In this research, a new application using broadband ship noise as a source-of-opportunity to estimate the scattering field from the underwater targets is reported. For this purpose, a field trial was conducted in collaboration with JASCO Applied Sciences at Duncan’s Cove, Canada in September 2020. A hydrophone array was deployed in the outbound shipping lane at a depth of approximately 71 m to collect broadband noise data from different ship types and effectively localize the underwater targets. In this experiment, a target was installed at a distance (93 m) from the hydrophone array at a depth of 25 m. In this study, a matched field processing (MFP) algorithm is utilized for localization. Different propagation models are presented using Green’s function to generate the replica signal; this includes normal modes in a shallow water waveguide, the Lloyd-mirror pattern for deep water, as well as the image model. We use the MFP algorithm with different types of underwater environment models and a proposed estimator to find the best match between the received signal and the replica signal. Finally, by applying the scatter function on the proposed multi-channel cross correlation coefficient time-frequency localization algorithm, the location of target is detected.
This study introduces an algorithm for quantifying oceanic wind speed and identifying sound sources in the local underwater soundscape. Utilizing low-complexity metrics like one-minute spectral kurtosis and power spectral density levels, the algorithm categorizes different soundscapes and estimates wind speed. It detects rain, vessels, fin and blue whales, as well as clicks and whistles from dolphins. Positioned as a foundational tool for implementing the Ocean Sound Essential Ocean Variable (EOV), it contributes to understanding long-term trends in climate change for sustainable ocean health and predicting threats through forecasts. The proposed soundscape classification algorithm, validated using extensive acoustic recordings (≥32 kHz) collected at various depths and latitudes, demonstrates high performance, achieving an average precision of and an average recall of through optimized parameter tuning via a genetic algorithm. Here, wind speed is determined using a cubic function with power spectral density (PSD) at 6 kHz and the MASLUW method, exhibiting strong agreement with satellite data below 15 m/s. Designed for compatibility with low-power electronics, the algorithm can be applied to both archival datasets and real-time data streams. It provides a straightforward metric for ocean monitoring and sound source identification.
1 March 2023 in The Journal of the Acoustical Society of America
The study of underwater soundscapes, pioneered by Dr. Jeff Nystuen, includes information about geophonic, biological, and anthropogenic processes, many of which have distinct spectral characteristics. The contributors to the underwater ambient sound field can be quantified and classified using knowledge of these spectra. Long-term acoustic data recordings from a wide variety of depths and locations with high sampling frequencies have been analyzed to develop a robust soundscape classification algorithm based on Dr. Nystuen’s methods. Each one-minute of data has been evaluated to classify the soundscape into wind, rainfall, drizzle, heavy shipping, light shipping, other vessel activity, and biological phenomena. The power spectral density (PSD) level at twelve frequencies in the range of 0.03–30 kHz, as well as the spectral slope for the frequency range between 8 and 15kHz and kurtosis are used for the passive classification algorithm. After classification, the wind speed was quantified as a cubic function of PSD at 6 kHz and recording depth. The wind speed estimated from the acoustics compared very well to satellite data for speeds lower than 15 m/s. The classification algorithms are being embedded on a processor using Xilinx’s Zynq System-on-Chip that produces a 32-kHz hybrid millidecade spectrum in real-time on a logarithmic scale.
The purpose of this article is to localize the underwater targets based on the reflecting the noise of the commercial ships propeller rotation from the targets. Full details of the commercial ships including the type of ships, their speed and geographic location are available using satellites and global positioning system (GPS). The proposed method has fewer challenges and limitations than existing mechanisms such as wireless sensor networks. In the proposed technique, the produced noise of spinning propellers (in cavitation or non-cavitation mode) plays the role of pings in active sonars. The noise is continuously released from the propeller and is reflected from the underwater targets. The recurrent echo is continuously received by the towable hydrophone array. The geographic location of this array is available at any moment. Using the existing localization algorithms, position of target is determined. So this idea uses the existing signals in the environment for target localization. The proposed method was simulated by the COMSOL and MATLAB.
28 February 2020 in International Journal of Engineering and Advanced Technology
The purpose of this article is to localize underwater objects based on the noise reflection of the propeller rotation in cavitation mode. In the proposed method, the propeller noise, which plays the role of pings in active sonar, is modeled by the Wittekind method. As such, an echo is continuously received by a vertical and uniform linear hydrophone array due to reflection from the underwater targets. The challenges associated with the underwater channels are simulated by the ocean model in COMSOL. Specifically, to model the propagation of underwater acoustic in this channel, the Helmholtz equation is solved using COMSOL. Finally, localization is performed by comparing the Delay & Sum algorithm and the multiple signal classification (MUSIC) algorithm in MATLAB. According to the simulation results, the proposed method is able to detect the position of the target and the propeller approximately, although the multipath phenomenon causes adverse effects on the results. The narrowband MUSIC algorithm is used in the proposed method at the frequency of the strongest intensity.