Since artificial intelligence (AI) was introduced into engineering fields, it has made many breakthroughs. Machine learning (ML) algorithms have been very commonly used in structural health monitoring (SHM) systems in the last decade. In this study, a vibration-based early stage of bolt loosening detection and identification technique is proposed using ML algorithms, for a motor fastened with four bolts (M8 × 1.5) to a stationary support. First, several cases with fastened and loosened bolts were established, and the motor was operated in three different types of working condition (800 rpm, 1000 rpm, and 1200 rpm), in order to obtain enough vibration data. Second, for feature extraction of the dataset, the short-time Fourier transform (STFT) method was performed. Third, different types of classifier of ML were trained, and a new test dataset was applied to evaluate the performance of the classifiers. Finally, the classifier with the greatest accuracy was identified. The test results showed that the capability of the classifier was satisfactory for detecting bolt loosening and identifying which bolt or bolts started to lose their preload in each working condition. The identified classifier will be implemented for online monitoring of the early stage of bolt loosening of a multi-bolt structure in future works.
A hydraulic piston pump is an essential component of a hydraulic transmission system and is extensively used in contemporary industrial settings. Therefore, fault diagnosis of piston pumps is a crucial topic in the engineering field. The convolutional neural network (CNN) is currently the most popular deep neural network model and has been successfully employed for fault detection and other tasks. The design and hyperparameter settings of CNNs significantly affect the overall diagnosis performance. In this study, a genetic method is proposed that can quickly investigate a specific set of potentially viable one-dimensional CNN (1D-CNN) architectures while also optimizing their hyperparameters for a fault detection task of an axial hydraulic piston pump. The proposed model is automatically designed based on a direct connect 1D-CNN block, which is another contribution of this study. The proposed method is evaluated on the raw sound signal dataset of an axial hydraulic piston pump without any signal pre-processing techniques. The experimental results demonstrate that the proposed method outperforms several well-known deep learning (DL) models in terms of fault diagnosis performance. Additionally, the suggested method uses significantly less computational power to determine the best 1D-CNN structures than most peer rivals.
Indoor hydroponic greenhouses are becoming increasingly popular for sustainable food production. On the other hand, precise control of the climate conditions inside these greenhouses is crucial for the success of the crops. Time series deep learning models are adequate for climate predictions in indoor hydroponic greenhouses, but a comparative analysis of these models at different time intervals is needed. This study evaluated the performance of three commonly used deep learning models for climate prediction in an indoor hydroponic greenhouse: Deep Neural Network, Long–Short Term Memory (LSTM), and 1D Convolutional Neural Network. The performance of these models was compared at four time intervals (1, 5, 10, and 15 min) using a dataset collected over a week at one-minute intervals. The experimental results showed that all three models perform well in predicting the temperature, humidity, and CO2 concentration in a greenhouse. The performance of the models varied at different time intervals, with the LSTM model outperforming the other models at shorter time intervals. Increasing the time interval from 1 to 15 min adversely affected the performance of the models. This study provides insights into the effectiveness of time series deep learning models for climate predictions in indoor hydroponic greenhouses. The results highlight the importance of choosing the appropriate time interval for accurate predictions. These findings can guide the design of intelligent control systems for indoor hydroponic greenhouses and contribute to the advancement of sustainable food production.
12 August 2021 in Advances in Mechanical Engineering
The most commonly used part in engineering fields is threaded fasteners. There are a lot of advantages of fasteners. One of them is that they can be easily disassembled and reused, but a bolted joint can loosen easily when a transversal load is applied. The clamp load of a bolted joint can also loosen slowly when subjected to repeated temperature changes. This paper presents an experimental investigation of the self-loosening of bolted joints under cyclical temperature variation. Experiments are carried out under several cyclical temperature changes with different bolt preloads. Rectangular threaded bolted joints with M12 × 1.75 bolts and nuts are tested in a specially designed testing apparatus. Material of bolt, nut, and plates is a stainless steel. The experimental results show that the high initial bolt preload may prevent the joint from self-loosening and the bolted joint has loosened significantly in the first cycle of temperature changes. From this investigation, the loosening of the bolted joint can be considered as a first stage self-loosening.
Three-dimensional printing can bring huge advantages when fabricating difficult structures and components in industry. This technology is also used commonly for printing threaded fasteners in the engineering field. The main disadvantage of threated fasteners is self-loosening. In this study, an International Organization for Standardization (ISO) standard M12 × 1.75 bolt and nut were printed by using a 3D printer and three types of 3D printing materials: acrylonitrile butadiene styrene (ABS-2), poly lactic acid (PLA), and glass. Following this, a test system for self-loosening of the 3D-printed bolts under cyclical temperature variations was constructed, and self-loosening of the bolted joints was observed by measuring the bolt preload using a load cell and the rotation displacement of the nut using a dial indicator according to temperature changes (from 10 °C up to 40 °C and 80 °C). The experimental results show that the ABS-2 bolt has good performance in terms of self-loosening phenomena under cyclical temperature changes, while the PLA bolt has poor performance in low temperature changes. The glass bolt indicated the lowest performance in high temperature changes.
This study introduces a deep learning (DL)-based optimal condition monitoring and control system tailored to indoor smart greenhouses, with a novel focus on maintaining symmetry—defined as a dynamic equilibrium among temperature, humidity, and CO2 levels—critical in plant growth. A hydroponic greenhouse prototype was developed to capture real-time climate data at high temporal resolution. A custom 1D convolutional neural network (1D-CNN) optimized via a genetic algorithm (GA) was employed to predict environmental fluctuations, achieving R2 scores up to 0.99 and a standard error of prediction (SEP) as low as 0.35%. The system then actuated climate control mechanisms to restore and maintain symmetry. Experimental validation revealed that plants grown under the symmetry-aware control system exhibited significantly improved growth metrics. The results underscore the potential of integrating symmetry-aware DL strategies into precision agriculture in achieving sustainable and resilient plant production systems.