The acidity characteristics of zeolite are highly significant, and understanding the acidic properties is essential for developing new types of zeolite catalysts. Zeolite membranes were synthesized using metakaolin, sodium hydroxide, and alumina with a molar ratio of 6Al2Si2O7:12NaOH:2Al2O3 as the starting ingredients. X-ray diffraction, scanning electron microscopy, and infrared spectroscopy were used for this study. N2 adsorption measurements determined the surface areas of the SOD zeolite membrane (115 m2/g) and the LTA membrane (150 m2/g). The units of absorbed water vapor were 40 and 60 wt% for the SOD membrane and the LTA membrane, respectively. The strength and number of acid sites of the synthesized LTA and SOD zeolite membranes were determined by temperature-programmed desorption of ammonia. As a result, the value of the total acidity of the LTA zeolite membrane is in the range of 0.08 × 1019 units/m2 while that of the sodalite membrane is an order of magnitude lower and is 0.006 × 1019 units/m2. The apparent activation energy values for desorption of ammonia from LTA and SOD zeolite membranes were calculated using data on the kinetics of desorption of ammonia at different heating rates. It was found that at temperatures below 250 °C, the degree of conversion of the activation energy values is no more than 35 kJ/mol, which corresponds to the desorption of physically bound ammonia. An increase in the activation values up to 70 kJ/mol (for SOD) and up to 80 kJ/mol (for LTA) is associated with the desorption of chemically bound ammonia from the samples.
Cobalt ferrite (CoFe2O4) nanoparticles were synthesized and investigated as a catalyst in the reaction of nitrous oxide (N2O) decomposition. Cobalt ferrite was synthesized by solid–phase interaction at 1100 °C and by preliminary mechanochemical activation in a roller-ring vibrating mill at 400 °C. The nanoparticles were characterized by X-ray diffraction (XRD), synchronous thermal analysis (TG and DSC) and scanning electron microscopy (SEM). A low-temperature nitrogen adsorption/desorption test was used to evaluate the catalytic activity of the cobalt ferrite nanoparticles. Correlations between the structure and catalytic properties of the catalysts are reported. The highest catalytic activity of CoFe2O4 in the reaction of nitrous oxide decomposition was 98.1% at 475 °C for cobalt ferrite obtained by mechanochemical activation.
1 March 2011 in Theoretical and Experimental Chemistry
The mechanochemical synthesis of aluminum oxides and hydroxides is studied by means of X-ray diffraction, volumetry, and thermogravimetry. Kinetic aspects of metallic aluminum powder oxidation...
1 October 2014 in Russian Journal of Applied Chemistry
X-ray phase analysis, thermogravimetry, and volumometry were used to study the mechanochemical synthesis of zinc oxide. The conversion of metallic zinc was calculated in relation to the time and...
1 January 2017 in Russian Journal of Physical Chemistry A
The properties of a nickel catalyst obtained by treatment of nickel–aluminum alloy with sodium hydroxide in the presence of H2O2 and additionally stabilized with increased pressure were studied. Additional stabilization decreased the catalyst activity by 25%, but gave a more distinct picture for an XRD analysis of the active catalyst surface and decreased the time of deactivation of the dehydrated catalyst with air oxygen. The catalyst stabilization was explained by the displacement of water, decrease in the pore size, and surface inhomogeneity.