To improve the performance of 3D LiDAR imaging and reduce the negative effects of interference fringes on polarization modulation of electro-optical crystals, a calibration algorithm based on polarization modulation principle was proposed in this letter. The reflect light of targets is received by the system, modulated by an electro-optical crystal, then divided into two complementary light beams after passing through polarization beam splitting (PBS), and finally received by two electron-multiplying CCDs (EMCCDs). The depth map and intensity image can be reconstructed by adding the two modulated images. However, the cone interference effect of the electro-optic crystal affects the modulation of the polarized light, resulting in the distance error. By fitting the curve of grayscale ratio of each pixel acquired by two EMCCDs with the changing of voltage, the actual range can be calculated by the light intensity corresponding to the accurate polarization modulation. Ultimately, we found that the algorithm showed outstanding performance on high-precision imaging with an error less than 0.1m in a wide field-of-view of 0.9 mrad.
To implement target point cloud segmentation for a polarization-modulated 3D imaging system in practical projects, an efficient segmentation concept of multi-dimensional information fusion is designed. As the electron multiplier charge coupled device (EMCCD) camera can only acquire the gray image, but has no ability for time resolution owing to the time integration mechanism, large diameter electro-optic modulators (EOM) are used to provide time resolution for the EMCCD cameras to obtain the polarization-modulated images, from which a 3D image can also be simultaneously reconstructed. According to the characteristics of the EMCCD camera’s plane array imaging, the point-to-point mapping relationship between the gray image pixels and point cloud data coordinates is established. The target’s pixel coordinate position obtained by image segmentation is mapped to 3D point cloud data to get the segmented target point cloud data. On the basis of the specific environment characteristics of the experiment, the maximum entropy test method is applied to the target segmentation of the gray image, and the image morphological erosion algorithm is used to improve the segmentation accuracy. This method solves the problem that conventional point clouds’ segmentation methods cannot effectively segment irregular objects or closely bound objects. Meanwhile, it has strong robustness and stability in the presence of noise, and reduces the computational complexity and data volume. The experimental results show that this method is better for the segmentation of the target in the actual environment, and can avoid the over-segmentation and under-segmentation to some extent. This paper illustrates the potential and feasibility of the segmentation method based on this system in real-time data processing.
High-resolution 3D visualization of dynamic environments is critical for applications such as remote sensing. Traditional 3D imaging systems, such as lidar, rely on avalanche photodiode (APD) arrays to determine the flight time of light for each scene pixel. In this context, we introduce and demonstrate a high-resolution 3D imaging approach leveraging an Electron Multiplying Charge Coupled Device (EMCCD). This sensor’s low bandwidth properties allow for the use of electro-optic modulators to achieve both temporal resolution and rapid shuttering at sub-nanosecond speeds. This enables range-gated 3D imaging, which significantly enhances the signal-to-noise ratio (SNR) within our proposed framework. By employing a dual EMCCD setup, it is possible to reconstruct both a depth image and a grayscale image from a single raw data frame, thereby improving dynamic imaging capabilities, irrespective of object or platform movement. Additionally, the adaptive gate-opening range technology can further refine the range resolution of specific scene objects to as low as 10 cm.