This paper aims at analyzing the state-of-the-art techniques to measure electrical impedance (and, consequently, electrical resistivity) of mortar/concrete elements. Despite the validity of the concept being widely proven in the literature, a clear standard for this measurement is still missing. Different methods are described and discussed, highlighting pros and cons with respect to their performance, reliability, and degree of maturity. Both monitoring and inspection approaches are possible by using electrical resistivity measurements; since electrical resistivity is an important indicator of the health status of mortar/concrete, as it changes whenever phenomena modifying the conductivity of mortar/concrete (e.g., degradation or attacks by external agents) occur, this review aims to serve as a guide for those interested in this type of measurements.
Professional swimming coaches make use of videos to evaluate their athletes’ performances. Specifically, the videos are manually analyzed in order to observe the movements of all parts of the swimmer’s body during the exercise and to give indications for improving swimming technique. This operation is time-consuming, laborious and error prone. In recent years, alternative technologies have been introduced in the literature, but they still have severe limitations that make their correct and effective use impossible. In fact, the currently available techniques based on image analysis only apply to certain swimming styles; moreover, they are strongly influenced by disturbing elements (i.e., the presence of bubbles, splashes and reflections), resulting in poor measurement accuracy. The use of wearable sensors (accelerometers or photoplethysmographic sensors) or optical markers, although they can guarantee high reliability and accuracy, disturb the performance of the athletes, who tend to dislike these solutions. In this work we introduce swimmerNET, a new marker-less 2D swimmer pose estimation approach based on the combined use of computer vision algorithms and fully convolutional neural networks. By using a single 8 Mpixel wide-angle camera, the proposed system is able to estimate the pose of a swimmer during exercise while guaranteeing adequate measurement accuracy. The method has been successfully tested on several athletes (i.e., different physical characteristics and different swimming technique), obtaining an average error and a standard deviation (worst case scenario for the dataset analyzed) of approximately 1 mm and 10 mm, respectively.
This paper presents the design and the characterization of a portable laser triangulation measurement system for measuring gap and flush in the car body assembly process. Targeting Human in the Loop (HILT) operations in the manufacturing sector, and in line with the vision of human empowerment with Industry 4.0 technologies, the instrument embeds features to ease operators’ activity and compensate possible misuse that could affect the robustness and the quality of data acquired. The device is based on a smartphone integrated with a miniaturized laser triangulation system installed in a cover. The device embodies additional sensors and control systems in order to guarantee operators’ safety (switching on and off the laser line based on specific conditions), support operators during the measurement execution task, and optimize the image acquisition process for minimizing the uncertainty associated to the measurement. The smartphone performs on-board processing and allows Wi-Fi communication with the plant IT infrastructure. Compliance to Industry 4.0 requirements is guaranteed using OPC-UA (Open Platform Communications—Unified Architecture) communication protocol enabling the exchange of live data with the plant middleware. The smartphone provides also an advanced high-resolution color display and well proven and ergonomic human–machine interfaces, which have been fully exploited in the design. The paper introduces the system optical layout and then presents the algorithms implemented to realize the gap and flush measurement. The paper finally presents the calibration of the instrument and estimates its calibration uncertainty in laboratory conditions. Then it discusses how performance decays when the operator handles the instrument on a reference car body. Finally, it shows the analysis of uncertainty when the device is used on real car bodies of different colors in a production line. It is observed that the measurement uncertainty of the whole measurement chain (measurand + instrument + operator + uncontrolled environmental conditions) is larger than the instrument calibration uncertainty because the measurement process is affected by the operator and the variable conditions of the production line.