This paper proposes a fault-tolerant control (FTC) strategy using the current space vectors to diagnose sensor failures and enhance the sustained operation of a field-oriented (FO) controlled induction motor drive (IMD). Three space vectors are established for the sensor fault diagnosis technique, including one converted from the measured currents and the other two calculated from the current estimation technique, respectively, measured and with reference speeds. A mixed mathematical model using three space vectors and their components is proposed to accurately determine the fault condition of each sensor in the motor drive. After determining the operating status of each sensor, if the sensor signal is in good condition, the feedback signal to the controller will be the measured signal; otherwise, the estimated signal will be used instead of the failed signal. Failure states of the various sensors were simulated to check the effectiveness of the proposed technique in the Matlab/Simulink environment. The simulation results are positive: the IMD system applying the proposed FTC technique accurately detected the failed sensor and maintained stability during the operation.
1 December 2021 in International Journal of Power Electronics and Drive Systems (IJPEDS)
In this paper, a Hopfield Lagrange network (HLN) method is applied to solve the optimal load dispatch (OLD) problem under the concern of the competitive electric market. The duty of the HLN is to determine optimal active power output of thermal generating units in the aim of maximizing the benefit of electricity generation from all available units. In addition, the performance of the HLN is also tested by using five different functions consisting of the logistic, hyperbolic tangent, Gompertz, error, and Gudermanian functions for updating outputs of continuous neurons. The five functions are tested on two systems with three units and 10 units considering two revenue models in which the first model considers payment for power delivered and the second model concerns payment for reserve allocated. In order to evaluate the real effectiveness and robustness of the HLN, comparisons with other methods such as particle swarm optimization (PSO), the cuckoo search algorithm (CSA) and differential evolution (DE) are also implemented on the same systems. High benefits and fast execution time from the HLN lead to a conclusion that the HLN should be applied for solving the OLD problem in a competitive electric market. Among the five applied functions, error function is considered to be the most effective one because it can support the HLN to find the highest benefit and reach the fastest convergence with the smallest number of iterations. Thus, it is suggested that error function should be used for updating outputs for continuous neurons of the HLN.
18 October 2024 in Electrical Engineering & Electromechanics
Introduction. Recently, three-phase induction motor drives have been widely used in industrial applications; however, the feedback signal failures of current sensors can seriously degrade the operation performance of the entire drive system. Therefore, the motor drives require a proper solution to prevent current sensor faults and improve the reliability of the motor drive systems. The novelty of the proposed research includes integrating the current sensor fault-tolerant control (FTC) function according to enhanced technique into the field-oriented control loop for speed control of the motor drive system. Purpose. This research proposes a hybrid method involving a third difference operator and signal comparison algorithm to diagnose various types of current sensor faults as a positive solution to enhance the stability of the induction motor drive system. Methods. A hybrid method involving a third difference operator for the measured speed signals and a comparison algorithm between measured and estimated current signals are proposed to diagnose the current sensors’ health status in the fault-tolerant process. After determining the faulty sensor, the estimated current signals based on the Luenberger observer are used immediately to replace the defective sensor signal. Results. The current sensor is simulated with various failure types, from standard to rare failures, to evaluate the performance of the FTC method implemented in the MATLAB/Simulink environment. Simultaneously, a fault flag corresponding to a defective sensor should be presented as an indicator to execute the repair process for faulty sensors at the proper time. Practical value. Positive results have proven the feasibility and effectiveness of the proposed FTC integrated into the speed controller to improve reliability and ensure the stable operation of the induction motor drive system even under current sensor fault conditions. References 29, tables 3, figures 10.
1 October 2018 in TELKOMNIKA (Telecommunication Computing Electronics and Control)
Introduction. In the typical field-oriented control (FOC) method, the variation of machine resistance is not considered when calculating the rotor flux angle. This omission affects the accuracy of the control method during motor operation, leading to potential performance degradation. Problem. Neglecting stator resistance variations in the voltage model-based FOC technique can cause rotor flux angle estimation deviation. This inaccuracy impacts motor speed control, especially under varying operating conditions where resistance changes due to temperature fluctuations. Goal. This paper aims to improve the accuracy of rotor flux angle estimation in the voltage model-based FOC technique by incorporating a real-time stator resistance estimation process. Methodology. The proposed research integrates a model reference adaptive system to estimate the stator resistance and replaces the rated resistance value in the rotor flux angle calculation algorithm of the FOC technique. The effectiveness of the method is evaluated by using MATLAB/Simulink simulations, where the estimated resistance value is compared with the actual resistance value, and the motor speed control performance is analyzed. Simulation results demonstrate that the proposed method significantly enhances the accuracy of rotor flux angle estimation by adapting to changes in stator resistance. This improvement ensures better motor speed control performance, reducing deviations between the actual and reference speeds under different operating conditions. Scientific novelty of this research lies in integrating real-time stator resistance estimation into the rotor flux angle calculation process of the voltage model-based FOC technique, addressing a key limitation in typical FOC approaches. Practical value. By improving the accuracy of rotor flux angle estimation, the proposed method enhances the stability and efficiency of motor speed control. This ensures better performance in industrial applications where precise motor control is essential under varying operating conditions. References 27, figures 11.