Petya Tsvetanova Petrova

Dr. Petya Tsvetanova Petrova

institute of catalysis bulgarian academy of sciences, Sofia, Sofia-Grad, Bulgaria

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 October 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
LILyuba Ilieva
Lyuba Ilieva
PPPetya Tsvetanova Petrova
Petya Tsvetanova Petrova
Anna Maria VeneziaAnna Maria Venezia
Anna Maria Venezia
EAElena Maria Anghel
Elena Maria Anghel
Razvan Nicolae StateRazvan Nicolae State
Razvan Nicolae State
Tatyana TabakovaTatyana Tabakova
Tatyana Tabakova
Considerable efforts to reduce the harmful emissions of volatile organic compounds (VOCs) have been directed towards the development of highly active and economically viable catalytic materials for complete hydrocarbon oxidation. The present study is focused on the complete benzene oxidation as a probe reaction for VOCs abatement over Co3O4-CeO2 mixed oxides (20, 30, and 40 wt.% of ceria) synthesized by the more sustainable, in terms of less waste, less energy and less hazard, mechanochemical mixing of cerium hydroxide and cobalt hydroxycarbonate precursors. The catalysts were characterized by BET, powder XRD, H2-TPR, UV resonance Raman spectroscopy, and XPS techniques. The mixed oxides exhibited superior catalytic activity in comparison with Co3O4, thus, confirming the promotional role of ceria. The close interaction between Co3O4 and CeO2 phases, induced by mechanochemical treatment, led to strained Co3O4 and CeO2 surface structures. The most significant surface defectiveness was attained for 70 wt.% Co3O4-30 wt.% CeO2. A trend of the highest surface amount of Co3+, Ce3+ and adsorbed oxygen species was evidenced for the sample with this optimal composition. The catalyst exhibited the best performance and 100% benzene conversion was reached at 200 °C (relatively low temperature for noble metal-free oxide catalysts). The catalytic activity at 200 °C was stable without any products of incomplete benzene oxidation. The results showed promising catalytic properties for effective VOCs elimination over low-cost Co3O4-CeO2 mixed oxides synthesized by simple and eco-friendly mechanochemical mixing.

16 July 2018 in Catalysts
Verified
Journal Article
Open access
PDF file
LILyuba Ilieva
Lyuba Ilieva
Anna Maria VeneziaAnna Maria Venezia
Anna Maria Venezia
PPPetya Tsvetanova Petrova
Petya Tsvetanova Petrova
Giuseppe PantaleoGiuseppe Pantaleo
Giuseppe Pantaleo
Leonarda Francesca LiottaLeonarda Francesca Liotta
Leonarda Francesca Liotta
Tatyana TabakovaTatyana Tabakova
Tatyana Tabakova
Mono metallic and bimetallic Pd (1 wt. %)–Au (3 wt. %) catalysts were prepared using two ceria supports doped with 1 wt. % Y2O3. Yttrium was added by impregnation or co-precipitation. The catalyst synthesis was carried out by deposition–precipitation method, with sequential deposition–precipitation of palladium over previously loaded gold in the case of the bimetallic samples. The obtained materials, characterized by X-ray powder diffraction (XRD), High resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and temperature programmed reduction (TPR) techniques, were tested in the complete benzene oxidation (CBO). The results of the characterization analyses and the catalytic performance pointed to a close relationship between structural, redox, and catalytic properties of mono and bimetallic catalysts. Among the monometallic systems, Pd catalysts were more active as compared to the corresponding Au catalysts. The bimetallic systems exhibited the best combustion activity. In particular, over Pd–Au supported on Y-impregnated ceria, 100% of benzene conversion towards total oxidation at the temperature of 150 °C was obtained. Comparison of surface sensitive XPS results of fresh and spent catalysts ascertained the redox character of the reaction.

20 November 2018 in Catalysts
Verified
Journal Article
Open access
PDF file
Tatyana TabakovaTatyana Tabakova
Tatyana Tabakova
IIIvan Bogoev Ivanov
Ivan Bogoev Ivanov
Yordanka KarakirovaYordanka Karakirova
Yordanka Karakirova
DKDaniela Karashanova
Daniela Karashanova
Anna Maria VeneziaAnna Maria Venezia
Anna Maria Venezia
KIKrasimir Ivanov
Krasimir Ivanov
The water-gas shift (WGS) reaction is a well-known industrial process used for the production of hydrogen. During the last few decades, it has attracted renewed attention due to the need for high-purity hydrogen for fuel-cell processing systems. The aim of the present study was to develop a cost-effective and catalytically efficient formulation that combined the advantageous properties of transition metal oxides and gold nanoparticles. Alumina-supported copper- manganese mixed oxides were prepared by wet impregnation. The deposition-precipitation method was used for the synthesis of gold catalysts. The effect of the Cu:Mn molar ratio and the role of Au addition on the WGS reaction’s performance was evaluated. Considerable emphasis was put on the characterization of the as-prepared and WGS-tested samples by means of a number of physicochemical methods (X-ray powder diffraction, high-resolution transmission electron microscopy, electron paramagnetic resonance, X-ray photoelectron spectroscopy, and temperature-programmed reduction) in order to explain the relationship between the structure and the reductive and WGS behavior. Catalytic tests revealed the promotional effect of gold addition. The best performance of the gold-promoted sample with a higher Cu content, i.e., a Cu:Mn molar ratio of 2:1 might be related to the beneficial role of Au on the spinel decomposition and the highly dispersed copper particle formation during the reaction, thus, ensuring the presence of two highly dispersed active metallic phases. High-surface-area alumina that was modified with a surface fraction of Cu–Mn mixed oxides favored the stabilization of finely dispersed gold particles. These new catalytic systems are very promising for practical applications due to their economic viability because the composition mainly includes alumina (80%).

7 August 2013 in Catalysis Letters
Verified
Journal Article
Closed access
PDF file
III. Ivanov
I. Ivanov
PPPetya Tsvetanova Petrova
Petya Tsvetanova Petrova
VGVladimir Georgiev
Vladimir Georgiev
TBTodor Batakliev
Todor Batakliev
Yordanka KarakirovaYordanka Karakirova
Yordanka Karakirova
SRS. Rakovsky
S. Rakovsky

8 July 2016 in Catalysts
Verified
Journal Article
Open access
PDF file
LILyuba Ilieva
Lyuba Ilieva
PPPetya Tsvetanova Petrova
Petya Tsvetanova Petrova
Leonarda Francesca LiottaLeonarda Francesca Liotta
Leonarda Francesca Liotta
JSJanusz W. Sobczak
Janusz W. Sobczak
WLWojciech Lisowski
Wojciech Lisowski
Tatyana TabakovaTatyana Tabakova
Tatyana Tabakova
Gold (3 wt. %) catalysts on Y-doped (1, 2.5, 5 and 7.5 wt. % Y2O3) ceria supports prepared by coprecipitation (CP) or impregnation (IM) were studied in complete benzene oxidation (CBO). A low-extent Y modification was chosen to avoid ordering of oxygen vacancies. The samples were characterized by XRD, TGA, XPS and TPR techniques. A positive role of air pretreatment at 350 °C as compared to 200 °C was established for all Y-containing catalysts and it was explained by cleaning the active sites from carbonates. The oxygen supply cannot be considered as a limiting step for benzene oxidation except for the high 7.5%-doped samples, as suggested by TGA and TPR data. On the basis of XPS results of fresh and used in CBO catalysts, the presence of cationic gold species does not seem important for high CBO activity. The gold catalyst on an IM support with 1% Y-doping exhibited the best performance. A 100% benzene conversion was achieved only over this catalyst and Au/ceria, while it was not reached even at 300 °C over all other studied catalysts. Gold and ceria particle agglomeration or coke formation should be excluded as a possible reason, and the most probable explanation could be associated with the importance of the benzene activation stage.

6 February 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Tatyana TabakovaTatyana Tabakova
Tatyana Tabakova
LILyuba Ilieva
Lyuba Ilieva
PPPetya Tsvetanova Petrova
Petya Tsvetanova Petrova
Anna Maria VeneziaAnna Maria Venezia
Anna Maria Venezia
Yordanka KarakirovaYordanka Karakirova
Yordanka Karakirova
GAGeorgi Avdeev
Georgi Avdeev
The protection of environment and human health stimulates intensive research for abatement of volatile organic compounds (VOCs) in the atmosphere. Complete catalytic oxidation is an efficient, environmentally friendly and economically feasible method for elimination of VOCs. This study aims to design high performing and cost-effective catalytic formulations by exploration of appropriate and economically viable supports. Alumina-supported ceria (30 wt.%) and Y2O3 (1 wt.%)-doped ceria were prepared by mechanical mixing and were used as support of mono Au (2 wt.%) and Pd (1 wt.%) and bimetallic Pd-Au catalysts. The characterization by textural measurements, X-ray powder diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), EPR (electron paramagnetic resonance) and temperature-programmed reduction (TPR) was carried out in order to clarify the relationship between catalyst composition, textural, structural and surface properties, reducibility and catalytic performance for complete benzene oxidation. Among all studied catalysts, Pd-based catalysts exhibited the best combustion activity. In particular, monometallic Pd on alumina supported Y-doped ceria attained 100% of complete benzene conversion at 180 °C. These catalytic materials have potential to meet stringent emission regulations in an economical and effective way.