Mohammad Al-Smadi

Dr. Mohammad Al-Smadi

Electrical and Computer Engineering, University of Detroit Mercy, Detroit, Michigan, USA
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 October 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
MAMohammad Al-Smadi
Mohammad Al-Smadi
Jaber A Abu QahouqJaber A Abu Qahouq
Jaber A Abu Qahouq
This article presents a current-mode controller for switched-inductor topology to achieve voltage balancing between battery cells or modules in a battery pack while operating at peak efficiency. The presented method yields several advantages and/or eliminates several drawbacks of the existing conventional fixed duty cycle scheme. Among these advantages: 1) the balancing current is well controlled instead of being a function of battery cells’ voltages and system parasitic elements, which might result in exceeding the current ratings of the components, and 2) the balancing current reference is selected such that the balancing circuit operates at its maximum efficiency point and, therefore, yielding lower balancing power losses. This article also presents a battery balancing algorithm for utilization with the presented controller that achieves open circuit voltage balancing, which is a more accurate indicator of state-of-charge compared to terminal voltage. Experimental results obtained from a laboratory prototype of a three-cell battery pack are presented to evaluate the presented current control and balancing method under different modes of operation.

11 September 2020 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
MAMohammad Al-Smadi
Mohammad Al-Smadi
YMYousef Mahmoud
Yousef Mahmoud
Partial shading is a serious problem limiting the efficiency of photovoltaic (PV) systems. Differential power processing (DPP) architectures have been proposed to mitigate mismatch power losses caused by partial shading. However, maximum power point tracking (MPPT) for DPP converters is still an area of research. Instead of employing heuristic techniques, the proposed method is deterministic that can uniquely determine the respective maximum power points (MPPs) for the DPP Converters relying on the PV mathematical model and provided incident irradiances. The irradiances of the submodules are estimated using captured images obtained by an optical camera. Unlike the existing methods in literature which either produce fast transient response or accurate steady state tracking, the proposed method provides both fast transient response and accurate steady state output without oscillations. Moreover, the proposed approach does not need communication between converters or current sensing for the MPPT. The effectiveness of the proposed method is validated both by Simulink simulations and experimentally.

1 October 2018
Verified
Conference Paper
Closed access
MAMohammad Al-Smadi
Mohammad Al-Smadi
YMYousef Mahmoud
Yousef Mahmoud
Photovoltaic (PV) system characteristics are significantly affected by shading conditions and thus the power productivity of the system is subject to vary accordingly. Therefore, this triggers the need for a broad understanding for the power losses caused by partial shading conditions (PSC). This paper presents an indicative analysis of various kinds of PV power losses associated with different shading scenarios that are likely to take place in real PV system based on MATLAB simulations. Furthermore, to address the impact of bypass diodes implementation, the analysis takes the case of unbypassed PV modules into consideration. The power losses categories are investigated in different PV configurations to highlight the role of system's arrangement and size in power losses associated with partial shading conditions with notable shortcomings and generalizations.

6 October 2020 in IET Renewable Power Generation
Verified
Journal Article
Closed access
MAMohammad Al-Smadi
Mohammad Al-Smadi
YMYousef Mahmoud
Yousef Mahmoud
Operating photovoltaic (PV) systems under partial shading conditions results in significant power losses. To mitigate partial shading effects, distributed maximum power point tracking (DMPPT) architectures have been proposed. An emerging DMPPT technique represented by PV module cascaded converters (MCCs) has been widely reported in the literature. In this architecture, a DC converter is allocated for each PV module to process and maximise its power. In this sense, mismatch effects are mitigated between PV modules. While MCC architecture has prominent advantages and value‐added features, its challenges and limitations cannot be ignored. This study presents a comprehensive review of the state of the art of PV MCC architecture to help readers realise the progress of this DMPPT technique. Several points are extensively discussed and analysed including concept realisation and analysis, DC converter topologies and design optimisation, DMPPT performance limitations, DMPPT control, and protection. The main concepts are reemphasised through a set of simulations. Finally, a list of potential research areas in this field is introduced.

29 March 2025 in Batteries
Verified
Journal Article
Open access
PDF file
MAMohammad Al-Smadi
Mohammad Al-Smadi
Jaber A Abu QahouqJaber A Abu Qahouq
Jaber A Abu Qahouq
This paper presents data-driven impedance-based state of health (SOH) estimation for commercial lithium-ion batteries across an SOH range of ~96% to ~60%. Battery health indicators at the transition frequency of the battery impedance Nyquist plot are utilized to develop an SOH estimator based on an artificial neural network (ANN). In addition, two more ANN-based SOH estimators utilizing some impedance magnitude and phase values are developed. Spearman correlation analysis is utilized to identify the frequency points at which the impedance magnitude and phase values show strong correlations with SOH values and are thus utilized as SOH indicators. The performance evaluation of the developed SOH estimators shows that the maximum root mean square error (RMSE) is equal to 1.39%, the maximum mean absolute error (MAE) is equal to 1.25%, the maximum mean absolute percentage error (MAPE) is equal to 1.55%, and the minimum coefficient of determination (R2) is equal to 0.983.

1 October 2018
Verified
Conference Paper
Closed access
MAMohammad Al-Smadi
Mohammad Al-Smadi
YHYifeng Hu
Yifeng Hu
YMYousef Mahmoud
Yousef Mahmoud
The highly nonlinear, stochastic nature of photovoltaic (PV) systems impose difficulty in modeling and control design. The controller is employed to efficiently adjust the operating point decided by maximum power point tracking (MPPT) algorithm instead of directly controlling the duty cycle of the DC-DC converters linked to PV system. This paper proposes a linear quadratic regulator (LQR) based tuned PID controller for PV voltage control for a PV system interfaced with a boost converter topology. The proposed model-based controller design is validated through simulation with corresponding stability and robustness check.