International audience+Inexpensive and easily available Moroccan natural clays were investigated for the removal availability of textile dyes from aqueous solution. For this purpose, the adsorption of methylene blue (MB) as reference molecule, malachite green (MG) representative of cationic dyes and methyl orange (MO) representative of anionic dyes, was studied in batch mode under various parameters. The clays were characterized by means of XRD, cationic exchange capacity and BET surface area analysis. The experimental results show that, the adsorption was pH dependent with a high adsorption capacity of MB and MG in basic range and high adsorption of MO in acidic range. The pseudo-second-order kinetic model provided the best fit to the experimental data for the adsorption of MB and MG by the clays. However, the adsorption of MO was more suitable to be controlled by an intra-particle diffusion mechanism. The equilibrium adsorption data were analyzed by Langmuir, Freundlich and Dubinin-Ralushkevich isotherm models. The adsorption process was found to be exothermic in nature in the case of MB and MO. However, the adsorption of MG was endothermic.
1 January 2017 in Journal of Taibah University for Science
In this work, Zn–Al layered double hydroxides intercalated with carbonate, nitrate, chloride and sulphate ions were synthesised via a co-precipitation method at a constant solution pH. The as-synthesised samples were characterised by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and simultaneous thermogravimetric/differential thermal analysis (TGA-DTA). The XRD patterns showed that Zn-Al-SO4 had the greatest interlayer spacing, followed by Zn-Al-Cl, Zn-Al-NO3 and Zn-Al-CO3. The FTIR spectra clearly confirmed the presence of intercalated anions in the structure of the LDHs. Batch experiments for methyl orange (MO) adsorption onto synthesised samples were investigated under various conditions such as contact time, initial dye concentration and solution pH. The experimental results show that pH is the most influencing factor. The effective pH range for the MO removal was found to be 3.5–4.5. The kinetics data can be described accurately by a pseudo-second-order kinetic model instead of a pseudo-first-order model. The equilibrium data were analysed using the Langmuir, Freundlich and Dubinin–Radushkevich models. The results showed that the Langmuir and Dubinin–Radushkevich isotherm models fit well to the experimental data. The Zn-Al-LDH samples exhibited exceptional Langmuir maximum adsorption capacities of 2758, 2455, 2270 and 1684 mg/g for Zn-Al-SO4, Zn-Al-Cl, Zn-Al-NO3 and Zn-Al-CO3, respectively
1 June 2021 in Journal of Environmental Management