M.Reza Pouranian

Dr. M.Reza Pouranian

Purdue University

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 June 2019 in Environments
Verified
Journal Article
Open access
PDF file
MPM.Reza Pouranian
M.Reza Pouranian
MSMehdi Shishehbor
Mehdi Shishehbor
During recent decade, the pavement sustainability has received much attention by road agencies, companies, governments and research institutes. The aim of this paper is to introduce and evaluate the sustainability of the technologies developed or underdeveloped to address environmental issues of asphalt mixtures, and the waste materials and by-products that can be recycled and reused in asphalt production. Warm Mix Asphalt (WMA) technology, the most popular waste materials to substitute neat binder (crumb rubber modifier (CRM), recycled plastic (RP), vacuum tower bottoms (VTB)) and/or virgin aggregates (reclaimed asphalt pavement (RAP), reclaimed asphalt shingles (RAs), construction and demolition (C and D) wastes, steel and copper slags), and bio-binders were evaluated with respect to their environmental and economic benefits and engineering performance as the main components of pavement sustainability. The performance evaluation was carried out by examining rutting, moisture susceptibility, thermal and fatigue cracking resistance. Two main environmental impacts, greenhouse gas (GHG) emission, and energy consumption were considered to study the environmental effects of these technologies and materials. Additionally, the economic effect was investigated considering initial cost and long-term benefit. Results of investigation illustrated that although each individual technology and waste material is valuable in terms of performance and/or the environment, specific combinations such as WMA + RAP, WMA + CRM, RAP + CRM, and WMA + CRM + RAP lead to further benefits. Notably, these combinations suffer from a lack of comprehensive economic analysis, thus, their sustainability cannot be fully assessed and is prone to future studies.

1 March 2020 in Powder Technology
Verified
Journal Article
Closed access
MPM.Reza Pouranian
M.Reza Pouranian
MSMehdi Shishehbor
Mehdi Shishehbor
JHJohn E. Haddock
John E. Haddock

30 August 2019 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
MPM.Reza Pouranian
M.Reza Pouranian
JHJohn E. Haddock
John E. Haddock
Aggregate size distribution is an important parameter in asphalt mixture design and performance. The main objective of this study is to develop a framework to define the aggregate structure of asphalt mixtures when fine and coarse aggregate stockpiles are blended. To develop this framework, an analytical model for binary mixtures is proposed. The model considers the effect of size ratio and air volume between the particles on the aggregate structure and packing density of binary mixtures. Based on this model, three aggregate structures, namely coarse pack (CP), dense pack (DP) and fine pack (FP), are defined. The model is validated using a series of 3D discrete element simulation. Furthermore, the simulation of multi-sized aggregate blends using two representative sizes for fine and coarse stockpiles was carried out to apply the proposed analytical model to actual aggregate blends. In order to assess how well the model applies to asphalt mixtures, compaction parameters including compaction slope (CS), initial density (Nini), locking point and compaction energy index (CEI) were analyzed. The numerical simulations verify the proposed analytical model can satisfactorily determine the particle structure of binary and multi-sized asphalt mixture gradations and can be used to better design asphalt mixtures for improved performance.

20 November 2018 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
MPM.Reza Pouranian
M.Reza Pouranian
RIReza Imaninasab
Reza Imaninasab
MSMehdi Shishehbor
Mehdi Shishehbor
The aim of this study is to investigate the influence of temperature and stress level on the rutting performance of modified stone matrix asphalt (SMA). flow number (FN) test at three stress levels of 250, 350 and 450 kPa and at different temperatures of 40°C, 50°C and 60°C was performed on unmodified, ethylene-vinyl-acetate (EVA) and styrene-butadiene-styrene (SBS) modified SMA. Also, indirect resilient modulus was conducted to assess and compare the elastic response of modified asphalt mixtures. It was found that although EVA has greater rutting resistance than SBS at 40°C, its FN values drop below the SBS ones at 60°C due to the higher temperature sensitivity. Furthermore, the stress sensitivity of rutting performance decreases with temperature increase. Statistical analysis of the obtained results revealed that temperature always has a significant influence on FN values while the effect of stress level is significant just at 40°C. Also, although additives improve the FN significantly, there is the only slight difference between them.

27 January 2019 in Petroleum Science and Technology
Verified
Journal Article
Closed access
MSMehdi Shishehbor
Mehdi Shishehbor
MPM.Reza Pouranian
M.Reza Pouranian
MRMajid Ramezani
Majid Ramezani
Performance of the nanoparticle-modified asphalt binder is greatly influenced by adhesion properties between asphalt binder and nanoparticle. In this work, the adhesion properties of crude oil fractions (e.g., Saturate, Asphaltene, Resin and Aromatic components of asphalt binder), graphene and mineral aggregates (silicon dioxide) at various temperatures are investigated through molecular dynamic simulation and REAXFF force field. The results from SARA-graphene interface demonstrations that aromatic and asphaltene have 30% higher adhesion properties than saturate and resin. Also, while using graphene is valuable for the adhesion properties of the binder, it has no significant advantage over binder in binder-aggregate interactions.

1 September 2020 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
PDF file
MPM.Reza Pouranian
M.Reza Pouranian
JHJohn E. Haddock
John E. Haddock
In this study, the effect of aggregate gradation on asphalt mixture compactability was investigated. Based on different combinations of coarse and fine aggregates, four gradation zones were defined: coarse pack, coarse dense pack, fine dense pack, and fine pack. Two main compaction parameters (the compaction slope and initial density) and three gradation parameters (chosen to describe the representative size and uniformity of the gradation) were compared. Statistical analyses indicated a significant correlation between the two compaction parameters as response variables and three gradation parameters as explanatory variables. These relationships were used to determine the optimum aggregate gradation with respect to asphalt mixture compactability and rutting performance. The models developed using the gradation parameters were used with two independent data sets (one from a laboratory experiment and one from a field project) to show that the parameters can predict the compactability behavior of asphalt mixtures.