Geopolymers can be treated as an environmentally friendly alternative for concrete and enables utilization of various wastes. This paper focuses on the possibility of application of discarded cathode ray tube (CRT) glass inside a metakaolin-based geopolymer in the form of an aggregate, providing an ecological method of recycling of this hazardous material. The main goal of this paper was to develop an optimal composition of a new geopolymer and to describe its behavior under varying curing conditions. A geopolymer made of different mixtures was subjected to flexural and compressive strength tests. The density, mass loss, temperature changes, and metals leaching were determined as well. The results demonstrated that neither the content of CRT glass nor the curing regime has a significant influence on the mechanical behavior. However, the strength of the geopolymer containing 50% CRT glass by mass increased with time in contrast to a geopolymer with a higher CRT glass content. The development of temperature inside the mixture was dependent on the amount of metakaolin. The concentration of toxic metals in an aqueous extract decreased considerably after the encapsulation of CRT glass inside the geopolymer. The presented results indicate that discarded CRT glass can be considered an aggregate for a metakaolin-based geopolymer. The new material shows high strength and makes the CRT glass safe for the environment.
This paper presents novel research on a fluidized bed combustion (FBC) fly ash-based geopolymer as a contribution to the problem of FBC fly ash disposal, and a proposal for a new geopolymer composition—an environmentally friendly material that is possible to use in construction. Geopolymer samples of various composition (containing FBC fly ash as the main raw material, metakaolin and CRT glass as additional components, and sodium silicate and sodium hydroxide as activators) were subjected to flexural and compressive strength tests. An investigation on the effect of the demolding time was carried out on one selected mixture. The test showed that both the composition and the demolding time have a decisive influence on the basic mechanical properties. A mixture containing FBC fly ash to metakaolin in a mass ratio of 3:1, removed from the mold after 14 days, was found to be the best in terms of the mechanical parameters expected from a material that could be used in construction, e.g., for the production of precast elements. According to the results obtained, FBC fly ash is a promising and environmentally friendly raw material for the production of geopolymer, with good mechanical properties and low density. Moreover, a high compressive strength can be obtained by curing the geopolymer at ambient temperature.
Cathode Ray Tube (CRT) glass belongs to the group of wastes which are hard to be recycled due to their toxic metals content. Geopolymers are relatively new environmentally friendly materials which allow for the use of different types of wastes within their matrix. The following paper combines both issues and presents a new geopolymer mixture containing discarded CRT glass as a replacement for an aggregate. The main goal of the paper is to describe the basic mechanical behavior of the new type of metakaolin-based geopolymer and to discuss different factors influencing it. After the preliminary research, the mixture containing 50% of CRT glass was chosen for further tests. However, according to results, CRT glass content has no evident influence on flexural or compressive strength. Summarizing the second part of the research, it was decided that the following parameters are optimal from the mechanical, economic and environmental points of view: metakaolin to CRT glass ratio 1:1 (by mass), CRT glass of size up to 4 mm, curing at the room temperature, sodium hydroxide concentration 10 mol/L. According to the authors, the presented geopolymer is a promising building material. Further tests shall be done to describe new material more precisely.