methods of numerical analysis of measuring signals, in use nowadays, have been discussed. With the jet engine of the SO-3 type (in use on the TS-11 “Iskra” combat trainer) as an example, are discussed algorithms of both the identification of disadvantageous aeromechanical effects (energy state of the engine - i.e. the source of accelerated HCF wear of structural components) and the early detection of symptoms of fatigue failures to compressor blades and the bearing system. The discussed problems have been illustrated with examples selected as to emphasise practicalities of applying a new source of diagnostic information to ‘actively’ control the process of fatigue wear (HCF + LCF) of engine components and to forecast the engine health/maintenance status.

1 January 2013 in The Scientific World Journal
Verified
Journal Article
Open access
PDF file
MWMiroslaw Witos
Miroslaw Witos
The diagnostic and research aspects of compressor blade fatigue detection have been elaborated in the paper. The real maintenance and overhaul problems and characteristic of different modes of metal blade fatigue (LCF, HCF, and VHCF) have been presented. The polycrystalline defects and impurities influencing the fatigue, along with their related surface finish techniques, are taken into account. The three experimental methods of structural health assessment are considered. The metal magnetic memory (MMM), experimental modal analysis (EMA) and tip timing (TTM) methods provide information on the damage of diagnosed objects, for example, compressor blades. Early damage symptoms, that is, magnetic and modal properties of material strengthening and weakening phases (change of local dislocation density and grain diameter, increase of structural and magnetic anisotropy), have been described. It has been proven that the shape of resonance characteristic gives abilities to determine if fatigue or a blade crack is concerned. The capabilities of the methods for steel and titanium alloy blades have been illustrated in examples from active and passive experiments. In the conclusion, the MMM, EMA, and TTM have been verified, and the potential for reliable diagnosis of the compressor blades using this method has been confirmed.

1 January 2008 in Research Works of Air Force Institute of Technology
Verified
Journal Article
Open access
MWMiroslaw Witos
Miroslaw Witos
On the Modal Analysis of a Cracking Compressor Blade The paper deals with issues related to reliable recognition and prediction of health of steel compressor blades. It outlines symptoms that indicate the blade cracking, and identification methods that can be used during operation, maintenance and repairs/overhauls of turbine jet engines of the SO-3 type. An optical method involving laser measurements of blade vibration while on the excitation source is presented in details as it is implemented in the WZL-3 (Military Aviation Works No. 3). The method has been verified in practice and some findings from the verification process are discussed. Next, new testing capabilities offered by the method are presented, including identification of early symptoms of material fatigue (the strengthening and the weakening of the material) and the crack initiation. The topics under discussion have been illustrated with some examples taken while measuring modal properties typical of both defect-free and faulty blades as well as from fatigue tests conducted according to the LCF and HCF profiles. It has been proved that the analysis of resonance responses for specific modes of operation allows of reliable differentiation between material's fatigue and cracking.

16 July 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JTJustyna Tomaszewska
Justyna Tomaszewska
MWMiroslaw Witos
Miroslaw Witos
JKJerzy Kwasniewski
Jerzy Kwasniewski
Steel wire ropes used in transport and aerospace applications are critical components whose failure can lead to significant safety, operational, and environmental consequences. Current diagnostic practices based on magnetic rope testing (MRT) often suffer from signal misalignment and subjective interpretation, particularly under varying operational conditions or in polymer-impregnated ropes with delayed damage indicators. This study explores the application of the Dynamic Time Warping (DTW) algorithm to enhance the reliability of MRT diagnostics. The research involved analyzing long-term MRT recordings of wire ropes used in mining operations, including different scanning resolutions and signal acquisition methods. A mathematical formulation of DTW is provided along with its implementation code in R and Python. The DTW algorithm was applied to synchronize diagnostic signals with their baseline recordings, as recommended by ISO 4309:2017 and EN 12927:2019 standards. Results show that DTW enables robust alignment of time series with slowly varying spectra, thereby improving the comparability and interpretation of MRT data. This approach reduces the risk of unnecessary rope discard and increases the effectiveness of degradation monitoring. The findings suggest that integrating DTW into existing diagnostic protocols can contribute to safer operation, lower maintenance costs, and reduced environmental impact.

1 September 2013 in Solid State Phenomena
Verified
Journal Article
Closed access
PDF file
MIMarek Iwaniec
Marek Iwaniec
MWMiroslaw Witos
Miroslaw Witos
Maciej RoskoszMaciej Roskosz
Maciej Roskosz
Szymon GontarzSzymon Gontarz
Szymon Gontarz
This paper concerns the idea of using magneto-mechanical effects in prophylactic activities to reduce the risk of occurrence of an extensive blackout on high voltage (HV) lines. The subject matter of the paper is related to the event from April 8, 2008, which deprived approximately 600,000 recipients from 18 cities of the West Pomeranian voivodeship of power and caused millions in losses for the national economy. In theoretical considerations, the idea of diagnosing the technical state and level of effort of steel power line towers using the metal magnetic memory method (MMM) is presented, with a consideration of the methodology for obtaining a reference signal from the external magnetic field. The capabilities of the MMM method have been illustrated by examples of active and passive experiments. Finally, the authors indicated the need of IT support of MMM data analysis using a 3D model of the predicted distribution of the magnetic field in the vicinity of the tested object.