Mohamed Mansour

Mohamed Mansour

KIT, Karlsruhe, Baden-Württemberg, Germany
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 September 2024 in Photonics
Verified
Journal Article
Open access
PDF file
MMMohamed Mansour
Mohamed Mansour
AAAlaa M. Ali
Alaa M. Ali
FMFrederic Marty
Frederic Marty
TBTarik Bourouina
Tarik Bourouina
NGNoha Gaber
Noha Gaber
This paper investigates the integration of optical fibers into an on-chip Fabry–Pérot (FP) resonator to achieve high-quality (Q) factors, which is favorable in sensing applications. Initially designed for high-speed data transmission, optical fibers are now utilized in sensing applications because of their flexibility and sensitivity to optical phenomena. This article focuses on the role of single-mode fibers (SMF) and the geometry of different structures in enhancing light confinement within FP resonators. Two distinct on-chip designs utilizing SMFs are demonstrated, modeled, and experimentally evaluated. One achieves a Q-factor higher than 5200, demonstrating significant improvement in light confinement, while the other maximizes the spectral range between the resonant modes’ peaks, maximizing the sensing range through the wavelength shift. This is supported by visualized simulation and coupling efficiencies calculations for fundamental and higher-order modes for comprehensive analysis. Comparison with existing literature is also made, underscoring the advancements achieved by the presented approaches. The findings contribute to the development of microscale refractive index sensing applications, highlighting the vital role of optical fiber integration for high-performance sensing.

13 June 2025 in Chips
Verified
Journal Article
Open access
PDF file
AEAhmed Elsayed
Ahmed Elsayed
Samir Nabawy AboZydSamir Nabawy AboZyd
Samir Nabawy AboZyd
Abdelrahman TorayaAbdelrahman Toraya
Abdelrahman Toraya
MMMohamed Mansour
Mohamed Mansour
NGNoha Gaber
Noha Gaber
On-chip optical accelerometers can be a promising alternative to capacitive, piezo-resistive, and piezo-electric accelerometers in some applications due to their immunity to electromagnetic interference and high sensitivity, which allow for robust operation in electromagnetically noisy environments. This paper focuses on the characterization of an easy-to-fabricate tri-axial fiber-free optical MEMS accelerometer, which employs a simple assembly consisting of a light emitting diode (LED), a quadrant photodetector (QPD), and a suspended proof mass, measuring acceleration through light power modulation. This configuration enables simple readout circuitry without the need for complex digital signal processing (DSP). Performance modeling was conducted to simulate the LED’s irradiance profile and its interaction with the proof mass and QPD. Additionally, experimental tests were performed to measure the device’s mechanical sensitivity and validate the mechanical model. Lateral mechanical sensitivity is obtained with acceptable discrepancy from that obtained from FEA simulations. This work consolidates the performance of the design adapted and demonstrates the accelerometer’s feasibility for practical applications.

30 May 2023
Verified
Conference Paper
Closed access
MMMohamed Mansour
Mohamed Mansour
RSRabab A. Shalaby
Rabab A. Shalaby
ANAbdelrahman Nasser
Abdelrahman Nasser
KOKareem Owis
Kareem Owis
HKHussein Kotb
Hussein Kotb
DKDiaa Khalil
Diaa Khalil
In this work, an add/drop micro ring resonator is used to demultiplex eleven frequency lines having a separation of 200 GHz, which are provided by a frequency comb generator. The design of the Si 3 N 4 /SiO 2 TriPleX waveguide structure used for this aim is reported. The waveguide width is 2.2 μm and the heights of the two stacks are 100 and 175 nm for lower and upper layers, respectively. The central frequency of the eleven channels is 193.3 GHz. The ring radii ranges from 40 to 56 μm with the worst crosstalk of 27.23 dB. The validation of the design is executed by FDTD simulation and the S-matrix technique to get the overall response of each ring resonator. The main specifications are set to achieve 3 GHz bandwidth for each channel, reduce the crosstalk between channels, and minimize the radiation losses generated by the rings.

20 July 2022
Verified
Conference Paper
Closed access
AAAlaa M. Ali
Alaa M. Ali
MMMohamed Mansour
Mohamed Mansour
MAMohamed H. Sayed Ahmed
Mohamed H. Sayed Ahmed
NGNoha Gaber
Noha Gaber
FMFrederic Marty
Frederic Marty
TBTarik Bourouina
Tarik Bourouina
This work aims to present the numerical simulation of a micro-optical system consisting of a Fabry-Pérot resonator and micro-lenses used for hormonal detection. Ideally, the Fabry-Pérot cavity should have curved shape in 3D to confine the light in all directions inside the resonator. However, this 3D structure is not compatible with the planar microfabrication technology. Therefore, the design introduced in this work consists of an upright cylindrical lens and Fiber rod lens to confine the light in both horizontal and vertical directions before entering the cavity. The fabricated structure also includes a microfluidic channel that holds the fluid to be tested between the mirrors of the cavity. Both fluid mechanics simulations and optical simulations are conducted. The designed chip incorporates different Fabry-Pérot cavities that can be used to characterize different samples on the same chip with different sensitivities and detection ranges. The sensitivity of our device was tested by Estrogen hormone with different concentrations, and it is found to reach up to 400.25 nm/RIU.

25 July 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
MMMohamed Mansour
Mohamed Mansour
MEMustafa M. Elsayed
Mustafa M. Elsayed
AAAlaa M. Ali
Alaa M. Ali
ATAbdelrahman Toraya
Abdelrahman Toraya
NGNoha Gaber
Noha Gaber
The past decade has seen the rapid development of microthermal actuators designs; this is due to their wide usage in various sectors such as biomedical applications and communication. This study presents the experimental assessment, fabrication, and numerical simulation of a novel thermal actuator device applying the amplification theory to achieve competitive overall performance. The device consists of two L-shape lever and half-bridge amplification mechanisms accompanied by microthermal actuators forming all a compliant system. The input displacement is amplified at the output by about 3.55 as a multiplication ratio. Experimental characterization has been performed over a wide voltage range reaching 15 V and achieving 19 μm actuation. Considering how the material’s properties change with temperature and their effect on the simulation results has been proven critical upon comparing experimental with the numerical results. The simulation has shown consistency with experimental results only when employing temperature-dependent models up to a voltage of 12 V achieving 12.9 μm actuation, unlike assuming constant parameters which is widely used in literature that shows noticable deviation throughout characterization range. Additionally, when designing an effective micro electrothermal actuator, there are other parameters that need to be considered besides high output displacement. Therefore, the comparison with other designs has included all the main specifications that are of concern. The performance is discussed based on the main features of any thermal actuator: displacement, temperature, area, and applied voltage, all combined in a performance evaluation index (PEI). The importance of this index is that it evaluates the overall effectivness of a thermal actuator, whereas one can have excellent performance for one of aforementioned features at the expense of the others, which may degrade the total assessment. Our device shows the highest value of this index of 0.0021 μm/mm2/K/V at applied voltage of 10 V mapping to the lowest temperature profile at 617.5 K and smallest area among its credible counterparts.