Water electrolysis powered by renewable energies is a promising technology to produce sustainable fossil free fuels. The development and evaluation of effective catalysts are here imperative; however, due to the inclusion of elements with different redox properties and reactivity, these materials undergo dynamical changes and phase transformations during the reaction conditions. NiMoO4 is currently investigated among other metal oxides as a promising noble metal free catalyst for the oxygen evolution reaction. Here we show that at applied bias, NiMoO4·H2O transforms into γ-NiOOH. Time resolved operando Raman spectroscopy is utilized to follow the potential dependent phase transformation and is collaborated with elemental analysis of the electrolyte, confirming that molybdenum leaches out from the as-synthesized NiMoO4·H2O. Molybdenum leaching increases the surface coverage of exposed nickel sites, and this in combination with the formation of γ-NiOOH enlarges the amount of active sites of the catalyst, leading to high current densities. Additionally, we discovered different NiMoO4 nanostructures, nanoflowers, and nanorods, for which the relative ratio can be influenced by the heating ramp during the synthesis. With selective molybdenum etching we were able to assign the varying X-ray diffraction (XRD) pattern as well as Raman vibrations unambiguously to the two nanostructures, which were revealed to exhibit different stabilities in alkaline media by time-resolved in situ and operando Raman spectroscopy. We advocate that a similar approach can beneficially be applied to many other catalysts, unveiling their structural integrity, characterize the dynamic surface reformulation, and resolve any ambiguities in interpretations of the active catalyst phase.
20 January 2024 in Physical Chemistry Chemical Physics
A set of ∼9 nm CoFe 2 O 4 nanoparticles substituted with Zn 2+ and Ni 2+ was prepared by thermal decomposition of metallic acetylacetonate precursors to correlate the effects of the replacement of Co 2+ with the resulting magnetic properties.
5 March 2021 in The Journal of Physical Chemistry C
Magnetic nanocomposites (NCs) are extremely appealing for a wide range of energy-related technological applications, specifically as building blocks for next-generation permanent magnets. The design of such nanostructures requires precise chemical synthesis methods, which will permit the fine-tuning of the magnetic properties. Here we present an in-depth structural, morphological and magnetic characterization of ferrite-based nanostructures obtained through a bottom-up sol–gel approach. The combination of the high coercivity of a hard phase SrFe12O19 (SFO) and the high saturation magnetization of a soft phase, CoFe2O4 (CFO), allowed us to develop exchange-coupled bimagnetic NCs. A symbiotic effect is observed in a SFO/CFO nanocomposite, as the unique oriented growth of SFO prevents grain growth of the CFO, thus restricting the crystallite size of both. Through X-ray powder diffraction (XRPD), transmission electron microscopy (TEM), and magnetic measurements we clarify the relationship between the distribution and size of hard/soft particles, the optimization of interfaces and the obtained uniform magnetic response. This study allowed us to establish the potentiality of hard/soft SFO/CFO nanostructures in current permanent magnet technology.
The magnetic properties of SrFe12O19 (SFO) hard hexaferrites are governed by the complex relation to its microstructure, determining their relevance for permanent magnets´ applications. A set of SFO nanoparticles obtained by sol–gel self-combustion synthesis was selected for an in-depth structural X-Rays powder diffraction (XRPD) characterization by means of G(L) line-profile analysis. The obtained crystallites´ size distribution reveal a clear dependence of the size along the [001] direction on the synthesis approach, resulting in the formation of platelet-like crystallites. In addition, the size of the SFO nanoparticles was determined by transmission electron microscopy (TEM) analysis and the average number of crystallites within a particle was estimated. These results have been evaluated to illustrate the formation of single-domain state below a critical value, and the activation volume was derived from time dependent magnetization measurements, aiming to clarify the reversal magnetization process of hard magnetic materials.
20 January 2021 in Journal of Physics D: Applied Physics
Sol–gel synthesis was used in order to obtain nanocrystallites of the SrFe12O19 (SFO) hexaferrite in an efficient and reliable way. By optimizing the initial synthetic conditions, we were able to control the size of the nanoparticles (NPs), at lower annealing temperature. The x-ray powder diffraction, transmission electron microscopy (TEM), and magnetic measurements have demonstrated a significant relation between the morphology, size, and magnetic properties of the nanoscale SFO, revealing a definite dependence on the crystallite size along the c-axis. The obtained NPs appear almost isotropic, in the form of platelets and exhibit similar magnetic performance, in terms of the energy product (BH)MAX, thus, demonstrating the suitability of reducing the annealing temperature without any deterioration in the magnetic properties. Additionally, this work illustrates the feasibility of the sol–gel bottom-up approach to employ magnetic NPs as building-blocks for designing hard/soft exchange-coupled bi-magnetic nanocomposites, combining the high coercivity of a hard phase (SFO) and the high saturation magnetization of a soft phase (CoFe2O4); in this regard, we discuss the tunability of the magnetic anisotropy by symbiotically restricting the growth of both phases.