Biosample encapsulation is a critical step in a wide range of biomedical and bioengineering applications. Aqueous two-phase system (ATPS) droplets have been recently introduced and showed a great promise to the biological separation and encapsulation due to their excellent biocompatibility. This study shows for the first time the passive generation of salt-based ATPS microdroplets and their biocompatibility test. We used two ATPS including polymer/polymer (polyethylene glycol (PEG)/dextran (DEX)) and polymer/salt (PEG/Magnesium sulfate) for droplet generation in a flow-focusing geometry. Droplet morphologies and monodispersity in both systems are studied. The PEG/salt system showed an excellent capability of uniform droplet formation with a wide range of sizes (20–60 μm) which makes it a suitable candidate for encapsulation of biological samples. Therefore, we examined the potential application of the PEG/salt system for encapsulating human umbilical vein endothelial cells (HUVECs). A cell viability test was conducted on MgSO₄ solutions at various concentrations and our results showed an adequate cell survival. The findings of this research suggest that the polymer/salt ATPS could be a biocompatible all-aqueous platform for cell encapsulation.

Hydrogen storage is a promising technology for storage of renewable energy resources. Despite its high energy density potential, the development of hydrogen storage has been impeded, mainly due to its significant cost. Although its cost is governed mainly by electrical energy expense, especially for hydrogen produced with alkaline water electrolysis, it is also driven by the value of the cell tension. The most common means of electrolyzer improvement is the use of an electrocatalyst, which reduces the energy required for electrochemical reaction to take place. Another efficient means of electrolyzer improvement is to use the Computational Fluid Dynamics (CFD)-assisted design that allows the comprehension of the phenomena occurring in the electrolyzer and also the improvement in the electrolyzer’s efficiency. The designed two-phase hydrodynamics model of this study has been compared with the experimental results of velocity profiles measured using Laser Doppler Velocimetry (LDV) method. The simulated results were in good agreement with the experimental data in the literature. Under the good fit with experimental values, it is efficient to introduce a new physical bubble transfer phenomenon description called “bubble diffusion”.

Modifying reservoir surface wetting properties is an appealing topic to the upstream oil and gas industry for enhancing hydrocarbon recovery as the shifting of reservoir rock surface wetting from oil-wet to water-wet has enhanced the oil recovery by as much as 70–80%. In the last few decades, research has been conducted on core flooding experiments to reveal wettability alteration mechanisms associated with macroscopic fluid flow in reservoirs. In recent years, the microscopic wetting state and fluid distribution behavior have been studied using micromodel experimental techniques to promote the fundamental mechanisms of wettability alteration. To provide the concurrent knowledge and technology development, this comprehensive review focuses on micromodel investigations for wettability alteration in chemical-enhanced oil recovery using surfactants and/or nanofluids that reveal microscopic behaviors on the wetting state, fluid distribution, and their associated mechanisms. This comprehensive review focuses on micromodel investigations for wettability alteration in chemical-enhanced oil recovery using surfactants and/or nanofluids that reveal microscopic behaviors on the wetting state, fluid distribution, and their associated mechanisms. Wettability characteristics and measurement techniques are thoroughly assessed to understand the critical role of wettability for enhanced oil recovery. With the microfluidic-based studies, the effect of relative permeability along with the pore network and wetting order on oil recovery have been discussed. Later on, the new development in phase diagram related to viscus fingering and capillary fingering regime have been reviewed via various micromodels. Then, the wettability alteration mechanisms and governing parameters by surfactant and nanoparticles are summarized. Additionally, recent micromodel experiments on surfactants and nanofluid-assisted enhanced oil recovery are reviewed and listed, along with their fabrication methods.