Paola Bandini

Prof. Paola Bandini

New Mexico State University
orcid

Research Focus & Metrics

Academic Career Length

27Years (2000-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2000 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
RSR. Salgado
R. Salgado
Paola BandiniPaola Bandini
Paola Bandini
AKA. Karim
A. Karim
The properties of clean sands pertaining to shear strength and stiffness have been studied extensively. However, natural sands generally contain significant amounts of silt and/or clay. The mechanical response of such soils is different from that of clean sands. This paper addresses the effects of nonplastic fines on the small-strain stiffness and shear strength of sands. A series of laboratory tests was performed on samples of Ottawa sand with fines content in the range of 5–20% by weight. The samples were prepared at different relative densities and were subjected to various levels of mean effective consolidation stress. Most of the triaxial tests were conducted to axial strains in excess of 30%. The stress-strain responses were recorded, and the shear strength and dilatancy parameters were obtained for each fines percentage. Bender element tests performed in triaxial test samples allowed assessment of the effect of fines content on small-strain mechanical stiffness.

1 August 2022 in Géotechnique
Verified
Journal Article
Closed access
AMAlejandro Martinez
Alejandro Martinez
JDJason Dejong
Jason Dejong
IAIdil Akin
Idil Akin
AAAli Aleali
Ali Aleali
CAChloe Arson
Chloe Arson
JZJunxing Zheng
Junxing Zheng
A broad diversity of biological organisms and systems interact with soil in ways that facilitate their growth and survival. These interactions are made possible by strategies that enable organisms to accomplish functions that can be analogous to those required in geotechnical engineering systems. Examples include anchorage in soft and weak ground, penetration into hard and stiff subsurface materials and movement in loose sand. Since the biological strategies have been ‘vetted’ by the process of natural selection, and the functions they accomplish are governed by the same physical laws in both the natural and engineered environments, they represent a unique source of principles and design ideas for addressing geotechnical challenges. Prior to implementation as engineering solutions, however, the differences in spatial and temporal scales and material properties between the biological environment and engineered system must be addressed. Current bio-inspired geotechnics research is addressing topics such as soil excavation and penetration, soil–structure interface shearing, load transfer between foundation and anchorage elements and soils, and mass and thermal transport, having gained inspiration from organisms such as worms, clams, ants, termites, fish, snakes and plant roots. This work highlights the potential benefits to both geotechnical engineering through new or improved solutions and biology through understanding of mechanisms as a result of cross-disciplinary interactions and collaborations.

1 November 2003 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
JCJ. A. H. Carraro
J. A. H. Carraro
Paola BandiniPaola Bandini
Paola Bandini
RSR. Salgado
R. Salgado
Liquefaction of granular soil deposits is one of the major causes of loss resulting from earthquakes. The accuracy in the assessment of the likelihood of liquefaction at a site affects the safety and economy of the design. In this paper, curves of cyclic resistance ratio (CRR) versus cone penetration test (CPT) stress-normalized cone resistance qc1 are developed from a combination of analysis and laboratory testing. The approach consists of two steps: (1) determination of the CRR as a function of relative density from cyclic triaxial tests performed on samples isotropically consolidated to 100 kPa; and (2) estimation of the stress-normalized cone resistance qc1 for the relative densities at which the soil liquefaction tests were performed. A well-tested penetration resistance analysis based on cavity expansion analysis was used to calculate qc1 for the various soil densities. A set of 64 cyclic triaxial tests were performed on specimens of Ottawa sand with nonplastic silt content in the range of 0–15% by weight, and relative densities from loose to dense for each gradation, to establish the relationship of the CRR to the soil state and fines content. The resulting (CRR)7.5-qc1 relationship for clean sand is consistent with widely accepted empirical relationships. The (CRR)7.5-qc1 relationships for the silty sands depend on the relative effect of silt content on the CRR and qc1. It is shown that the cone resistance increases at a higher rate with increasing silt content than does liquefaction resistance, shifting the (CRR)7.5-qc1 curves to the right. The (CRR)7.5-qc1 curves proposed for both clean and silty sands are consistent with field observations.

1 January 2010 in Computer-Aided Civil and Infrastructure Engineering
Verified
Journal Article
Open access
PDF file
ABAlessandra Bianchini
Alessandra Bianchini
Paola BandiniPaola Bandini
Paola Bandini

1 October 2008 in Canadian Geotechnical Journal
Verified
Journal Article
Closed access
JDJ. A. Díaz-Rodríguez
J. A. Díaz-Rodríguez
VAV. M. Antonio-Izarraras
V. M. Antonio-Izarraras
Paola BandiniPaola Bandini
Paola Bandini
JLJ. A. López-Molina
J. A. López-Molina
This paper summarizes the experimental results of a series of cyclic simple shear tests on liquefiable silty sand with and without sample improvement with colloidal silica grout. The objective of the paper is to evaluate the effectiveness of colloidal silica grouting in reducing the liquefaction potential of natural silty sand. Colloidal silica was selected as a stabilizing material due to its low viscosity, wide range of gel times, nontoxicity, and low cost. The soil tested in this experimental program is a poorly graded sand with 11.5% of nonplastic silt from the Port of Lázaro Cárdenas, México. Colloidal silica treated and untreated sand specimens show different pore pressure response and deformation behavior under cyclic loading in simple shear tests. The results indicate that, for a given initial relative density and initial effective vertical stress, liquefiable silty sand specimens stabilized with colloidal silica grout generally exhibit significant gain in liquefaction resistance compared with untreated specimens. It was also found that the colloidal silica grout reduces considerably the rates of pore pressure generation and shear strain of the silty sand specimens subjected to cyclic loading.

1 December 2009 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
Paola BandiniPaola Bandini
Paola Bandini
SSSittampalam Sathiskumar
Sittampalam Sathiskumar
The hydraulic conductivity, the coefficient of consolidation, and the coefficient of volume compressibility play major roles on the pore pressure generation during undrained and partially drained loading of granular soils with fines. This paper aims to determine how much these soil parameters are affected by the percentage of fines and void ratio of the soil. The results of a large number of flexible wall permeameter tests performed on 60 specimens of two poorly graded sands with 0, 5, 10, 15, 20, and 25% nonplastic silt are presented and discussed. Hydraulic conductivity measurements were done at effective confining stresses of 50–300 kPa. The evaluation of the data shows that the hydraulic conductivity and the coefficient of consolidation of sands with 25% silt content are approximately two orders of magnitude smaller than those of clean sands. The coefficient of volume compressibility of the sand-silt mixtures is affected in a lesser degree by void ratio, silt content, and confining stress. The influen...