Electricity has become an indispensable source of energy, and power lines play a crucial role in the functioning of modern societies. It is essential to inspect power lines promptly and precisely in order to ensure the safe and secure delivery of electricity. In steep and mountainous terrain, traditional surveying methods cannot inspect power lines precisely due to their nature. Remote sensing platforms, such as satellite and aerial images, thermal images, and light detection and ranging (LiDAR) points, were utilised for the detection and inspection of power lines. Nevertheless, with the advancements of remote sensing technologies, in recent years, LiDAR surveying has been favoured for power line corridor (PLC) inspection due to active and weather-independent nature of laser scanning. Laser ranging data and the precise location of the LiDAR can be used to generate a three-dimensional (3D) image of the PLC. The resulting 3D point cloud enables accurate extraction of power lines and measurement of their distances from the forest below. In the literature, there have been many proposals for power line extraction and reconstruction for PLC modelling. This article examines the pros and cons of each domain method, providing researchers involved in three-dimensional modelling of power lines using innovative LiDAR scanning systems with useful guidelines. To achieve these objectives, research papers were analysed, focusing primarily on geoscience-related journals and conferences for the extraction and reconstruction of power lines. There has been a growing interest in examining the extraction and reconstruction of power line spans with single and multi-conductor configurations using different image and point-based techniques. Our study provides a comprehensive overview of the methodologies offered by various approaches using laser scanning data from the perspective of power line extraction applications, as well as to discuss the benefits and drawbacks of each approach. The comparison revealed that, despite the tremendous potential of aerial and mobile laser scanning systems, human intervention and post-processing actions are still required to achieve the desired results. In addition, the majority of the methods have been evaluated on the small datasets, and very few methods have been focused on multi-conductor extraction and reconstruction for power lines modelling. These barriers hinder the automated extraction and reconstruction of power line using LiDAR data and point to unexplored areas for further research and serve as useful guidelines for future research directions. Several promising directions for future LiDAR experiments using deep learning methods are outlined in the hope that they will pave the way for applications of PLC modelling and assessment at a finer scale and on a larger scale.
Overhead high-voltage conductors are the chief components of power lines and their safety has a strong influence on social and daily life. In the recent decade, the airborne laser scanning (ALS) technique has been widely used to capture the three-dimensional (3D) information of power lines and surrounding objects. Most of the existing methods focused on extraction of single conductors or extracted all conductors as one object class by applying machine learning techniques. Nevertheless, power line corridors (PLCs) are built with multi-loop, multi-phase structures (bundle conductors) and exist in intricate environments (e.g., mountains and forests), and thus raise challenges to process ALS data for extraction of individual conductors. This paper proposes an automated method to extract individual subconductors in bundles from complex structure of PLCs using a combined image- and point-based approach. First, the input point cloud data are grouped into 3D voxel grid and PL points and separated from pylon and tree points using the fact that pylons and trees are vertical objects while power lines are non-vertical objects. These pylons are further separated from trees by employing a statistical analysis technique and used to extract span points between two consecutive pylons; then, by using the distribution properties of power lines in each individual span, the bundles located at different height levels are extracted using image-based processing; finally, subconductors in each bundle are detected and extracted by introducing a window that slides over the individual bundle. The orthogonal plane transformation and recursive clustering procedures are exploited in each window position and a point-based processing is conducted iteratively for extraction of complete individual subconductors in each bundle. The feasibility and validity of the proposed method are verified on two Australian sites having bundle conductors in high-voltage transmission lines. Our experiments show that the proposed method achieves a reliable result by extracting the real structure of bundle conductors in power lines with correctness of 100% and 90% in the two test sites, respectively.
23 September 2019 in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Despite the large quantity of researches and publications achieved during the last three decades about 3D building modelling by using Lidar data, the question of inner roof plane boundaries modelling needs to be more extracted in detail. This paper focuses on detection and 2D modelling of building inner roof plane boundaries. This operation presents an imperative junction between roof planes detection and 3D building model generation. Therefore, it presents key procedure in data driven approaches. For achieving this purpose, roof boundaries are classified in four categories: outer building boundaries, inner roof plane boundaries, roof details (chimneys and windows) boundaries and boundaries related to non-detectable roof details. This paper concentrates on detection and modelling of inner roof plane boundaries and roof details (chimneys and windows) boundaries. Moreover, it details the modelling procedures step by step that is envisaged rarely in the literature. The proposed approach starts by analysing the adjacency relationship between roof planes. Then, the inner roof plane boundaries are detected. Finally, the junction relationships between boundaries are analysed before detecting the roof vertices. Once the 2D roof model is calculated, the visual deformations in addition to modelling accuracy are discussed.
12 December 2023 in IEEE Transactions on Geoscience and Remote Sensing
Transmission line safety is vital to the nation’s economy and daily lives. In recent decades, most electric utilities have relied on light detection and ranging (LiDAR) technology to inspect transmission line corridors. However, occlusion and point density gaps in scanned LiDAR data will affect power line extraction. Moreover, high-voltage transmission line (HVTL) corridors in complicated locations with multiple loops pose significant challenges. The detailed modeling of power lines is a prerequisite for detecting potential risks. Thus, this study introduces a fourfold strategy to extract and correctly reconstruct huge gaps in HVTL conductor bundles. In the first step, the power lines are retrieved as span points using the 3-D voxel grid. The second step generates bundle masks by splitting span points into several segments. A bipartite graph connects bundle segments with wide gaps utilizing bundle location information from these masks. Third, bundles are segmented again to form conductor masks for sub-conductor extraction utilizing image-based algorithms and probability. Finally, the mathematical model reconstructs the retrieved power lines as sub-conductors. The proposed technique is tested on 58 spans with different power line configurations from two low-point-density datasets with a few constant parameters. The test results demonstrate the resilience of the proposed method in effectively repairing large gaps in bundles and sub-conductors. The sub-conductors are retrieved with 90% accuracy. The suggested method robustly reconstructs sub-conductors with a fitting residual error of less than 0.07 m.