This study is performed on the numerical investigation of electro-magnetohydrodynamic (EMHD) radiating fluid flow nature along an infinitely long vertical Riga plate with suction in a rotating system. The prevailing equations are generated from the Navier–Stokes’ and energy equations. A uniform suction velocity is introduced to control the flow. The prevailing boundary layer (BL) equations are the stuff to delineate the mechanical features of the flowing nature along with the electromagnetic device (Riga plate). Accordingly, the use of usual transformations on the equations transformed those into a coupled dimensionless system of non-linear partial differential equations (PDEs). After conversion, the elucidation of the set of equations is conducted numerically by an explicit finite difference method (FDM). The criteria for stable and converging solutions are constructed to find restrictions on various non-dimensional parameters. The retrieved restrictions are $$P_{r} \ge 0.19,\,$$ $$R_{d} \ge 0.1,\,\,$$ $$S \ge 1,$$ $$E_{c} = 0.01\,\,$$ and $$0 < R \le 0.1$$ . Furthermore, sensitivity tests on mesh and time as well as comparison within the literature have been demonstrated in graphical and tabular form. Finally, the important findings of the non-dimensional parameters influences have been portrayed in graphical manner by using the MATLAB R2015a tool. A substantial uprise is noted for both the velocities (secondary and primary) under the rising actions of the modified Hartmann number, whereas the suction parameter suppresses both the velocities.
This study is conducted on the magneto-hydrodynamics (MHD) boundary layer (BL) heat and mass transfer flow of thermally radiating and dissipative fluid over an infinite plate of vertical orientation with the involvement of induced magnetic field and thermal diffusion. The fluid motion is controlled by uniform suction. The constant heat and mass fluxes at the boundary (plate) have been considered to establish the boundary conditions. The foremost prevailing equations are converted into non-linear dimensionless partial differential equations (PDEs) by applying usual transformations. An efficient explicit finite difference method (FDM) has been performed to reckon the solution of the system of non-linear coupled PDEs in a numerical manner. To ensure the converging nature of the solutions, close observation and heed have been given to stability and convergence schemes. The MATLAB R2015a and Studio Developer FORTRAN 6.6a have been employed for numerical simulation of the schematic model equations. To quest steady-state, an experiment is performed on time simultaneously an experiment on mesh size is ascertained to assure a suitable mesh space. Also, a code verification test has been performed. In addition to that, the computational depictions and discussions have been undertaken on the impacts of significant parametric values for the velocity field, induced magnetic field, temperature, and concentration along with current density and shear stress. The reported results for the present numerical schemes have been compared with published papers in tables and plots. The suction parameter tends to pull down the quantitative measurement of velocity, temperature, and concentration. The induced magnetic field is affected decreasingly by the rising estimation of the magnetic parameter.
30 December 2018 in Modelling, Measurement and Control B
Fluid flow analysis through a bend pipe is extensively conducted in practical and cell separation operations. It is observed that flow behaviors in the bend pipe are influenced by some parameters such as curvature, aspect ratio, etc. As a result, various phenomena, steady solution branches, unsteady solutions, energy transfer are changed. In this paper, the acts of flows are performed together for fixed curvature, δ = 0.2, and Prandtl number, Pr = 7.0 (water). Here, for a wide variety of Dean numbers (100 ≤ Dn ≤ 1000) and three fixed Grashof numbers, Gr = 100, 500, and 1000; time-independent solutions with linear stabilities are investigated first where only the first steady branch exhibits linear stability out of two steady solution branches obtained. Then, different flow transitions between the required range of Dean numbers (Dn) and several Grashof numbers (Gr) are investigated using time-dependent solutions. Power spectrum density (PSD) is further revealed in order to gain a deeper understanding of periodic and multi-periodic flows. Flow velocity contours including axial flow (AF) and secondary flow (SF) and their temperature profiles (TP) are also exposed. The SFs reveal that two- to four-vortex flows are produced due to the turning of steady branch and the flow instabilities. Furthermore, the energy transfer between the cooled and heated sidewalls of the pipe is calculated. Finally, a link between centrifugal and body force with the energy transfer has been shown in this research which reveals that the fluid has merged that certainly rises the overall energy transfer.