Prodromos Minaoglou

Mr. Prodromos Minaoglou

Product and Systems Design Engineering, University of Western Macedonia, Kozáni, Dytikí Makedonía, Greece
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 January 2024 in Machines
Verified
Journal Article
Open access
PDF file
PMProdromos Minaoglou
Prodromos Minaoglou
NENIKOLAOS EFKOLIDIS
NIKOLAOS EFKOLIDIS
AMAthanasios Manavis
Athanasios Manavis
Panagiotis KyratsisPanagiotis Kyratsis
Panagiotis Kyratsis
In recent years, the rapid advancement of technology has caused an increase in the development of wearable products. These are portable devices that can be worn by people. The main goal of these products is to improve the quality of life as they focus on the safety, assistance and entertainment of their users. The introduction of many new technologies has allowed these products to evolve into many different fields with multiple uses. The way in which the design of wearable products/devices is approached requires the study and recording of multiple factors so that the final device is functional and efficient for its user. The current research presents an in-depth overview of research studies dealing with the development, design and manufacturing of wearable products/devices and applications/systems in general. More specifically, in this review, a comprehensive classification of wearable products/devices in various sectors and applications was carried out, resulting in the creation of eight different categories. A total of 161 studies from the last 13 years were analyzed and commented on. The findings of this review show that the use of new technologies such as 3D scanning and 3D printing are essential tools for the development of wearable products. In addition, many studies observed the use of various sensors through which multiple signals and data could be recorded. Finally, through the eight categories that the research studies were divided into, two main conclusions emerged. The first conclusion is that 3D printing is a method that was used the most in research. The second conclusion is that most research directions concern the safety of users by using sensors and recording anthropometric dimensions.

25 June 2024 in Electronics
Verified
Journal Article
Open access
PDF file
AMAthanasios Manavis
Athanasios Manavis
PMProdromos Minaoglou
Prodromos Minaoglou
NENIKOLAOS EFKOLIDIS
NIKOLAOS EFKOLIDIS
Panagiotis KyratsisPanagiotis Kyratsis
Panagiotis Kyratsis
Computational design together with the digitization of most fabrication processes play an important role in many research areas. Digital tools such as 3D modeling and computational design have been increasingly used. Computational design combines traditional 3D product design together with programming a general-purpose CAD system in order to promote system integration. In essence, using CAD-based textual or visual programming languages a series of products can be designed with accuracy and take advantage of product customization and automation of downstream applications. The present paper aims at customizing furniture design based on automating both the design and the fabrication procedures. The customer is able to define a series of geometrical characteristics, i.e., width, length, internal dimensions, and various other properties. The outcome consists of automating a great deal of processes, i.e., 3D modeling and assembling, visualization, creating the bill of materials (BOM), producing assembly instructions for the user, drawings and prototyping files, weight estimation.

24 October 2024 in Applied Mechanics
Verified
Journal Article
Open access
PDF file
PMProdromos Minaoglou
Prodromos Minaoglou
ATAnastasios Tzotzis
Anastasios Tzotzis
NENIKOLAOS EFKOLIDIS
NIKOLAOS EFKOLIDIS
Panagiotis KyratsisPanagiotis Kyratsis
Panagiotis Kyratsis
In this study, the effect of certain 3D printing conditions on the tensile strength of 3D-printed specimens was investigated. The printing material was CARBON: PLUS (NEEMA3D™, Athens, Greece), which consists of Polyethylene Terephthalate Glycol (PET-G) reinforced with 20% carbon fiber. All samples were printed with a closed-type, large-format Fused Filament Fabrication (FFF) 3D printer. Before printing the samples, three parameters related to the 3D printing settings were selected in order to vary their values (flow = the flow of the material, wall = the total thickness of the wall, and layer = the thickness of the print layer). Each parameter was given three different values for experimentation. In this study, all 27 possible combinations of variable parameters were fabricated. Each experiment was repeated twice, and from the test results, the maximum tensile strength was obtained for each specimen separately. From the results of the measurements, the most critical parameter appeared to be the height of the layer. The other two variable parameters, the flow and wall, locally affected the strength of the specimens. Later, an empirical model was developed according to the full factorial design for each combination of values. Finally, the R-sq (pred) value achieved was equal to 97.02%, and together with the residual analysis performed, the accuracy of the proposed maximum tensile strength mathematical model was proven.

12 November 2020
Verified
Conference Paper
Closed access
NENIKOLAOS EFKOLIDIS
NIKOLAOS EFKOLIDIS
PMProdromos Minaoglou
Prodromos Minaoglou
KAKyriaki Aidinli
Kyriaki Aidinli
Panagiotis KyratsisPanagiotis Kyratsis
Panagiotis Kyratsis
Nowadays more and more computer-aided technologies and computational techniques are applied to product design. Jewelry belongs to those products. Jewelry is considered as part of human civilization and adopted to human’s needs. In recent years, computational design is applied in order to overcome the limitations of traditional CAD systems, when reaching an increased level of complexity and geometrical controls. Computational design supports the evolution of creative design and develops models as a form of the computational exploration. Furthermore, additive manufacturing (AM) pieces of equipment are widely used to create models and prototype parts in various applications. AM plays an important role, when developing jewelry models, as it is utilized with an aim to produce high-quality models in rather reduced numbers and complex shapes. In the current paper, a computer-based design tool was applied in order to develop algorithms for the generation of new artistic forms for the design of a set of jewelry. Then, Stereolithography (SLA) technique is chosen for the prototype models construction.

17 October 2024 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
PMProdromos Minaoglou
Prodromos Minaoglou
ATAnastasios Tzotzis
Anastasios Tzotzis
NENIKOLAOS EFKOLIDIS
NIKOLAOS EFKOLIDIS
Panagiotis KyratsisPanagiotis Kyratsis
Panagiotis Kyratsis
Artificial intelligence (AI) is a branch of computer science that deals with the adoption of human behavioral elements in computer-based systems. Some of these systems support learning, understanding, making inferences, and adaptability. In recent years, artificial intelligence has brought a rapid technological revolution to many different sectors of industry. It is a tool that can greatly influence the different stages of the design process. In this particular study, the goal was to integrate AI into the design process of a product, and more specifically of a soccer shoe, using additive manufacturing technology as a prototyping method. Different stages to be followed during the design of a product include mind mapping, digital sketches, Computer-Aided Design (CAD), rendering, and prototyping, both digital and physical. By integrating AI tools into the traditional design process, designers can enhance the outcomes of their final products through the use of automation and control systems based on a holistic approach to industrial design. This paper introduces a distinct and innovative design framework that combines the benefits of AI digital applications with the expertise of the designer. The proposed design methodology will be used to create a prototype of the designed soccer shoe using rapid prototyping tools for user feedback on its form. The conclusions of the study are that AI is a tool that can be integrated into the design process of a product, improving it, while at the same time supporting the designers’ creativity and innovation.

3 November 2022
Verified
Conference Paper
Closed access
LFLazaros Firtikiadis
Lazaros Firtikiadis
PMProdromos Minaoglou
Prodromos Minaoglou
AMAthanasios Manavis
Athanasios Manavis
KAKyriaki Aidinli
Kyriaki Aidinli
NENIKOLAOS EFKOLIDIS
NIKOLAOS EFKOLIDIS
Nowadays, the circular economy model is basically built on the efficient use of resources and the maximization of the product’s lifetime as long as possible, by recovering, reusing and recycling existing materials and products. Comparing circular economy with the new trend of customized products, there is an opportunity for the production of personalized products with less associated environmental costs. As a key factor can be considered the 3D printing technology, which is already widely accessible, offering customisable possibilities without expensive tooling based on individual specifications. Furthermore, the opportunity for recycling and degradation of different plastic materials and the creation of a filament for 3D printers has large impact on the product life cycle. The aim of this study is to highlight the management of recyclable plastic by creating new customized products. Souvenir industry has been chosen as a representative example which covers a big number of different products offering simultaneously a mass customized character.