This work presents a study on the electrical conductivity of composites made up of polypyrrole particles in a polymethylmethacrylate matrix. The conductivity was studied as a function of frequency in the range 40 Hz to 100 kHz, at room temperature. McLachlan and Mamunya models were used to fit the data and compute the response in a large range of frequency. These models show satisfactory results with experimental electrical conductivities by considering the parameters of these models as adjustable parameters. Nevertheless, the exponent parameters obtained by the simulation are not universal.
The morphology, crystallinity, and electrical conductivity (σ′ and σ″) as a function of frequency of polypropylene (PP) melt-extruded with different amounts of as-grown carbon nanofibers (CNFs) from 0 to 1.4 vol. % are examined. The PP/CNF composites present CNF aggregates randomly distributed within the PP and an insulator–conductor transition at CNF contents near 0.9 vol. %. The degree of crystallinity of PP/CNF composites with loadings of 1.4 vol. % increases ∼15% with respect to the neat PP (∼34%), with σ´ ∼ 8.6 × 10−5 S m−1 (σ″ ∼ 8.3 × 10−4 S m−1) at 2 MHz. In addition, the values of the electrical conductivity σint´ ∼2.9 × 10−6 S m−1 (σint″∼3.7 × 10−4 S m−1) at 2 MHz, as a result of the interphase (ϕint ∼0.05 vol. %) of the 1.4 vol. % PP/CNF composites, are estimated by the use of a modified generalized effective medium model (GEM). The analysis gathered in here indicates that the interphase between the polymer and the conducting particle may have a quantifiable effect on the electrical properties of carbon-based polymer composites, and this fact should not be neglected in the production of conducting polymer composites (CPCs) with enhanced electrical properties.
In this work, pyrolytically stripped carbon nanofiber (CNF) polypropylene (PP) composites were synthesized following a scalable melt-mixing method, and the effects of CNF weight concentrations on the electrical conductivity, dielectric permittivity, electrical modulus and electrical impedance of PP/CNF composites were studied. Quite unexpectedly, the electrical conductivity of PP/CNF composites improved only slightly as the incorporation of CNFs was raised, yielding a maximum of ~10−10 S m−1 for PP/CNF 5 wt. % composites. The increase corresponded to a gradual improvement of the dielectric constant up to a maximum of ~9 for PP/CNF 5 wt. % composites at 1 MHz, which was attributed to the raise of interface polarization effect. Moreover, the Cole–Cole model was used to analyze the effects of CNF concentrations on the dielectric relaxation of PP/CNF composites, from which was deduced that the incorporation of CNFs increases their dielectric strength and relaxation times. The analysis gathered here aims to provide a better insight into the enhanced dielectric properties observed in low-conducting polymer composites filled with CNFs.
Thermal properties of polypyrrole/polymethylmethacrylate (PPy/PMMA) composites were analyzed by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). A decrease in the glass transition temperatures with PPy concentration reveals the increase of segmental motion. The dielectric properties of these composites were studied for several weight concentrations of PPy in the frequency range between 500 Hz and 0.2 MHz, over the temperature range 23–110°C. Jonscher's phenomenological model has been used for modeling the dielectric response of the composite materials. This study shows that the results obtained for the dielectric response are in good agreement with the results of TGA and DSC measurements.