The biomedical field still requires composite materials for medical devices and tissue engineering model design. As part of the pursuit of non-animal and non-proteic scaffolds, we propose here a cellulose-based material. In this study, 9%, 18% and 36% dialdehyde-functionalized microcrystalline celluloses (DAC) were synthesized by sodium periodate oxidation. The latter was subsequently coupled to PVA at ratios 1:2, 1:1 and 2:1 by dissolving in N-methyl pyrrolidone and lithium chloride. Moulding and successive rehydration in ethanol and water baths formed soft hydrogels. While oxidation effectiveness was confirmed by dialdehyde content determination for all DAC, we observed increasing hydrolysis associated with particle fragmentation. Imaging, FTIR and XDR analysis highlighted an intertwined DAC/PVA network mainly supported by electrostatic interactions, hemiacetal and acetal linkage. To meet tissue engineering requirements, an interconnected porosity was optimized using 0–50 µm salts. While the role of DAC in strengthening the hydrogel was identified, the oxidation ratio of DAC showed no distinct trend. DAC 9% material exhibited the highest indirect and direct cytocompatibility creating spheroid-like structures. DAC/PVA hydrogels showed physical stability and acceptability in vivo that led us to propose our DAC 9%/PVA based material for soft tissue graft application.
Faced with growing global demand for new potent, bio-based, biocompatible elastomers, the present study reports the solvent-free production of 13 pure and derived poly(glycerol-co-diacid) composite sheets exclusively using itaconic acid, sebacic acid, and 2,5-furandicarboxylic acid (FDCA) with glycerol. Herein, modified melt polycondensation and Co(II)-catalyzed polytransesterification were employed to produce all exploitable prepolymers, enabling the easy and rapid manufacturing of elastomer sheets by extrusion. Most of our samples were loaded with 4 wt% of various additives such as natural polysaccharides, synthetic polymers, and/or 25 wt% sodium chloride as porogen agents. The removal of unreacted monomers and acidic short oligomers was carried out by means of washing with NaHCO3 aqueous solution, and pH monitoring was conducted until efficient sheet surface neutralization. For each sheet, their surface morphologies were observed by Field-emission microscopy, and DSC was used to confirm their amorphous nature and the impact of the introduction of every additive. The chemical constitution of the materials was monitored by FTIR. Then, cytotoxicity tests were performed for six of our most promising candidates. Finally, we achieved the production of two different types of extrusion-made PGS elastomers loaded with 10 wt% PANI particulates and 4 wt% microcrystalline cellulose for adding potential electroconductivity and stability to the material, respectively. In a preliminary experiment, we showed the effectiveness of these materials as performant, time-dependent electric pH sensors when immersed in a persistent HCl atmosphere.
V. carteri f. nagariensis constitutes, in its most simplified form, a cellularized spheroid built around and stabilised by a form of primitive extracellular matrix (ECM). We developed a modular approach to soft tissue engineering, by compact stacking V. carteri-based building blocks. This approach is made possible by the structure and cell adhesive properties of these building blocks, which results from the composition of their algal ECM. A primary biocompatibility assessment demonstrated the cytocompatibility of the algal suspension, its histogenesis-promoting properties, and that it did not induce an inflammatory response in vitro. These results allowed us to consider the use of this algal suspension for soft tissue augmentation, and to initiate an in vivo biocompatibility study. V. carteri exhibited cellular fate-directing properties, causing (i) fibroblasts to take on an alkaline phosphatase+ stem-cell-like phenotype and (ii) both human adipose-derived stem cells and mouse embryonic stem cells to differentiate into preadipocytes to adipocytes. The ability of V. carteri to support histogenesis and adipogenesis was also observed in vivo by subcutaneous tissue augmentation of athymic mice, highlighting the potential of V. carteri to support or influence tissue regeneration. We present for the first time V. carteri as an innovative and inspiring biomaterial for tissue engineering and soft tissue regeneration. Its strategies in terms of shape, structure and composition can be central in the design of a new generation of bio-inspired heterogeneous biomaterials recapitulating more appropriately the complexity of body tissues when guiding their regeneration.
Développement de biomatériaux bioinspirés non animaux pour l’ingénierie tissulaire : application en médecine régénérative: V. carteri f. nagariensis est un modèle établi pour l'étude des bases génétiques à l'acquisition de la multicellularité et la différenciation cellulaire. Cette algue constitue, une sphère structurée autour et stabilisée par une matrice extracellulaire primitive. Employant sa capacité à supporter l'adhésion cellulaire, j’ai développé une approche modulaire d'ingénierie des tissus mous par empilement compact de colonies de V. carteri. L’algue a démontré une cytocompatibilité, une promotion de l'histogenèse et une réponse non inflammatoire in vitro permettant d'envisager l'utilisation de V. carteri pour l'augmentation des tissus mous et lancer l’étude de sa biocompatibilité in vivo. Elle a présenté des propriétés de direction du devenir cellulaire, amenant les fibroblastes à adopter un phénotype de cellules souches à phosphatase alcaline+ et les cellules souches humaines et les cellules souches embryonnaires murines à se différencier en préadipocytes à adipocytes. Ses capacités de soutien de l'histogenèse et l'adipogenèse ont été confirmées in vivo par augmentation de tissu en sous-cutané sur souris athymiques, soutenant et influençant la régénération tissulaire. V. carteri a inspiré le développement d’autres matériaux alternatifs, d'origine végétale sous la forme d'hydrogel composite à base de cellulose caractérisé de manière approfondie pour l'augmentation des tissus mous. J’ai poursuivi l'approche biomimétique par l’étude de la faisabilité de formation d’un matériau végétal ou incluant l’algue, déclinant sa morphologie de microsphère et son contenu protéiques. Notre conclusion présente V. carteri comme un biomatériau innovant et inspirant pour l'ingénierie tissulaire et la régénération des tissus mous. Sa forme, sa structure et sa composition pourraient jouer un rôle central dans la conception d'une nouvelle génération de biomatériaux hétérogènes bio-inspirés, reflétant la complexité des tissus de l'organisme lors de leur régénération.