Rokeya zaman Sarah

Ms. Rokeya zaman Sarah

Sustainable Product Design and Innovation, Keene State College, Keene, New Hampshire, USA

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 January 2025 in Gels
Verified
Journal Article
Open access
PDF file
Rokeya zaman SarahRokeya zaman Sarah
Rokeya zaman Sarah
KSKory Schimmelpfennig
Kory Schimmelpfennig
RRRiley Rohauer
Riley Rohauer
CLChristopher Lewis
Christopher Lewis
SLShah Limon
Shah Limon
MD AHASAN HABIBMD AHASAN HABIB
MD AHASAN HABIB
The field of tissue engineering has made significant advancements with extrusion-based bioprinting, which uses shear forces to create intricate tissue structures. However, the success of this method heavily relies on the rheological properties of bioinks. Most bioinks use shear-thinning. While a few component-based efforts have been reported to predict the viscosity of bioinks, the impact of shear rate has been vastly ignored. To address this gap, our research presents predictive models using machine learning (ML) algorithms, including polynomial fit (PF), decision tree (DT), and random forest (RF), to estimate bioink viscosity based on component weights and shear rate. We utilized novel bioinks composed of varying percentages of alginate (2–5.25%), gelatin (2–5.25%), and TEMPO-Nano fibrillated cellulose (0.5–1%) at shear rates from 0.1 to 100 s−1. Our study analyzed 169 rheological measurements using 80% training and 20% validation data. The results, based on the coefficient of determination (R2) and mean absolute error (MAE), showed that the RF algorithm-based model performed best: [(R2, MAE) RF = (0.99, 0.09), (R2, MAE) PF = (0.95, 0.28), (R2, MAE) DT = (0.98, 0.13)]. These predictive models serve as valuable tools for bioink formulation optimization, allowing researchers to determine effective viscosities without extensive experimental trials to accelerate tissue engineering.

31 October 2023 in Journal of Manufacturing Science and Engineering
Verified
Journal Article
Closed access
PDF file
AHAhasan Habib
Ahasan Habib
CQConnor Quigley
Connor Quigley
Rokeya zaman SarahRokeya zaman Sarah
Rokeya zaman Sarah
WHWarren Hurd
Warren Hurd
SCScott Clark
Scott Clark
The field of 3D bioprinting is rapidly expanding as researchers strive to create functional tissues for medical and pharmaceutical purposes. The ability to print multiple materials, each containing various living cells, brings us closer to achieving tissue regeneration. Deliberately transitioning between different material types encapsulating distinct cells and extruding through a single outlet, can lead to the achievement of user-defined material distribution, which is still challenging. In a previous study, we designed a Y-shaped nozzle connector system that allowed for continuous deposition of multiple materials through a single outlet. This system was made of plastic and had a fixed switching angle, rendering it suitable for a single use. In this article, we present the updated version of our nozzle system, which includes a range of angles (30 deg, 45 deg, 60 deg, and 90 deg) between the two materials. Changing the angles helps us figure out how that affects the control of backflow and minimizes the overall material switching time in the nozzle. We used stainless steel as the fabrication material and recorded the overall material switching time, comparing the effects of the various angles. Our previously developed hybrid hydrogel, which comprised 4% alginate and 4% carboxymethyl cellulose (CMC), was used as a test material to flow through the nozzle system. The in-house fabricated nozzle connectors are reusable, sterile, and easy to clean, ensuring a smooth material transition and flow. Our proposition can offer to achieve user-defined material distribution across a given region with appropriate selection of rheology and printing process parameters.

16 July 2025 in Journal of Manufacturing Science and Engineering
Verified
Journal Article
Closed access
Rokeya zaman SarahRokeya zaman Sarah
Rokeya zaman Sarah
RRRiley Rohauer
Riley Rohauer
KSKory Schimmelpfennig
Kory Schimmelpfennig
SLShah Limon
Shah Limon
CLChristopher Lewis
Christopher Lewis
MD AHASAN HABIBMD AHASAN HABIB
MD AHASAN HABIB
The field of tissue engineering has significantly advanced with the development of extrusion-based bioprinting. This technique utilizes shear forces to generate filaments for fabricating intricate structures. The printability and structural integrity of bioprinted constructs rely heavily on the rheological properties of bioinks, particularly viscosity, which varies with the shear rate for non-Newtonian materials. Since the shear rate at the nozzle tip fluctuates during extrusion, it is essential to understand how bioink composition influences this behavior. This study investigates the rheological behavior of ALGEC bioinks, a novel formulation composed of ALginate, GElatin, and 2,2,6,6-Tetramethylpiperidine 1-oxyl (TEMPO)-oxidized nanofibrillated cellulose (TO-NFC). The bioinks were prepared with varying concentrations: alginate (0–5.25%), gelatin (0–5.25%), and TO-NFC (0–1.5%), with a maximum total solid content of 8%. Viscosity was conducted over shear rates ranging from 0.1 to 100 s−1, with 252 viscosity data points used 80% for training and 20% for validation. To predict viscosity, polynomial fit and interaction-based multiple regression models were developed. Experimental data were used to estimate viscosity based on bioink composition and shear rate, with the best-performing model achieving an R2 of 0.98 and an mean absolute error (MAE) of 0.12. These predictive models were further utilized to optimize ALGEC formulations to achieve targeted viscosity ranges. Constructs were bioprinted using a random and an optimized composition, demonstrating the effectiveness of model-driven bioink optimization. These findings enhance tissue engineering by improving bioink printability, leading to structurally stable bioprinted constructs for regenerative medicine applications.

7 May 2025 in Journal of Manufacturing Science and Engineering
Verified
Journal Article
Closed access
SLShah Limon
Shah Limon
Rokeya zaman SarahRokeya zaman Sarah
Rokeya zaman Sarah
MD AHASAN HABIBMD AHASAN HABIB
MD AHASAN HABIB
Among various 3D bioprinting methods, extrusion-based bioprinting stands out for its ability to maintain high cell viability and create intricate scaffold structures. However, working with synthetic polymers or natural shear-thinning hydrogels requires precise control of rheological properties, such as viscosity, to ensure scaffold stability while supporting living cells. Traditionally, researchers address these challenges through extensive experimentation, separately optimizing material properties and bioprinting performance. This process, though effective, is often slow and resource-heavy. To streamline this workflow, computational approaches like machine learning are proving invaluable. In this study, a decision tree model was developed to predict the viscosity of bioinks across various compositions with high accuracy, significantly reducing the trial-and-error phase of experimentation. Once viscosity is optimized, k-means clustering is applied to analyze and group scaffolds based on their mechanical and biological properties. This clustering technique identifies the optimal characteristics for scaffolds, balancing structural fidelity and cell viability. The integration of these computational tools allows researchers to optimize bioink formulations and printing parameters more efficiently. By reducing experimental workload and improving precision, this approach not only accelerates the bioprinting process but also ensures that the resulting scaffolds meet the required mechanical integrity and provide a conducive environment for cell growth. This study represents a significant step forward in tissue engineering, offering a robust, data-driven pathway to enhance both the efficiency and quality of 3D bioprinted constructs.

Verified
Journal Article
Open access
PDF file
RRRiley Rohauer
Riley Rohauer
KSKory Schimmelpfennig
Kory Schimmelpfennig
PWPerrin Woods
Perrin Woods
Rokeya zaman SarahRokeya zaman Sarah
Rokeya zaman Sarah
MD AHASAN HABIBMD AHASAN HABIB
MD AHASAN HABIB
CLChristopher Lewis
Christopher Lewis
This work characterizes hybrid hydrogels prepared via the combination of natural and synthetic polymers. By incorporating a biocompatible compound, poly(ethylene glycol) diacrylate (PEGDA, Mn = 400), into alginate and carboxymethyl cellulose (CMC)-based hydrogels, the in situ UV crosslinking of these materials was assessed. A custom direct-write (DW) 3D bioprinter was utilized to prepare hybrid hydrogel constructs and scaffolds. A control sample, which consisted of 4% w/v alginate and 4% w/v CMC, was prepared and evaluated in addition to three PEGDA (4.5, 6.5, and 10% w/v)-containing hybrid hydrogels. Rotational rheology was utilized to evaluate the thixotropic behavior of these materials. Filament fusion tests were employed to generate bilayer constructs of various pore sizes, providing metrics for the printability and diffusion rate of hydrogels post-extrusion. Printability indicates the shape fidelity of pore geometry, whereas diffusion rate represents material spreading after deposition. Curing kinetics of PEGDA-containing hydrogels were evaluated using photo-Differential Scanning Calorimetry (DSC) and photorheology. The Kamal model was fitted to photo-DSC results, enabling an assessment and comparison of the curing kinetics for PEGDA-containing hydrogels. Photorheological results highlight the increase in hydrogel stiffness concomitant with PEGDA content. The range of obtained complex moduli (G*) provides utility for the development of brain, kidney, and heart tissue (620–4600 Pa). The in situ UV irradiation of PEGDA-containing hydrogels improved the shape fidelity of printed bilayers and decreased filament diffusion rates. In situ UV irradiation enabled 10-layer scaffolds with 1 × 1 mm pore sizes to be printed. Ultimately, this study highlights the utility of PEGDA-containing hybrid hydrogels for high-resolution DW 3D bioprinting and potential application toward customizable tissue analogs.

29 October 2024 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
Rokeya zaman SarahRokeya zaman Sarah
Rokeya zaman Sarah
BSBenjamin Szum
Benjamin Szum
MD AHASAN HABIBMD AHASAN HABIB
MD AHASAN HABIB
This study explored extrusion-based 3D bioprinting as a method for depositing cell-laden bio-ink to create well-defined scaffolds for tissue regeneration. Natural hydrogels, known for their biocompatibility and low cell toxicity, were favored for bio-ink formulation in this process. However, their limited mechanical strength poses a challenge to maintaining structural integrity. To address this, the rheological properties of hybrid hydrogels containing cellulose-derived nanofiber (TONFC) at concentrations between 0.5% and 1.0%, along with alginate and gelatin at levels between 2% and 5%, were tested in this study. A total of eight formulations was created by adjusting the proportions of alginate, TO-NFC, and gelatin, resulting in a combined solid content of 8%. Various rheological properties, such as the flow behavior, recovery rate, and linear viscoelastic range, were analyzed. Bi-layer scaffolds were 3D printed with various compositions and the shape fidelity was investigated. Human mesenchymal stem cells (hMSCs) were mixed to prepare bio-ink and cell survivability was observed after 7 incubation days. The ability to control 3D printability and the favorable survival of cells make nanofiber-infused alginate–gelatin a promising option for creating precisely shaped scaffolds using the 3D bio-printing process.