Enhancing concrete’s resilience against freeze–thaw (F-T) cycles is a critical challenge in civil engineering, especially in cold climates, where repeated freezing and thawing lead to structural degradation. This review explores the effectiveness of various additives, including supplementary cementitious materials (SCMs) and chemical admixtures, in improving concrete durability under F-T conditions. Factors influencing F-T resistance include the type and percentage of SCM replacement, the water–cement ratio, pore structure refinement, and air entrainment. The mechanisms by which additives enhance the durability—such as reducing the permeability, improving the microstructure, and increasing the compressive strength—are examined through an extensive review of experimental studies. The findings indicate that manufactured additives, such as silica fume, metakaolin, nano-SiO2, and graphene oxide, significantly enhance the F-T durability by densifying the concrete matrix and mitigating internal damage. In contrast, natural additives, including rice husk ash and zeolite, show potential but require optimization to match the performance of industrial SCMs. Additionally, the preparation and treatment methods of these materials play a crucial role in their effectiveness. This review provides insights into optimizing concrete formulations to enhance the longevity and sustainability, offering practical recommendations for the use of SCMs in cold climates.
The sudden increase in industrialization has reduced the availability of natural building materials and triggered the growing awareness of sustainable practices within the construction industry. The study presented here deals with marble powder, which is one of the by-products obtained from the marble industry, as a cement replacement in concrete mixtures. The main aims will be to investigate the impact of marble powder waste materials on the mechanical properties of concrete and to promote the recycling of various industrial wastes for environmental sustainability. Material testing was conducted with the levels of substitution of marble powder for cement ranging from 0% to 50%, and the resulting concrete was evaluated for compressive and tensile strength over different curing periods. The results show that concrete compressive strength and tensile strength are most efficiently improved when marble powder replacement is up to 10–15%, attaining its full potential after 28 days. Beyond this replacement level of 15%, the mechanical properties decrease, suggesting that higher substitution levels may not be effective. This paper consolidates findings, provides a novel comparative analysis, and addresses key challenges regarding the use of marble powder, providing room for the future industrial development of supplementary cementitious materials (SCMs), eventually leading to sustainability in the construction sector.
The durability of reinforced concrete structures is significantly affected by the carbonation process, which decreases the alkalinity of the pore solution and initiates corrosion of the steel reinforcement. However, the square roots of time equations, which are Fickian diffusion-based, are not able to accurately capture the nonlinear interactions of material properties with environmental factors. To overcome this limitation, this research introduces a novel hybrid model based on the integration of a physics-informed neural network (PINN) with residual regression via CatBoost, a categorical boosting algorithm. Using an expanded dataset of 6000 samples, the first stage of the model, which is based on the physics-informed neural network, is able to learn the underlying physics of the diffusion process by imposing monotonicity constraints. The second stage of the model, which is based on the CatBoost algorithm, is able to learn the residuals of the nonlinear interactions of factors such as the curing time, water–cement ratio, and supplementary cementitious material reactivity, which are not captured by the underlying physics of the diffusion law. Data augmentation via physics-based resampling increased the dataset from 3000 to 6000 samples. Validation of the model using 1200 samples resulted in R2 = 0.871, MAE = 15.362, and RMSE = 24.37. SHAP confirmed that the model was physically consistent with the principles of concrete technology, reversing the counterintuitive linear correlations to accurately capture the protective effect of longer curing times. The suggested framework offers a practical method for enhancing durability evaluation and aiding the maintenance and service-life management of reinforced concrete structures.