We demonstrate an L-band passively mode-locked erbium-doped fiber laser emitting at 1599.43 nm wavelength at a pulse train of 5.68 MHz. The microfiber reduced graphene oxide composite behaves as a saturable absorber that was fabricated using in-situ wet chemical and dip-coating methods. During operation, a single-pulse soliton was observed at a mode-locking threshold of 40 mW. This is a few times lower than most of the previous assessments in the same class of wavelength band and graphene saturable absorbers. The pulse duration was 568 fs with a maximum average output power of 6.75 mW. In addition, the superiority of this simple fabrication method facilitates its potential of mass production for applications in ultrafast photonics industries.
The effect of NaOH solution on the formation of nanoparticles has been the subject of ongoing debate in selenium-based material research. In this project, the robust correlation between the mechanistic growth of zinc selenide/graphene oxide (ZnSe/GO) composite and the concentration of NaOH are elucidated. The ZnSe/GO composite was synthesized via microwave-assisted hydrothermal method and the concentrations of NaOH are controlled at 2 M, 3 M, 4 M, 5 M and 6 M. The XRD spectra show that the crystal phases of the samples exhibited a 100% purity of ZnSe when the concentration of sodium hydroxide (NaOH) was set at 4 M. The further increase of NaOH concentration leads to the formation of impurities. This result reflects the essential role of hydroxyl ions in modifying the purity state of ZnSe/GO composite. The optical band gap energy of ZnSe/GO composite also decreased from 2.68 eV to 2.64 eV when the concentration of NaOH increased from 2 M to 4 M. Therefore, it can be concluded that the optimum concentration of NaOH used in synthesizing ZnSe/GO composite is 4 M. This project provides an alternative green method in the formation of a high purity ZnSe/GO composite.