Rahul Dandautiya

Dr. Rahul Dandautiya

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

31 May 2018 in Waste Management & Research: The Journal for a Sustainable Circular Economy
Verified
Journal Article
Closed access
RDRahul Dandautiya
Rahul Dandautiya
ASAjit Pratap Singh
Ajit Pratap Singh
SKSanghamitra Kundu
Sanghamitra Kundu
The fly ash, generated at the coal-based thermal power plant, is always a cause of concern to environmentalists owing to its adverse impact on air, water and land. There exists a high environmental risk when it is disposed to the environment. Thus, two different type of fly ash samples (FA-1 and FA-2) have been considered in this study to examine the leaching potential of the elements magnesium, aluminium, silicon, calcium, titanium, vanadium, chromium, manganese, iron, nickel, cobalt, copper, zinc, arsenic, selenium, strontium, cadmium, barium and lead for different types of leachant. Toxicity characteristics leaching procedure and ASTM tests have been performed in the laboratory to simulate different natural leaching scenarios. Characterisation of samples have been done through X-ray diffraction and field emission gun scanning electron microscope. The effect of different liquid to solid ratios (i.e. 5, 10, 20 and 50) on the mobilisation of elements has been analysed. The results indicated that the maximum leaching of all elements occurred at a liquid to solid ratio of 5 except for arsenic, barium and silicon. The groundwater analysis has also been done to understand the actual effects of leachate. The elements presenting the highest leachability in the two fly ash samples under all tested conditions were magnesium, aluminium, silicon and calcium. It has been observed that calcium exhibits greater leaching effects than all other constituents. The study presented here has been found very useful for assessing contamination levels in groundwater owing to leaching effects of fly ash under different scenarios, which can be helpful to prevent spreading of the contaminants by efficient management of fly ash.

28 August 2023 in Water
Verified
Journal Article
Open access
PDF file
NSN SHIBANI
N SHIBANI
APAnuvesh Pandey
Anuvesh Pandey
RDRahul Dandautiya
Rahul Dandautiya
MHMurtaza Hasan
Murtaza Hasan
MKMohammad Amir khan
Mohammad Amir khan
OQObaid Qamar
Obaid Qamar
With increasing population and industrialization, the water quality of freshwater sources like rivers, lakes, and ponds is becoming increasingly degraded. Most of the rivers in India are becoming polluted, including the Godavari. With the construction of dams, new industries and unsustainable agricultural practices in the Godavari basin, the water characteristics are degrading spatially and temporally. The present study emphasizes the analysis of water quality parameters like temperature, pH, Dissolved Oxygen (DO), conductivity, Biological Oxygen Demand (BOD), nitrate, and faecal coliform concentration in the Godavari basin. This was achieved by analysis of data taken from the Central Pollution Control Board, India (CPCB) for 21 stations around the Godavari basin over a span of five years from 2015 to 2019. The Pearson Correlation coefficient for the water quality parameters was assessed to study the relationship among the parameters. Variation in the water quality parameter is observed from the graphs for each station for respective years. It was found that conductivity and DO, temperature and pH and DO and faecal coliform are negatively correlated. It was also observed that DO has a negative correlation with pH, BOD and faecal coliform, indicating the utilization of dissolved oxygen at higher rates due to increasing degradation of organic matter by aerobic microorganisms in the river. One-way ANOVA was applied to find out significant temporal variations and it was observed that temperature, pH, and faecal coliform level had significantly changed the overdue course of time (F(4, 115) = 2.451, p < 0.05). The obtained results from the analysis indicate that the selected water quality parameters have varied significantly spatially, whereas temporally, according to the ANOVA coefficient, only temperature, pH and faecal coliform had shown significant differences during the selected timeframe. Hence, the present study highlighted the deteriorating water quality of the Godavari River over time.

18 June 2019 in Environment, Development and Sustainability
Verified
Journal Article
Closed access
PDF file
GGGourav Gill
Gourav Gill
RMRavi Kant Mittal
Ravi Kant Mittal
RDRahul Dandautiya
Rahul Dandautiya
NPNilesh Purohit
Nilesh Purohit

8 April 2024 in E3S Web of Conferences
Verified
Conference Paper
Open access
PDF file
GKGurpreet Kaur
Gurpreet Kaur
RDRahul Dandautiya
Rahul Dandautiya
This article highlights the possible origin, occurrence, and environmental pathways of microplastics (MPs) in the synthetic textile sector. It focused on comprehensive knowledge of the MP in industry, emphasizing the importance of an integrated approach to addressing its extensive consequences. The emission of MPs during the production of textiles including spinning, weaving, dyeing, printing, or finishing. It found that many small fragments, microfibres, sequins, buttons, foams, and other packaging materials made up of plastics such as polyester, polyamide, polyethylene terephthalate, polyacrylonitrile, polyethylene, and many more are weathered from large pieces of clothes and yarns by mechanical action or other degradation methods. In addition, several sources and processes of production that are accountable to MPs have been discussed in the synthetic textile industry. Finally, the effects of MPFs (microplastic fibres) on the environment and, more specifically, on humans were put forth.

4 November 2020 in KSCE Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
GGGourav Gill
Gourav Gill
RMRavi Kant Mittal
Ravi Kant Mittal
RDRahul Dandautiya
Rahul Dandautiya
The slag and waste tires are among the major wastes associated with the mining and automobile sectors, respectively. The disposal of such large quantities of waste requires immediate attention. This manuscript focusses on the application of copper slag under unreinforced and reinforced conditions as a load-bearing filling material in shallow foundations. For this purpose, model footing tests were conducted on copper slag under central and eccentric-inclined loading. The locally available sand was used as a reference. The parameters studied included the placement density, type of loading, tire chip content, and depth of reinforced zone. The pressure settlement behaviour of the copper slag was superior to local sand under central vertical as well as under eccentric inclined loading conditions. Quantitively, the bearing capacity increased by up to 21 times, when compared to the locally available sand. Furthermore, when mixed with tire chips, the bearing capacity of the copper slag increased by up to 1.41 times to that of the unreinforced case. The leaching potential of the copper slag was evaluated using toxicity characteristic leaching procedure tests. It was observed that the concentrations of the leached elements were well below the regulatory limits prescribed by the US, EPA. Henceforth, it can be concluded that the use of copper slag as a load-bearing filling material not only prevents the disposal of this waste into valuable land but also works as a sustainable alternative to prevalent ground improvement methods.