Paper and board show many advantages as packaging materials, but the current technologies employed to obtain adequate barrier properties for food packaging use synthetic polymers coating and lamination with plastic or aluminium foils—treatments which have a negative impact on packaging sustainability, poor recyclability and lack of biodegradability. Recently, biopolymers have attracted increased attention as paper coatings, which can provide new combinations in composite formulas to meet the requirements of food packaging. The number of studies on biopolymers for developing barrier properties of packaging materials is increasing, but only a few of them are addressed to food packaging paper. Polysaccharides are viewed as the main candidates to substitute oil-based polymers in food paper coating, due to their film forming ability, good affinity for paper substrate, appropriate barrier to gases and aroma, and positive effect on mechanical strength. Additionally, these biopolymers are biodegradable, non-toxic and act as a matrix for incorporation additives with specific functionalities for coated paper (i.e., active-antimicrobial properties). This paper presents an overview on the availability and application of polysaccharides from vegetal and marine biomass in coatings for foods packaging paper. The extraction methods, chemical modification and combination routes of these biopolymers in coatings for paper packaging are discussed.
Wet foam can be used as a carrier in the manufacturing of lightweight materials based on natural and man-made fibers and specific additives. Using a foam forming method and cellulose fibers, it is possible to produce the porous materials with large area of end-using such as protective and cushioning packaging, filtering, hydroponic, thermal and sound absorption insulation, or other building materials. In comparison with the water-forming used for conventional paper products, foam-forming method provides many advantages. In particular, since fibers inside the foam are mostly trapped between the foam bubbles, the formed materials have an excellent homogeneity. This allows for using long fibers and a high consistency in head box without significant fiber flocking. As result, important savings in water and energy consumptions for dewatering and drying of the foam formed materials are obtained. In cushioning packaging, foam-formed cellulose materials have their specific advantages comparing to other biodegradable packaging (corrugated board, molded pulp) and can be a sustainable alternative to existing synthetic foams (i.e., expanded polystyrene or polyurethane foams). This review discusses the technical parameters to be controlled during foam forming of cellulose materials to ensure their performances as cushioning and protective packaging. The focus was on the identification of practical solutions to compensate the strength decreasing caused by reduced density and low resistance to water of foam formed cellulose materials.
Xylan hemicelluloses are considered the second most abundant class of polysaccharides after cellulose which has good natural barrier properties necessary for foods packaging papers and films. Xylan exists today as a natural polymer, but its utilisation in packaging applications is limited and not sufficiently analysed. In this study, the performances of hardwood xylan hemicellulose in forming uniform films and as biopolymer for paper coatings were analysed. The xylan-coated paper and film samples were tested regarding their water, air, and water vapour permeability, water solubility, mechanical strength, and antimicrobial activity against pathogenic bacteria. Structural analyses of xylan hemicelluloses emphasised a high number of hydroxyl groups with high water affinity. This affects the functional properties of xylan-coated papers but can facilitate the chemical modification of xylan in order to improve their hydrophobic properties and extend their areas of application. The obtained results unveil a promising starting point for using this material in food packaging applications as a competitive and sustainable alternative to petroleum-based polymers.
In the last time, the use of natural additives that are biocompatible, are biodegradable, have low toxicity and are from renewable resources attracted attention of many researchers due to their high ability to retain different pollutants from wastewaters. In this context, there are many research studies that highlight the biosorbent ability of chitosan and their composites for the pollutants from wastewaters such as heavy metal ions, organochloride pesticides, suspended solids, turbidity, organic oxidised substances, fatty and oil impurities or textile wastewater dyes. Furthermore, the increase of adsorption ability of chitosan by chemical modifications leading to the formation of chitosan derivatives, grafting chitosan and chitosan composites gained much attention, being extensively studied and widely reported in the literature. In this chapter the research studies regarding the chitosan application in wastewater treatments as well as the preliminary results on its chemical modification to obtain and utilisation of zeolite-chitosan composites in adsorption of organic pollutants from industrial wastewaters are presented.
Use of foam-formed cellulose composite materials is a viable alternative that provides potential savings in terms of raw materials, energy and water compared with conventional methods for obtaining the fibrous composites. This new innovative manufacturing method leads to obtaining porous materials with low density and low environmental impact, which could replace the petroleum-based products in different industrial application fields like sound control. In this paper is presented a methodology for producing low-density cellulose composite materials in foam media. In this methodology a surfactant is mixed with cellulose fibres (from virgin pulp and recovered papers) at high shear velocity (2000 r/min) to entrain air, dewatered on Buchner funnel under low vacuum and air dried in non-restrained conditions. The obtained composite materials have been tested by sound insulation parameters (sound transmission loss and absorption coefficients) using two experimental impedance tubes with four-microphone configuration and anechoic termination. Three samples of foam-formed cellulose composites and one water-formed composite sample were obtained. Their sound insulation performances were compared with two different commercially available petroleum-based materials currently used in sound insulation applications (i.e. expanded/extruded polystyrene). The experimental results show comparable performances between foam-formed cellulose composites and polystyrene-based samples, but in terms of the environmental impact, these materials can be an appropriate green alternative which can cut the costs of recycling process.
Lignocelluloses residues from the post-harvest crop are receiving great scientific attention nowadays. Generally, the composite materials based on lignocelluloses waste present low density and weight, and better insulation properties compared with those petroleum-based. This study presents the results of experimental investigations regarding soundproofing capabilities for a composite material based on expanded perlite (EP) and natural polymers matrix (starch) reinforced with rapeseed stalks waste. The preparation of light-weight samples of composites was performed at room temperature through a mechanical mixing process of EP with starch polymers and rapeseed residues until optimum moisture content composition was obtained. Rapeseed stalks long fibers were avoided through the preliminary dry grinding procedure, and the composite was air-dried at room temperature for 48 h. Four samples of composites with different ratio of EP and rapeseed waste were considered. The evaluation of sample sound insulation characteristics was performed using the transfer-matrix method based on a four-microphone acoustic impedance tube. The paper concludes that the proposed composite provides comparative sound insulation capabilities to actual materials, with few particular aspects presented within the paper. Thus, these new materials are promising as a viable alternative to the actual large-scale utilization solutions in soundproofing applications.