Reza Jafari

Mr. Reza Jafari

Tampere University, Tampere, Pirkanmaa, Finland

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

2 January 2018 in Journal of Thermal Spray Technology
Verified
Journal Article
Open access
PDF file
RJReza Jafari
Reza Jafari
Esmaeil SadeghiEsmaeil Sadeghi
Esmaeil Sadeghi
TFTaghi Shahrabi Farahani
Taghi Shahrabi Farahani
MHMatti Huhtakangas
Matti Huhtakangas
NMNicolaie Markocsan
Nicolaie Markocsan
SJShrikant Joshi
Shrikant Joshi
KCl-induced high-temperature corrosion behavior of four HVAF-sprayed Ni-based coatings (Ni21Cr, Ni5Al, Ni21Cr7Al1Y and Ni21Cr9Mo) under KCl deposit has been investigated in ambient air at 600 °C up to 168 h. The coatings were deposited onto 16Mo3 steel—a widely used boiler tube material. Uncoated substrate, 304L and Sanicro 25 were used as reference materials in the test environment. SEM/EDS and XRD techniques were utilized to characterize the as-sprayed and exposed samples. The results showed that the small addition of KCl significantly accelerated degradation to the coatings. All coatings provided better corrosion resistance compared to the reference materials. The alumina-forming Ni5Al coating under KCl deposit was capable of forming a more protective oxide scale compared to the chromia-forming coatings as penetration of Cl through diffusion paths was hindered. Both active corrosion and chromate formation mechanisms were found to be responsible for the corrosion damages. The corrosion resistance of the coatings based on the microstructure analysis and kinetics had the following ranking (from the best to worst): Ni5Al > Ni21Cr > Ni21Cr7Al1Y > Ni21Cr9Mo.

1 October 2020 in Materials Characterization
Verified
Journal Article
Open access
Esmaeil SadeghiEsmaeil Sadeghi
Esmaeil Sadeghi
PPPrabhat Pant
Prabhat Pant
RJReza Jafari
Reza Jafari
RPRu Lin Peng
Ru Lin Peng
PKParia Karimi
Paria Karimi

25 March 2024 in Journal of Thermal Spray Technology
Verified
Journal Article
Open access
PDF file
RJReza Jafari
Reza Jafari
JCJan Cizek
Jan Cizek
FLFrantisek Lukac
Frantisek Lukac
LCLadislav Cvrcek
Ladislav Cvrcek
MBMatej Buril
Matej Buril
Heli KoivuluotoHeli Koivuluoto
Heli Koivuluoto
Cold spray (CS) technology has proven a great potential in the production of composite coatings, enabling the production of materials with superior qualities such as enhanced tribological behavior. This study aims to investigate the tribological properties of CS Al-based composite coatings reinforced by quasicrystalline (QC) particles. Two different Al alloys were used as the matrix, AA 6061 and AA 2024, and mixed with Al-based QC particles (Al-Cr-Fe-Cu) at different Al/QC ratios. A room-temperature ball-on-disc test was then used to evaluate the wear resistance of the composite CS coatings in air and compared to those of the non-reinforced Al alloy CS coatings as well as a cast counterpart (AA 6061-T6). We have demonstrated that CS could be employed to produce thick and dense Al-QC composites that can retain up to about 50 wt.% QC reinforcement in the structure. The incorporation of the QC particles increased the wear resistance by a factor of 7.

1 December 2020 in Surface and Coatings Technology
Verified
Journal Article
Open access
MAMobin Alehojat
Mobin Alehojat
RJReza Jafari
Reza Jafari
PKParia Karimi
Paria Karimi
Esmaeil SadeghiEsmaeil Sadeghi
Esmaeil Sadeghi

4 January 2023 in Journal of Thermal Spray Technology
Verified
Journal Article
Open access
PDF file
RJReza Jafari
Reza Jafari
JKJarkko Kiilakoski
Jarkko Kiilakoski
MHMari Honkanen
Mari Honkanen
MVMinnamari Vippola
Minnamari Vippola
Heli KoivuluotoHeli Koivuluoto
Heli Koivuluoto
Coating design is an efficient strategy to engineer wettability of surfaces and adjustment of the functionality to the necessities in industrial sectors. The current study reveals the feasibility of functional aluminum/quasicrystalline (Al-QC) composite coatings fabrication by cold spray technology. A commercially available Al-based quasicrystalline powder (Al-Cr-Fe-Cu) was combined with aluminum alloy (Al6061) feedstock materials to make coatings with various compositions. A set of cold spray process parameters was employed to deposit composite coatings with different QC-Al ratios and Al6061 coatings as counterparts. The wettability of the coating surfaces was measured by static water droplet contact angles using a droplet shape analyzer and investigation of the dynamic of water droplet impact by high-speed imaging. Through microstructural studies, the Al-QC composites revealed dense structure, well-integrated and adherent deposits, providing structural reliability and enhanced hydrophobic behavior. In the last step of this work, composite coatings were deposited over eroded cold-sprayed Al6061 and a selected composite to demonstrate the feasibility of repairing the damaged part and function restoring. The results and approach used in this work provide understanding of cold-sprayed Al-QC composite coatings manufacturing and their wetting behavior state for cross-field applications.