Alfredo Restuccia Garofalo

Dr. Alfredo Restuccia Garofalo

Department of Civil, Environmental, Land, Building Engineering and Chemistry (DICATECh), Polytechnic University of Bari, Bari, Puglia, Italy
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 February 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Massimiliano PepeMassimiliano Pepe
Massimiliano Pepe
Domenica CostantinoDomenica Costantino
Domenica Costantino
Alfredo Restuccia GarofaloAlfredo Restuccia Garofalo
Alfredo Restuccia Garofalo
The aim of this work is to identify an efficient pipeline in order to build HBIM (heritage building information modelling) and create digital models to be used in structural analysis. To build accurate 3D models it is first necessary to perform a geomatics survey. This means performing a survey with active or passive sensors and, subsequently, accomplishing adequate post-processing of the data. In this way, it is possible to obtain a 3D point cloud of the structure under investigation. The next step, known as “scan-to-BIM (building information modelling)”, has led to the creation of an appropriate methodology that involved the use of Rhinoceros software and a few tools developed within this environment. Once the 3D model is obtained, the last step is the implementation of the structure in FEM (finite element method) and/or in HBIM software. In this paper, two case studies involving structures belonging to the cultural heritage (CH) environment are analysed: a historical church and a masonry bridge. In particular, for both case studies, the different phases were described involving the construction of the point cloud and, subsequently, the construction of a 3D model. This model is suitable both for structural analysis and for the parameterization of rheological and geometric information of each single element of the structure.

28 January 2021 in Applied Geomatics
Verified
Journal Article
Open access
PDF file
Domenica CostantinoDomenica Costantino
Domenica Costantino
Massimiliano PepeMassimiliano Pepe
Massimiliano Pepe
Alfredo Restuccia GarofaloAlfredo Restuccia Garofalo
Alfredo Restuccia Garofalo
The management of Cultural Heritage (CH) requires increasingly efficient, simple and shareable tools, methods and knowledge. In this environment, a suitable procedure was developed to transform the point cloud, generated by geomatics surveys, into parameterized objects. In order to obtain an object with precise geometric and physical characteristics, a three-dimensional modelling software (Rhinoceros) was used. This software, using the tools and specific plugins, has allowed the parameterization of objects. In particular, the use of the Grasshopper plugin allowed a two-way transformation of the objects between the modelling software and the BIM software (Revit). As a result, any changes to the model made in Rhinoceros were automatically made in Revit and vice versa. The paper shows the potentiality, simplicity and efficiency of the developed method in order to perform the scan-to-HBIM process. This approach was applied to a religious building, located in Italy, belonging to the Cultural Heritage.

29 January 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Vincenzo Saverio AlfioVincenzo Saverio Alfio
Vincenzo Saverio Alfio
Domenica CostantinoDomenica Costantino
Domenica Costantino
Massimiliano PepeMassimiliano Pepe
Massimiliano Pepe
Alfredo Restuccia GarofaloAlfredo Restuccia Garofalo
Alfredo Restuccia Garofalo
Artistic, architectural and Cultural Heritage (CH) structures are often exposed to a high risk of damage caused by seismic events, natural disasters and more by negligence and poor state of preservation and conservation; the use of a series of technologies, based on digital acquisition and high-level data processing, allows the realisation of a three-dimensional model of high detail. In order to preserve structures of particular historical and architectural value, it is necessary to assess their structural stability. In addition, many structures, such as statues, have rather complex geometries. Therefore, it is necessary to identify a methodology able to transform the point cloud generated through a geomatics approach into a model suitable for FEM (Finite Element Analysis) analysis. This process, known as Scan to FEM, is addressed in this paper. The paper shows the case study of the “Colossus of Barletta”, a bronze statue dating back to the 5th century A.D. located in the city of Barletta, Italy. To analyse this structure, a suitable methodology has been developed which is based on the optimisation of the surface model of the structure; in this way, it is possible to obtain an efficient transformation from a digital photogrammetric model with complex geometry into a model suitable for structural finite element analysis. The digital photogrammetry technique was applied for the survey of the structure, which allowed us to obtain a very high-resolution dense point cloud and a geometrically accurate three-dimensional mesh model, i.e., in a TIN (Triangulated Irregular Network) model. Subsequently, the TIN was transformed into a quad mesh model (identifying a suitable reduction value) and finally into NURBS (Non-Uniform Rational Basis-Splines) to be optimised and imported into a finite element calculation software. This geomatics approach has validated an efficient Scan to FEM process; in fact, thanks to this methodology, it is possible to elaborate three-dimensional models with complex geometry and draw a series of considerations related to structural behaviour or specific restoration interventions.

Verified
Journal Article
Open access
PDF file
Massimiliano PepeMassimiliano Pepe
Massimiliano Pepe
Domenica CostantinoDomenica Costantino
Domenica Costantino
Vincenzo Saverio AlfioVincenzo Saverio Alfio
Vincenzo Saverio Alfio
MAMaria Giuseppa Angelini
Maria Giuseppa Angelini
Alfredo Restuccia GarofaloAlfredo Restuccia Garofalo
Alfredo Restuccia Garofalo
The aim of this article is to provide a dedicated approach to the realisation of a CityGML model for the valorisation and the conservation of existing cultural heritage. In particular, for the ancient city of Taranto (Italy), several levels of details (LODs) have been built. CityGML models in LOD1 for the most representative periods were realised, which were characterised by urban changes from the mid-1800s until today. To achieve this aim, great importance was devoted to the process of integration of the different file formats. A geographic information system (GIS) approach has been put in place for the construction of the CityGML model in LOD1. In addition, the study also focused on the realisation of a CityGML model in LOD3 of a bridge of a particular historical and architectural interest, called “Ponte di Porta Napoli”, also situated in the city of Taranto. In the latter case, the CityGML model was realised starting from the geomatics survey. Therefore, the project structured in this way represents an important tool for the sharing of (georeferenced) territorial information. The CityGML models represent a valid support for spatial planning processes and measures for the protection, monitoring and conservation of urban elements.

2 May 2024 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Massimiliano PepeMassimiliano Pepe
Massimiliano Pepe
Alfredo Restuccia GarofaloAlfredo Restuccia Garofalo
Alfredo Restuccia Garofalo
Domenica CostantinoDomenica Costantino
Domenica Costantino
FTFederica Francesca Tana
Federica Francesca Tana
DPDonato Palumbo
Donato Palumbo
ESENRICO SPACONE
ENRICO SPACONE
The aim of the paper is to identify an efficient method for transforming the point cloud into parametric objects in the fields of architecture, engineering and construction by four main steps: 3D survey of the structure under investigation, generation of a new point cloud based on feature extraction and identification of suitable threshold values, geometry reconstruction by semi-automatic process performed in Rhinoceros/Grasshopper and BIM implementation. The developed method made it possible to quickly obtain geometries that were very realistic to the original ones as shown in the case study described in the paper. In particular, the application of ShrinkWrap algorithm on the simplify point cloud allowed us to obtain a polygonal mesh model without errors such as holes, non-manifold surfaces, compenetrating surfaces, etc.

5 May 2026 in Buildings
Verified
Journal Article
Open access
PDF file
Massimiliano PepeMassimiliano Pepe
Massimiliano Pepe
DPDonato Palumbo
Donato Palumbo
Alfredo Restuccia GarofaloAlfredo Restuccia Garofalo
Alfredo Restuccia Garofalo
Vincenzo Saverio AlfioVincenzo Saverio Alfio
Vincenzo Saverio Alfio
ADAhmed Kamal Hamed Dewedar
Ahmed Kamal Hamed Dewedar
Domenica CostantinoDomenica Costantino
Domenica Costantino
This paper presents a computationally feasible/time-effective Scan-to-BrIM workflow for generating a highly detailed digital model of a complex steel pedestrian bridge. The proposed methodology integrates rapid and accurate point cloud acquisition with advanced parametric modelling and structural information management. First, a high-resolution point cloud is produced using a fast survey strategy that ensures the geometric precision required for a faithful representation of the existing structure. Second, the point cloud is processed in Rhinoceros/Grasshopper, where a custom Python (version 3.13) algorithm automatically detects and generates reference planes containing the structural components, enabling the creation of a consistent and fully parametric BrIM model. The latter approach includes metric normalization, voxel-based downsampling, reliable under tested conditions ground and outlier removal, and PCA (Principal Component Analysis)-based reorientation, followed by guided slicing of the point cloud and projection of each slice onto its section plane. The proposed workflow achieved a geometric RMSE of 2.5 mm with a total processing time of 7.3 h. The resulting parametric model achieves geometric consistency with the source point cloud within an operational tolerance range of approximately 5–10 mm, in line with the requirements of structural applications. Finally, the model is organised and managed within the BrIM environment and then transferred to a downstream FEM environment for preliminary structural application. The workflow is tested on a case study of a 40-m steel pedestrian bridge located in central Italy. Results demonstrate that the integrated approach provides a reproducible and semi-automated solution that reduces manual intervention in Scan-to-BrIM processes for producing accurate parametric models of steel pedestrian bridges, supporting structural assessment, asset management, and future maintenance strategies.