Mohamed Fathey Mohamed Atia

Dr. Mohamed Fathey Mohamed Atia

Agricultural Engineering, Ain Shams University, Cairo, Al Qāhirah, Egypt
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 April 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
Mahmoud A. AbdelhamidMahmoud A. Abdelhamid
Mahmoud A. Abdelhamid
Tarek Kh. AbdelkaderTarek Kh. Abdelkader
Tarek Kh. Abdelkader
HSHassan A. A. Sayed
Hassan A. A. Sayed
ZZZhao Zhang
Zhao Zhang
XZXiaohui Zhao
Xiaohui Zhao
Mohamed Fathey Mohamed AtiaMohamed Fathey Mohamed Atia
Mohamed Fathey Mohamed Atia
Urban areas face significant challenges, including a lack of green spaces, scarce water resources, environmental pollution, and elevated heat emissions, particularly in developing countries experiencing rapid population growth. Therefore, the study aims to advance sustainable urban agriculture by designing and evaluating a solar-powered smart rooftop irrigation system for peppermint cultivation. The system incorporates two drip irrigation setups—conventional and smart irrigation—powered by photovoltaic (PV) panels. The smart system integrates real-time monitoring of critical variables, including (1) soil moisture, (2) relative humidity, (3) PV panel temperature, and (4) PV panel current and voltage. Key performance metrics such as water and energy consumption, water use efficiency, energy productivity, and carbon dioxide emissions were evaluated for both systems. In addition, the economic analysis of the smart system was determined. Results revealed that the smart system reduced water and energy consumption by 28.1% compared to conventional irrigation. Additionally, the smart system achieved a notable reduction in carbon footprint, with CO2 emissions of 0.181 kg CO₂/m2/year compared to 0.252 kg CO₂/m2/year for the conventional system. The system’s economic analysis demonstrated a payback period of 5.6 years, highlighting its financial viability. This study underscores the transformative potential of solar-powered smart irrigation systems in enhancing food security, conserving water, reducing energy consumption, and mitigating carbon emissions in urban agriculture.

20 March 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
MAMahmoud Abdelhamid
Mahmoud Abdelhamid
MAM. F. Abdel-Salam
M. F. Abdel-Salam
KFKhaled Yehia Farroh
Khaled Yehia Farroh
WHWang Han
Wang Han
Mohamed Fathey Mohamed AtiaMohamed Fathey Mohamed Atia
Mohamed Fathey Mohamed Atia
Solar energy has become an energy source for a wide range of uses, including in solar cookers, due to its availability, cleanliness, environmental friendliness, and sustainability. In this study, an indirect solar cooker was investigated by measuring its thermal performance using a Graphene Oxide (GO) nanofluid. Water, GO (250 ppm)-water, and GO (500 ppm)-water were used as heat transfer fluids. The experimental set-up consisted of the cooking part and a solar collector, which are the two essential elements in indirect solar cookers. The cooking part was a wooden box solar cooker, and the parabolic trough solar collector was a polished stainless steel structure. The solar cooker was assessed using the stagnation test and load test as well as energy and exergy measurements. According to the test results, the averaged F1 was 0.1 for the base fluid water, 0.11 for GO (250 ppm)-water, and 0.13 for GO (500 ppm)-water. In addition, using a GO nanofluid instead of water in the solar cooker, the system’s thermal performance, energy, and exergy efficiency were improved. The use of the GO (250 ppm)-water and GO (500 ppm)-water nanofluids instead of water in the system improved the overall energy efficiency of the system by 3.3 and 4.2%. Moreover, using GO (500 ppm)-water allowed for achieving superior performance.

1 July 2016 in Misr Journal of Agricultural Engineering
Verified
Journal Article
Closed access
PDF file
Mohamed Fathey Mohamed AtiaMohamed Fathey Mohamed Atia
Mohamed Fathey Mohamed Atia
MMM. M. Mostafa
M. M. Mostafa
MEM. A. El-Nono
M. A. El-Nono
MAM. F. Abdel-Salam
M. F. Abdel-Salam
Milk pasteurization process consumes a large amount of energy, using of solar energy for pasteurization process reduces the required conventional energy. Experimental study was conducted to equip a solar concentrator with dual axis sun tracking device and utilizing it for milk pasteurization. The tracking device was a closed-loop system, it was worked based on the contrast of sunlight levels using light-dependent resistors (LDRs) and op-amp chip. The thermal system was comprised of solar parabolic dish, energy conversion subsystem, and heat exchanger. The system was able to pasteurize about 260 ml of milk at 73 ˚C in average time 110 seconds. The average hourly productivity of solar pasteurized milk was about 7.5 liters. The tracking device was able to track the motion of sun and keep the solar concentrator in a straight axis to the sun, and it had a feature of the low cost. The results indicated that the tracking device was led to increase of the cumulative daily heat gain by approximately 59 %. The temperature of the absorber plate was reached 190 ˚C with the automatic tracked concentrator while it was 91 ˚C with the non-tracked on March 2016.

1 April 2018 in Arab Universities Journal of Agricultural Sciences
Verified
Journal Article
Closed access
FSFatma M. Shaaban
Fatma M. Shaaban
MMM. M. Mostafa
M. M. Mostafa
MAM. F. Abdel-Salam
M. F. Abdel-Salam
Mohamed Fathey Mohamed AtiaMohamed Fathey Mohamed Atia
Mohamed Fathey Mohamed Atia
Study aimed to develop and evaluate the thermal performance of truncated pyramid solar cooker viz non-modified and modified. Tests have been carried out in Department of Agricultural Engineering, Faculty of Agriculture, Ain Shams University, Shubra El-Kheima, Egypt (Latitude 30o11’ N, Longitude 31o24’ E). The solar cookers were not loaded, and loaded with 0.5, 1.0 and 2.0 liter of water. The modified truncated pyramid was filled with different quantities of rice. The thermal performance was evaluated by using first figure of Merit, second figure of Merit and energy efficiency. textural properties of rice and biscuits and cost analysis were measured. The absorber plate temperature of the modified was 51. 8 % higher than the absorber plate temperature of the non-modified cooker. The calculated values of first figure of Merit was 0.102 and 0.08 oC.m2/W with modified and non-modified truncated pyramid cooker types, respectively. The value of second figure of Merit was 0.239 and 0.523 for modified and non-modified truncated pyramid cooker, respectively.

1 March 2024 in Egyptian Journal of Soil Science
Verified
Journal Article
Open access
PDF file
MSM.A. Salama
M.A. Salama
YGY.G.M. Galal
Y.G.M. Galal
MHM.A. Hussien
M.A. Hussien
Mohamed Fathey Mohamed AtiaMohamed Fathey Mohamed Atia
Mohamed Fathey Mohamed Atia
IEI.F.M. Eldehn
I.F.M. Eldehn
A pot experiment in the open field was conducted to evaluate the performance of a green bean crop under different irrigation water regimes and two types of solar still (Active and Passive). Irrigation water was applied at regimes of 170, 142, and 114 mm in season, representing T1 (100% WHC), T2 (80% WHC), and T3 (70% WHC) from water holding capacity (WHC), respectively. During the measurement months, the average monthly output of active solar still productivity is 1790 ml m-2 with an average overall thermal efficiency (ηactive) of 5.9%, while in the passive solar still productivity is 1308 ml m-2 with an average overall thermal efficiency (ηpassive) of 17.6%. The desalinated water applied at T1 enhanced growth characteristics, yield, and improved water productivity (WP) and water use efficiency (WUE) compared to T2 and T3 deficit water regimes. Similarly, increasing irrigation water availability to plants improved NPK nutrient uptake by various plant parts. The 15N/14N ratio analysis revealed that under all irrigation water regimes, the absolute values of the N portion derived from fertilizer were higher in pods, followed by shoots, and then roots. In contrast with the nitrogen derived from fertilizer (Ndff), the absolute values of Ndff in pods, shoots, and roots seem significantly higher under T1 than those indicated at either the T2 or T3 regimes. In this respect, the nitrogen use efficiency (NUE) reached nearly 64% and 51% for pods and shoots under the T1 regime, while those for roots were still negligible. These percentages of NUE in pods and shoots tended to decrease gradually with increasing water deficits (T2 and T3).

1 January 2024 in Revista Brasileira de Engenharia Agrícola E Ambiental
Verified
Journal Article
Open access
PDF file
Mahmoud A. AbdelhamidMahmoud A. Abdelhamid
Mahmoud A. Abdelhamid
SRSaif A. Rawdhan
Saif A. Rawdhan
SSShereen S. Shalaby
Shereen S. Shalaby
Mohamed Fathey Mohamed AtiaMohamed Fathey Mohamed Atia
Mohamed Fathey Mohamed Atia
The ripeness of tomatoes has a direct impact on their quality. This study aimed to develop mathematical models to determine and monitor tomato ripeness based on chlorophyll fluorescence parameters. Three varieties of tomatoes (Alkazar, Lezginka, and Rosanchik) with five ripening stages (green, breaker, pink, light red, and red) were examined using chlorophyll fluorescence analysis. Chlorophyll fluorescence variables (Variable - Fv, maximum - Fm, initial - F0, and Fv/Fm ratio) were assessed at five stages of maturation. Five mathematical models were proposed for each tomato variety examined to determine the relationship between chlorophyll fluorescence parameters and ripening stages. The experimental results revealed that tomato maturity could be determined using chlorophyll fluorescence. It was found that as the tomato fruits ripened, the chlorophyll fluorescence parameters, such as Fv, Fv/Fm, Fm, and F0, gradually decreased. The proposed models allowed estimation of the ripening stage of all three tomato varieties. The highest R2 (0.99) was obtained using chlorophyll fluorescence parameters together.