Paulina Lisiecka-Graca

Dr. Paulina Lisiecka-Graca

AGH University of Science and Technology
orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 August 2020 in ACS Applied Bio Materials
Verified
Journal Article
Open access
ZKZuzanna J. Krysiak
Zuzanna J. Krysiak
ŁKŁukasz Kaniuk
Łukasz Kaniuk
SMSara Metwally
Sara Metwally
PSPiotr Szewczyk
Piotr Szewczyk
ESEwa A. Sroczyk
Ewa A. Sroczyk
Urszula StachewiczUrszula Stachewicz
Urszula Stachewicz
Atopic dermatitis (eczema) is a widespread disorder, with researchers constantly looking for more efficacious treatments. Natural oils are reported to be an effective therapy for dry skin, and medical textiles can be used as an alternative or supporting therapy. In this study, fibrous membranes from poly(vinyl butyral-co-vinyl alcohol-co-vinyl acetate) (PVB) with low and high molecular weights were manufactured to obtained nano- and micrometer fibers via electrospinning for the designed patches used as oil carriers for atopic skin treatment. The biocompatibility of PVB patches was analyzed using proliferation tests and scanning electron microscopy (SEM), which combined with focused ion beam (FIB) allowed for the 3D visualization of patches. The oil spreading tests with evening primrose, black cumin seed and borage were verified with cryo – SEM, showed the advantage nanofibers have over microfibers as carriers for low viscosity oils. The skin tests expressed the usability and the enhanced oil delivery performance for electrospun patches. We demonstrate that through material nano- and microstructure, commercially available polymers such as PVB have great potential to be deployed as biomaterial in medical applications, such as topical treatments for chronic skin conditions.

1 May 2024 in Metallurgical and Materials Transactions A
Verified
Journal Article
Open access
PDF file
PLPiotr Ledwig
Piotr Ledwig
HPHubert Pasiowiec
Hubert Pasiowiec
KCKamil Cichocki
Kamil Cichocki
PLPaulina Lisiecka-Graca
Paulina Lisiecka-Graca
KGKewin Gola
Kewin Gola
BDBeata Dubiel
Beata Dubiel
This study investigates the effect of laser power applied for a remelting scan in the laser powder bed fusion process on the formation of a bimodal microstructure and its impact on the mechanical properties of Ni-based Inconel 625 superalloy. Comparison of primary and remelting scans at similar surface energy densities revealed that the melt pools obtained in the remelting scan are smaller than in the primary scan. To achieve comparable remelted melt pool sizes, the 25 pct increase in energy is required. The shape and size of the remelted melt pools significantly affect the microstructure and material texture. The lower surface energy density in laser powder bed fusion favors the formation of a bimodal microstructure with large columnar grains and fine grain bands. Application of higher energy results in the formation of large columnar grains with Goss texture along build direction and separated by a large amount of low angle grain boundaries. Remelting scan also affects reduction of porosity and increasing of the area fraction of nanometric oxide inclusions. The study revealed that the samples subjected to a remelting laser scan and tensile tested along the direction of columnar grains exhibited higher ductility, which was associated with a slight decrease in the ultimate tensile strength compared to the samples that were not remelted. It was demonstrated that the remelting scan in the laser powder bed fusion process offers the possibility of improving the reliability of additively manufactured Inconel 625 superalloy by reducing porosity and tailoring its microstructure towards single-crystal-like, and thus improving the mechanical properties. Graphical Abstract

21 August 2020 in Metals
Verified
Journal Article
Open access
PDF file
Krzysztof MuszkaKrzysztof Muszka
Krzysztof Muszka
DZDawid Zych
Dawid Zych
PLPaulina Lisiecka-Graca
Paulina Lisiecka-Graca
Lukasz MadejLukasz Madej
Lukasz Madej
Janusz MajtaJanusz Majta
Janusz Majta
In this study, large-scale molecular dynamic simulations were performed to analyze the dislocation substructure interaction with various types of obstacles present in microalloyed steels during severe plastic deformation. Specifically, fully functional numerical models of the atomic upsetting test were developed, with particular emphasis on the presence of precipitates inside the microstructure grains. The obtained results compared with the microstructural tests, performed using Electron Backscatter Diffraction (EBSD) and Transmission Electron Microscope (TEM) techniques, allowed for a more accurate assessment of the microstructure refinement mechanisms by means of the in-situ recrystallization effect in the deformed samples subjected to the multi-axis compression using the MaxStrain system (Dynamic Systems Inc., New York, NY, USA).

14 May 2021 in Archives of Civil and Mechanical Engineering
Verified
Journal Article
Open access
PDF file
PLPaulina Lisiecka-Graca
Paulina Lisiecka-Graca
KBKrzysztof Bzowski
Krzysztof Bzowski
Janusz MajtaJanusz Majta
Janusz Majta
Krzysztof MuszkaKrzysztof Muszka
Krzysztof Muszka
The mechanical behaviours of microalloyed and low-carbon steels under strain reversal were modelled based on the average dislocation density taking into account its allocation between the cell walls and cell interiors. The proposed model reflects the effects of the dislocations displacement, generation of new dislocations and their annihilation during the metal-forming processes. The back stress is assumed as one of the internal variables. The value of the initial dislocation density was calculated using two different computational methods, i.e. the first one based on the dislocation density tensor and the second one based on the strain gradient model. The proposed methods of calculating the dislocation density were subjected to a comparative analysis. For the microstructural analysis, the high-resolution electron backscatter diffraction (EBSD) microscopy was utilized. The calculation results were compared with the results of forward/reverse torsion tests. As a result, good effectiveness of the applied computational methodology was demonstrated. Finally, the analysis of dislocation distributions as an effect of the strain path change was performed.

1 March 2024 in Materials Science-Poland
Verified
Journal Article
Open access
PDF file
PLPaulina Lisiecka-Graca
Paulina Lisiecka-Graca
ŁLŁukasz Lisiecki
Łukasz Lisiecki
KZKrystian Zyguła
Krystian Zyguła
MWMarek Wojtaszek
Marek Wojtaszek
Nanobainitic steels exhibit an exceptional combination of high strength, good plasticity, impact toughness, and wear resistance. They are suitable for the production of large mass components through the open-die forging process. Subsequently, the forgings are air-cooled. An obstacle of this method is the extended time required for the large forgings to undergo a bainitic transformation, making the industrial implementation of this process economically unjustifiable. Nevertheless, nanobainitic steels also allow for the open-die forging of small batches of structural elements with high property requirements. A technological limitation lies in the necessity of performing a series of operations, leading to a prolonged processing time dependent on the shape of the product and the degree of deformation. Therefore, inter-operational reheating is often necessary, incurring costs and time consumption. This is particularly relevant to forgings with a mass ranging from a few to several dozen kilograms, which, due to their low thermal capacity, rapidly dissipate heat to the surroundings and tools. Designing an economical process with a limited number of reheating cycles requires advanced knowledge of material behavior under thermo-mechanical deformation parameters, including boundary conditions where a significant decrease in plasticity occurs and the risk of crack initiation. To obtain this information, a comprehensive analysis of the influence of thermo-mechanical parameters applied during the deformation of nanobainitic steel at relatively low temperatures on the flow characteristics and crack formation was conducted. To achieve this goal, the Digital Image Correlation method, the finite element method modeling considering damage criteria, and the macrostructural evaluation of deformed specimens were employed.

1 January 2020 in Procedia Manufacturing
Verified
Journal Article
Open access
KMKwiecień Marcin
Kwiecień Marcin
LŁLisiecki Łukasz
Lisiecki Łukasz
PLPaulina Lisiecka-Graca
Paulina Lisiecka-Graca
Krzysztof MuszkaKrzysztof Muszka
Krzysztof Muszka
Janusz MajtaJanusz Majta
Janusz Majta