In this paper, the first demonstration of simultaneous UV written Bragg gratings and waveguides in germanium and boron‐doped planar silica is presented using a 5th harmonic solid‐state nanosecond laser operating at 213 nm wavelength. The fabrication of high‐quality gratings by using a high peak power density, yielding sufficient uniformity and without any surface damage is demonstrated. The photosensitivity of the doped silica layer is investigated by measuring the local effective refractive index of the optical modes. The written gratings are used to measure grating refractive index modulation, grating detuning bandwidth and the waveguide propagation loss with a minimum value of 0.28 0.07 dB cm . This paper shows that this new generation of pulsed UV lasers is a promising alternative for conventional longer wavelength CW laser sources used in small spot direct grating writing in doped silica.
Ti3O5 films are deposited with the help of an electron beam evaporator for their applications in metasurfaces. The film of subwavelength (632 nm) thickness is deposited on a silicon substrate and annealed at 400°C. The ellipsometry result shows a high refractive index above 2.5 with the minimum absorption coefficient in the visible region, which is necessary for high efficiency of transparent metasurfaces. Atomic force microscopy analysis is employed to measure the roughness of the as-deposited films. It is seen from micrographs that the deposited films are very smooth with the minimum roughness to prevent scattering and absorption losses for metasurface devices. The absence of grains and cracks can be seen by scanning electron microscope analysis, which is favorable for electron beam lithography. Fourier transform infrared spectroscopy reveals the transmission and reflection obtained from the film deposited on glass substrates. The as-deposited film shows high transmission above 60%, which is in good agreement with metasurfaces.