Improving the efficiency of well drilling process in a reservoir is directly related to subsequent well flow rates. Drilling of deviated and horizontal wells is often accompanied by an increase in pressure losses due to flow resistance caused by small size of the annular space. An important role in such conditions is played by the quality of borehole cleaning and transport capacity of drilling fluid, which is directly related to the rheological parameters of the drilling fluid. The main viscosifiers in modern drilling fluids are polymer reagents. They can be of various origin and structure, which determines their features. This work presents investigations that assess the effect of various polymers on the rheological parameters of drilling fluids. Obtained data are evaluated taking into account the main rheological models of fluid flow. However, process of fluid motion during drilling cannot be described by only one flow model. Paper shows experimentally obtained data of such indicators as plastic viscosity, dynamic shear stress, non-linearity index and consistency coefficient. Study has shown that high molecular weight polymer reagents (e.g., xanthan gum) can give drilling fluid more pronounced pseudoplastic properties, and combining them with a linear high molecular weight polymer (e.g., polyacrylamide) can reduce the value of the dynamic shear stress. Results of the work show the necessity of using combinations of different types of polymer reagents, which can lead to a synergetic effect. In addition to assessing the effect of various polymer reagents, the paper presents study on the development of a drilling fluid composition for specific conditions of an oil field.

Drilling fluids play an important role in the construction of oil and gas wells. Furthermore, drilling of oil and gas wells at offshore fields is an even more complex task that requires application of specialized drilling muds, which are non-Newtonian and complex fluids. With regard to fluid properties, it is necessary to manage the equivalent circulation density because its high values can lead to fracture in the formation, loss of circulation and wellbore instability. Thus, rheology of the used drilling mud has a significant impact on the equivalent circulation density. The aim of the present research is to develop compositions of drilling muds with a low solids load based on salts of formate acid and improve their rheological parameters for wells with a narrow drilling fluid density range. Partially hydrolyzed polyacrylamide of different molecular weights was proposed as a replacement for hydrolized polyacrylamide. The experiment was conducted on a Fann rotary viscometer. The article presents experimentally obtained data of indicators such as plastic viscosity, yield point, nonlinearity index and consistency coefficient. Experimental data were analyzed by the method of approximation. Analysis is performed in order to determine the most suitable rheological model, which describes the investigated fluids’ flow with the least error.

With the depletion of traditional energy resources, the share of heavy-oil production has been increasing recently. According to some estimates, their reserves account for 80% of the world’s oil resources. Costs for extraction of heavy oil and natural bitumen are 3–4 times higher than the costs of extracting light oil, which is due not only to higher density and viscosity indicators but also to insufficient development of equipment and technologies for the extraction, transportation, and processing of such oils. Currently, a single pipeline system is used to pump both light and heavy oil. Therefore, it is necessary to take into account the features of the heavy-oil pumping mode. This paper presents mathematical models of heavy-oil flow in oil-field pipelines. The rheological properties of several heavy-oil samples were determined by experiments. The dependencies obtained were used as input data for a simulation model using computational fluid dynamics (CFD) methods. The modeling condition investigates the range of shear rates up to 300 s⁻¹. At the same time, results up to 30 s⁻¹ are considered in the developed computational models. The methodology of the research is, thus, based on a CFD approach with experimental confirmation of the results obtained. The proposed rheological flow model for heavy oil reflects the dynamics of the internal structural transformation during petroleum transportation. The validity of the model is confirmed by a comparison between the theoretical and the obtained experimental results. The results of the conducted research can be considered during the selection of heavy-oil treatment techniques for its efficient transportation.

This paper considers the issue of associated petroleum gas utilization during hydrocarbon production in remote petroleum fields. Due to the depletion of conventional oil and gas deposits around the globe, production shifts to hard-to-recover resources, such as heavy and high-viscosity oil that requires a greater amount of energy to be recovered. At the same time, large quantities of associated petroleum gas are extracted along with the oil. The gas can be utilized as a fuel for power generation. However, even the application of combined power modes (combined heat and power and combined cooling heat and power) cannot guarantee full utilization of the associated petroleum gas. Analysis of the electrical and heat loads’ graphs of several oil fields revealed that the generated thermal energy could not always be fully used. To improve the efficiency of the fuel’s energy potential conversion, an energy system with a binary power generation cycle was developed, consisting of two power installations—a main gas microturbine and an auxiliary steam turbine unit designed to power the technological objects in accordance with the enterprise’s power load charts. To provide for the most complete utilization of associated petroleum gas, a gas-to-liquid system is introduced, which converts the rest of the gas into synthetic liquid hydrocarbons that are used at the field. Processing of gas into various products also lowers the carbon footprint of the petroleum production. Application of an energy system with a binary power generation cycle makes it possible to achieve an electrical efficiency up to 55%, at the same time maintaining high efficiency of consumers’ energy supply during the year. The utilization of the associated petroleum gas in the developed system can reach 100%.

Lost circulation is considered a time-consuming, costly problem during the construction of oil and gas wells. There are several preventive techniques to mitigate this problem. Stress cage technology is a mechanical lost circulation method, in which the formation at the wellbore wall is strengthened to stop the creation of induced fractures as one of the main causes of lost circulation. In this research, a two-dimensional numerical model, considering the elastic, poro-elastic, and thermo-poro-elastic behavior of the rock, is built to investigate the effectiveness of the stress cage method. Results show that better performance of the technology is achieved if the fractures are bridged close to their apertures. Additionally, it was found that the difference between the elastic, poro-elastic, and thermo-poro-elastic models is slightly visible. The conclusion states that the application of the stress cage methods leads to an increase in hoop stress and subsequent formation fracture gradient.

This paper discusses problems associated with water-based drilling fluids used for drilling formations with abnormally high pressure. The available solutions are suitable for a narrow range of applications, especially when weighted muds should be used. This paper reviews the experience of searching and developing a new type of drilling mud based on saturated brines. With the referenced papers as the basis, the authors developed compositions of such brine-based drilling muds. A distinctive feature of the considered compositions is the absence of barite, which is often used as a weighting agent. The paper presents a methodology for creating and investigating the proposed drilling fluids. The rheological properties and thermal stability of the muds at various temperatures were studied. The results show that proposed drilling fluids can be efficiently used for drilling formations with abnormally high pressure. It is assumed that the developed muds have greater versatility than analogues.