Paulo Gonçalves

Prof. Dr. Paulo Gonçalves

Universidade Federal de Itajubá (UNIFEI)
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 September 2021 in Materials
Verified
Journal Article
Open access
PDF file
MMMaria Auxiliadora de Barros Martins
Maria Auxiliadora de Barros Martins
LSLucas Da Silva
Lucas Da Silva
Maria Gabriela RanieriMaria Gabriela Ranieri
Maria Gabriela Ranieri
RBRegina Mambeli Barros
Regina Mambeli Barros
VSValquíria Santos
Valquíria Santos
MMMirian Melo
Mirian Melo
The reuse of waste in civil construction brings environmental and economic benefits. However, for these to be used in concrete, it is necessary a previous evaluation of their physical and chemical characteristics. Thus, this study aimed to characterize and analyze the waste foundry exhaust sand (WFES) for use in self-compacting concrete (SCC). Foundry exhaust sand originates from the manufacturing process of sand molds and during demolding of metal parts. It is a fine sand rich in silica in the form of quartz collected by baghouse filter. Characterization of WFES was conducted through laser granulometry, scanning electron microscopy (SEM) in the energy dispersive spectroscopy (EDS) mode, X-ray diffraction (XRD), X-ray fluorescence (XRF), Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG) and derivative thermogravimetry (DTG) techniques. The waste was classified as non-hazardous and non-inert, with physical and chemical properties suitable for use in SCC composition, as fine aggregate or mineral addition. Five mixtures of SCC were developed, in order to determine the waste influence in both fresh and hardened concrete. The properties in the fresh state were reached. There was an increase in compressive strength and sulfate resistance, a decrease in water absorption of self-compacting concrete by incorporating WFES as 30% replacement.

21 October 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
LSLucas Da Silva
Lucas Da Silva
JSJosimara da Silva
Josimara da Silva
MFMatheus Francisco
Matheus Francisco
Vander Alkmin dos Santos RibeiroVander Alkmin dos Santos Ribeiro
Vander Alkmin dos Santos Ribeiro
Michel Henry SouzaMichel Henry Souza
Michel Henry Souza
MMMirian Melo
Mirian Melo
The inadequate disposal of household appliances by consumers and industries have annually been generating enormous amounts of polymeric waste (PW). So, the interest in reuse of PW in civil construction has increased. The production of new cementitious materials, such as concrete with PW, proves to be a promising solution to inappropriate disposal of this waste. In this study, self-compacting concrete (SCC) was developed with partial replacement of the coarse aggregates by polymeric waste (PW) from the recycling of refrigerators. In the SCC reference mixture, Portland cement, silica fume, sand, gravel and superplasticizer were used. The study also grouped the gravel as replaced by 5%, 10%, 15% and 20% of PW. In order to analyze the samples, the following tests were used: spreading, viscosity, passing ability, compressive strength, tensile strength, microstructure, modulus of elasticity, specific gravity, absorption, voids index and electrical resistivity. The SCC found showed adequate homogeneity and viscosity, staying within the normative parameters. The mechanical resistance was above 20 MPa; specific mass between 1870 to 2260 kg/m3; modulus of elasticity ranged from 34 to 14 GPa; and electrical resistivity between 319 to 420 ohm.m. Due to the mechanical resistance, the SCC with PW can be used for structural purposes and densely reinforced structures such as pillars, beams and foundation elements.

1 March 2023 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
PDF file
LSLucas Da Silva
Lucas Da Silva
MFMatheus Brendon Francisco
Matheus Brendon Francisco
RMRoberta Moraes Martins
Roberta Moraes Martins
Paulo GonçalvesPaulo Gonçalves
Paulo Gonçalves
VSValquíria Claret dos Santos
Valquíria Claret dos Santos
MMMirian de Lourdes Noronha Motta Melo
Mirian de Lourdes Noronha Motta Melo
To generate sustainable mortars, this study investigated the impacts of adding two wastes into portland cement mortar: polyurethane powder waste (PU), and foundry exhaust sand (FES). The tests were carried out utilizing a response surface methodology (RSM) configuration with four different manufacturing variables: sand to cement ratio, coarse sand content (CS), FES, and PU replacing natural sand (NS). Compressive strength, modulus of elasticity, void index, and water absorption (Wa) all had substantial fitting values in the data. Furthermore, the experimental findings show that the adopted model is capable of accurately predicting the outcomes, and an optimized mortar combination was discovered and is presented.

16 January 2022 in Research, Society and Development
Verified
Journal Article
Open access
PDF file
ASAna Paula Teixeira da Silva
Ana Paula Teixeira da Silva
LSLucas Da Silva
Lucas Da Silva
Vander Alkmin dos Santos RibeiroVander Alkmin dos Santos Ribeiro
Vander Alkmin dos Santos Ribeiro
MMMirian Melo
Mirian Melo
Paulo GonçalvesPaulo Gonçalves
Paulo Gonçalves
Michel Henry SouzaMichel Henry Souza
Michel Henry Souza
This paper aims to analyze the characteristics of self-compacting mortar (SCM) with the partial replacement of cement by water treatment sludge (WTS). This replacement aims to contribute to minimize environmental degradation arising from the production of materials used in construction and to give a sustainable destination to the sludge generated in water treatment plants. In this study, the substitution of cement in 10 and 20% for the WTS from the Itajubá Water Treatment Plant in Minas Gerais was analyzed. The residue was collected, filtered, dried and ground, so that the granulometric analyses could be performed and the data inserted in the EMMA particle packing software. Regarding the mortar, the properties in the fresh state were verified through the spreading and flow tests, in which all mixtures could be defined as self-compacting. Regarding the mechanical properties, compression, flexural tensile and modulus of elasticity tests were performed after 28 days of curing. In the mixtures containing WTS, the mechanical strengths and modulus of elasticity decreased. Furthermore, in the hardened state, a reduction in specific mass and an increase in the voids index and absorption was observed in the traces containing WTS. The results indicate that WTS could be used only for non-structural function. However, the results obtained reinforce the need for further studies on the subject, maintaining the possibility of using the WTS in civil construction.

28 June 2023 in Buildings
Verified
Journal Article
Open access
PDF file
Michel Henry SouzaMichel Henry Souza
Michel Henry Souza
LSLucas Da Silva
Lucas Da Silva
Vander Alkmin dos Santos RibeiroVander Alkmin dos Santos Ribeiro
Vander Alkmin dos Santos Ribeiro
Paulo GonçalvesPaulo Gonçalves
Paulo Gonçalves
MMMirian Melo
Mirian Melo
VSValquíria Santos
Valquíria Santos
Self-compacting concrete (SCC) is an innovative type of concrete that does not require vibration for compaction; however, it needs attention in relation to the control of thermally generated cracks, due to the hydration heat generated mainly during the curing process in pieces with large concrete volume. In this study we investigated the addition of Superabsorbent Polymers (SAP) as internal curing elements in self-compacting mortar (SCM), as well as its thermal and mechanical characteristics, looking to obtain the optimal proportion of materials in a way that is useful as the basis of self-compacting concrete use, focusing on large volume structures. This work stands out for studying an alternative for shrinkage control, in an unconventional cementitious composite, highlighting the thermal analysis of the mixture. In the experimental program, laboratory trials were conducted using self-compacting mortar with the addition of 0%, 0.1%, and 0.2% of SAP either for CPII-E-32 and CPV-ARI and with samples undergoing both dry and submerged curing. Among the results obtained, the reduction of variation in temperature in samples with added SAP stand out, and it is possible to presume it as being a viable way of mitigating the temperature spikes in large volume concrete parts. By contrast, the compression and tensile tests indicated a reduced strength, except in the tensile trial on the CPII-E-32, which the addition of SAP resulted in an increase in strength.

23 October 2021 in Research, Society and Development
Verified
Journal Article
Open access
PDF file
Michel Henry SouzaMichel Henry Souza
Michel Henry Souza
Paulo GonçalvesPaulo Gonçalves
Paulo Gonçalves
LSLucas Da Silva
Lucas Da Silva
MMMirian Melo
Mirian Melo
VSValquíria Santos
Valquíria Santos
Superabsorbent polymers (SAP) have gained the attention of the engineering field for applications in cementitious composites. Recently, many studies have addressed using these materials as an alternative to controlling recurrent pathologies, especially retraction in the hardening stage. This study conducted a literature review in the Scopus and Web of Science databases to identify relevant studies for future research in this area. Analyses were performed using the RStudio software program, where data on the number of publications, the main authors and journals, the most used keywords, and most common countries of publication were analyzed. Furthermore, bibliographic coupling and co-citation analyses were carried out. The results indicate that the most published authors were De Belie, Snoeck and Liu J., and the most cited authors were Jensen, Schrofl and Snoeck. Although Brazil is among the fifteen most published countries, it was not among the most cited, showing lacks in studies. In total, 343 articles were found in the Scopus database and 369 in the Web of Science.