Paper-based data acquisition and manual transfer between incompatible software or data formats during inspections of bridges, as done currently, are time-consuming, error-prone, cumbersome, and lead to information loss. A fully digitized workflow using open data formats would reduce data loss, efforts, and the costs of future inspections. On the one hand, existing studies proposed methods to automatize data acquisition and visualization for inspections. These studies lack an open standard to make the gathered data available for other processes. On the other hand, several studies discuss data structures for exchanging damage information among different stakeholders. However, those studies do not cover the process of automatic data acquisition and transfer. This study focuses on a framework that incorporates automatic damage data acquisition, transfer, and a damage information model for data exchange. This enables inspectors to use damage data for subsequent analyses and simulations. The proposed framework shows the potentials for a comprehensive damage information model and related (semi-)automatic data acquisition and processing.
Current bridge inspection practices rely on paper-based data acquisition, digitization, and multiple conversions in between incompatible formats to facilitate data exchange. This practice is time-consuming, error-prone, cumbersome, and leads to information loss. One aim for future inspection procedures is to have a fully digitized workflow that achieves loss-free data exchange, which lowers costs and offers higher efficiency. On the one hand, existing studies proposed methods to automatize data acquisition and visualization for inspections. These studies lack an open standard to make the gathered data available for other processes. On the other hand, several studies discuss data structures for exchanging damage information through out different stakeholders. However, those studies do not cover the process of automatic data acquisition and transfer. This study focused on a framework that incorporates automatic damage data acquisition, transfer, and a damage information model for data exchange. This enables inspectors to use damage data for subsequent analyses and simulations. The proposed framework shows the potentials for a comprehensive damage information model and related (semi-)automatic data acquisition and processing.
Cyclic freezing and thawing of concrete specimens are one of the main causes of cracking in concrete. Current procedures for assessing frost resistance of concrete in Germany rely mainly on the CIF and CDF tests that utilise qualitative estimation of cracks. Although these standard tests provide a general overview of the condition of concrete damage through the estimation of water saturation through capillary suction, mass of surface delamination, qualitative open surface damage, and relative dynamic modulus of elasticity, they do not take quantitative analysis of cracks directly into account. To facilitate this quantitative approach, cracks are studied in concrete samples exposed to specific standard cycles of freezing and thawing, then scanned using micro computed tomographic (µCT) imaging, and consequently cut for petrographic thin section analysis. The thin sections are scanned using light microscopy (LM). Deep learning frameworks were deployed to train semantic segmentation models to identify cracks, air pores, aggregate, and cement matrix. Both scanned modalities were co-registered using three experimental variations of varying processing complexity that rely on matching of Fourier-based shape descriptors and underlying features thereof to verify and validate the quality of segmentation inferred for various phases of concrete.
Cyclic freezing and thawing (FT) are a primary cause of cracking in concrete, yet current assessment procedures in Germany rely heavily on qualitative estimation using the International Union of Laboratories and Experts in Construction Materials, Systems and Structures (RILEM) capillary suction, internal damage and freeze-thaw (CIF) and Capillary de-icing freeze-thaw (CDF) tests. Although these standard tests provide a general overview of the condition of concrete damage in specimens through the estimation of water saturation through capillary suction, mass of surface delamination, qualitative open surface damage, and relative dynamic modulus of elasticity, they do not take quantitative analysis of voids, including cracks and air pores, directly into account. To address this, we propose a novel workflow utilizing deep learning-based semantic segmentation with Fourier-based slice-to-volume registration by combining 2D light microscopy (LM) of petrographic sections and 3D micro-computed tomography (CT). We segment cracks, air pores, and aggregates in both modalities and employ feature matching alongside spatial harmonics analysis for 3D shape description. The best proposed 3D registration framework through feature matching demonstrated a success rate of 89.75%, achieving a dissimilarity of 5.21% in relative root mean square error (RRMSE) terms and thereby significantly surpassing the performance of compared 2D-only methods adapted from the body of research. Our approach enables precise, automated, and verifiable quantification of voids across CT and LM modalities and paves the way for advanced computational modeling-based methods to investigate moisture transfer mechanisms for more accurate assessments of frost damage in concrete, service life prediction models, deep learning applications for multimodal data fusion, and more comprehensive FT damage simulations.
Creating as-is models from scratch is to this day still a time- and money-consuming task due to its high manual effort. Therefore, projects, especially those with a big spatial extent, could profit from automating the process of creating semantically rich 3D geometries from surveying data such as Point Cloud Data (PCD). An automation can be achieved by using Machine and Deep Learning Models for object recognition and semantic segmentation of PCD. As PCDs do not usually include more than the mere position and RGB colour values of points, tapping into semantically enriched Geoinformation System (GIS) data can be used to enhance the process of creating meaningful as-is models. This paper presents a methodology, an implementation framework and a proof of concept for the automated generation of GIS-informed and BIM-ready as-is Building Information Models (BIM) for railway projects. The results show a high potential for cost savings and reveal the unemployed resources of freely accessible GIS data within.