In order to understand the effect of grain size on the mechanical and electrical responses of natural-cooled high-temperature granite, uniaxial compression tests were carried out on natural cooled coarse- and fine-grained granite samples subjected to thermal treatment at room temperature, 200 °C, 400 °C, and 600 °C respectively. The resistivity and acoustic emission (AE) during the compression were monitored and changes in physical and mechanical properties, the AE and resistivity characteristics in the loading process were analyzed. Results show that high temperature exerts a more significant effect on deteriorating the coarse-grained granite. Changes in resistivity can reflect the development of rock damage. Corresponding to the compaction stage, crack initiation and stable propagation stage, and crack rapid propagation stage of rock under compressive load, changes in resistivity can be divided into three stages accordingly, including the initial rapid descent stage, the gentle descent stage, and the secondary rapid descent stage for the thermal-treated rock at 25–400 °C. The secondary rapid descent stage of resistivity can be used as a precursor for rock entering into the failure stage. The resistivity change is more sensitive to the damage development in coarse-grained granite.
To investigate the dynamic compressive properties and the law of energy dissipation of freeze–thaw-damaged sandstone, static and dynamic compressive experiments were conducted. The influences of the number of freeze–thaw cycles and strain rate on strength characteristics, energy dissipation rate and the fractal dimension characteristics of sandstone were evaluated. Based on the peak energy dissipation rate, a freeze–thaw damage variable was established. The results show that peak strength increases exponentially with strain rate, and there exists a strain rate threshold. When strain rate is below this threshold, the increasing rate of the DIF slows down with the increase in the number of freeze–thaw cycles; when strain rate is higher than this threshold, the increasing rate of the DIF increases with the increase in the number of freeze–thaw cycles. In addition, the fractal dimension increases with the number of freeze–thaw cycles as well as the strain rate. Based on the freeze–thaw damage variable established, the damage degree of sandstone under freeze–thaw cycling can be characterized.
19 December 2023 in Deep Underground Science and Engineering
In order to understand the mechanical properties and the fracture surface roughness characteristics of thermally damaged granite under dynamic splitting, dynamic Brazilian splitting tests were conducted on granite samples after thermal treatment at 25, 200, 400, and 600°C. Results show that the dynamic peak splitting strength of thermally damaged granite samples increases with increasing strain rate, showing obvious strain‐rate sensitivity. With increasing temperature, thermally induced cracks in granite transform from intergranular cracks to intragranular cracks, and to a transgranular crack network. Thermally induced damages reduce the dynamic peak splitting strength and the maximum absorbed energy while increasing the peak radial strain. The fracture mode of the thermally damaged granite under dynamic loads is mode II splitting failure. By using the axial roughness index , the distribution ranges of the wedge‐shaped failure zones and the tensile failure zones in the fracture surfaces under dynamic Brazilian splitting can be effectively identified. The radial roughness index is sensitive to the strain rate and temperature. It shows a linear correlation with the peak splitting strength and the maximum absorbed energy and a linear negative correlation with the peak radial strain. can be used to quantitatively estimate the dynamic parameters based on the models proposed.
The dynamic fracture of rocks under impact loads has many engineering applications such as rock blasting. This study reviews the recent achievements of investigating rock dynamic fracturing and its application in rock blasting using computational mechanics methods and highlights the prospects of modelling them with a hybrid finite-discrete element method (HFDEM) originally developed by the authors. The review first summarizes the peculiarities of rock dynamic fracturing compared with static fracturing, which are that the physical-mechanical properties of rocks, including stress wave propagation, strength, fracture toughness, energy partition and cracking mechanism, depend on loading rate. Then the modelling of these peculiarities and their applications in rock blasting using fast developing computational mechanics methods are reviewed with a focus on the advantages and disadvantages of prevalent finite element method (FEM) as representative continuum method, discrete element method (DEM) as representative discontinuum method and combined finite-discrete element (FDEM) as representative hybrid method, which highlights FDEM is the most promising method for modelling rock dynamic fracture and blasting application as well as points out the research gaps in the field of modelling the dynamic fracture of rocks under impact loads. After that, the progress of shortening some of these gaps by developing and applying HFDEM, i.e., the authors’ version of FDEM, for modelling rock dynamic fracture and applications in rock blasting are reviewed, which include the features of modelling the effects of loading rate; stress wave propagation, reflection and absorbing as well as stress wave-induced fracture; explosive-rock interaction including detonation-induced gas expansion and flow through fracturing rock; coupled multiaxial static and dynamic loads; heterogeneous rock and rock mass with pre-existing discrete fracture network; and dynamic fracturing-induced fragment size distribution. Finally, the future directions of modelling the dynamic fracture of rocks under impact loads are highlighted and a systematic numerical approach is proposed for modelling rock blasting.