Omar Al-Dossary

Prof. Dr. Omar Al-Dossary

Department of Physics and Astronomy, College of Science, King Saud University, PO Box 2455, Riyadh 11451, Saudi Arabia
orcid

Research Focus & Metrics

Academic Career Length

35Years (1992-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 December 2014 in Nano-Micro Letters
Verified
Journal Article
Open access
PDF file
RKRajesh Kumar
Rajesh Kumar
OAOmar Al-Dossary
Omar Al-Dossary
GKGirish Kumar
Girish Kumar
AUAhmad Umar
Ahmad Umar
Because of the interesting and multifunctional properties, recently, ZnO nanostructures are considered as excellent material for fabrication of highly sensitive and selective gas sensors. Thus, ZnO nanomaterials are widely used to fabricate efficient gas sensors for the detection of various hazardous and toxic gases. The presented review article is focusing on the recent developments of NO2 gas sensors based on ZnO nanomaterials. The review presents the general introduction of some metal oxide nanomaterials for gas sensing application and finally focusing on the structure of ZnO and its gas sensing mechanisms. Basic gas sensing characteristics such as gas response, response time, recovery time, selectivity, detection limit, stability and recyclability, etc are also discussed in this article. Further, the utilization of various ZnO nanomaterials such as nanorods, nanowires, nano-micro flowers, quantum dots, thin films and nanosheets, etc for the fabrication of NO2 gas sensors are also presented. Moreover, various factors such as NO2 concentrations, annealing temperature, ZnO morphologies and particle sizes, relative humidity, operating temperatures which are affecting the NO2 gas sensing properties are discussed in this review. Finally, the review article is concluded and future directions are presented.

14 April 2021 in Magnetochemistry
Verified
Journal Article
Open access
PDF file
MHMuhammad Hadi
Muhammad Hadi
Khalid Mujasam BatooKhalid Mujasam Batoo
Khalid Mujasam Batoo
ACAnkush Chauhan
Ankush Chauhan
OAOmar Al-Dossary
Omar Al-Dossary
Ritesh VermaRitesh Verma
Ritesh Verma
Yujie YangYujie Yang
Yujie Yang
Herein, we report the synthesis of nanoparticles and doping of Cu-doped Co–Zn ferrites using the auto-combustion sol–gel synthesis technique. X-ray diffraction studies confirmed the single-phase structure of the samples with space group Fd3m and crystallite size in the range of 20.57–32.69 nm. Transmission electron microscopy micrographs and selected area electron diffraction patterns confirmed the polycrystalline nature of the ferrite nanoparticles. Energy-dispersive X-ray spectroscopy revealed the elemental composition in the absence of any impurity phases. Fourier-transform infrared studies showed the presence of two prominent peaks at approximately 420 cm−1 and 580 cm−1, showing metal–oxygen stretching and the formation of ferrite composite. X-ray photoelectron spectroscopy was employed to determine the oxidation states of Fe, Co, Zn, and Cu and O vacancies based on which cationic distributions at tetrahedral and octahedral sites are proposed. Dielectric spectroscopy showed that the samples exhibit Maxwell–Wagner interfacial polarization, which decreases as the frequency of the applied field increases. The dielectric loss of the samples was less than 1, confirming that the samples can be used for the fabrication of multilayer inductor chips. The ac conductivity of the samples increased with increasing doping and with frequency, and this has been explained by the hopping model. The hysteresis loops revealed that coercivity decreases slightly with doping, while the highest saturation magnetization of 55.61 emu/g was obtained when x = 0.1. The magnetic anisotropic constant was found to be less than 0.5, which suggests that the samples exhibit uniaxial anisotropy rather than cubic anisotropy. The squareness ratio indicates that the samples are useful in high-frequency applications.

7 January 2016 in Physical Review A
Verified
Journal Article
Closed access
PDF file
MŁMateusz Łącki
Mateusz Łącki
HPHannes Pichler
Hannes Pichler
ASAntoine Sterdyniak
Antoine Sterdyniak
ALAndreas Lyras
Andreas Lyras
VLVassilis E. Lembessis
Vassilis E. Lembessis
PZPeter Zoller
Peter Zoller
We propose and study various realizations of a Hofstadter-Hubbard model on a cylinder geometry with fermionic cold atoms in optical lattices. The cylindrical optical lattice is created by copropagating Laguerre-Gauss beams, i.e., light beams carrying orbital angular momentum. By strong focusing of the light beams we create a real-space optical lattice in the form of rings, which are offset in energy. A second set of Laguerre-Gauss beams then induces a Raman-hopping between these rings, imprinting phases corresponding to a synthetic magnetic field (artificial gauge field). In addition, by rotating the lattice potential, we achieve a slowly varying flux through the hole of the cylinder, which allows us to probe the Hall response of the system as a realization of Laughlin's thought experiment. We study how in the presence of interactions fractional quantum Hall physics could be observed in this setup.

16 March 2023 in Molecules
Verified
Journal Article
Open access
PDF file
FAFeride Akman
Feride Akman
ADAzize Demirpolat
Azize Demirpolat
Aleksandr KazachenkoAleksandr Kazachenko
Aleksandr Kazachenko
Aleksandr KazachenkoAleksandr Kazachenko
Aleksandr Kazachenko
Noureddine ISSAOUINoureddine ISSAOUI
Noureddine ISSAOUI
OAOmar Al-Dossary
Omar Al-Dossary
Essential oils are volatile oil-like liquids with a characteristic strong smell and taste. They are formed in plants and are then extracted. Essential oils have extremely strong physiological and pharmacological properties, which are used in the medicine, cosmetics, and food industries. In this study, the molecules caryophyllene oxide, β-pinene, 1,8-cineol, α-cubebene, and β-caryophyllene, which are the molecules with the highest contents in the essential oil of the plant mentioned in the title, were selected and theoretical calculations describing their interactions with water were performed. Because oil–water mixtures are very important in biology and industry and are ubiquitous in nature, quantum chemical calculations for binary mixtures of water with caryophyllene oxide, β-pinene, 1,8-cineol, α-cubebene, and β-caryophyllene were performed using the density functional theory (DFT)/B3LYP method with a basis of 6–31 G (d, p). Molecular structures, HOMO–LUMO energies, electronic properties, reactivity (ELF, LOL, and Fukui), and NCI-RDG and molecular electrostatic potential (MEP) on surfaces of the main components of Phlomis bruguieri Desf. essential oil were calculated and described.

1 September 2016 in Materials & Design
Verified
Journal Article
Closed access
AUAhmad Umar
Ahmad Umar
JLJong-Heun Lee
Jong-Heun Lee
RKRajesh Kumar
Rajesh Kumar
OAOmar Al-Dossary
Omar Al-Dossary
AIAhmed Ibrahim
Ahmed Ibrahim
SBS. Baskoutas
S. Baskoutas

1 January 2015 in Materials Express
Verified
Journal Article
Closed access
RKRajesh Kumar
Rajesh Kumar
GKGirish Kumar
Girish Kumar
OAOmar Al-Dossary
Omar Al-Dossary
AUAhmad Umar
Ahmad Umar