The dimensions, volumetric flow rates, and thermal capacities of an ethanol distillation system where solar energy is used as primary energy are examined in this article. A rigorous thermodynamic equilibrium analysis is applied to obtain the critical design parameters for the solar distillation of an ethanol-water solution with different feed stream concentrations (5%, 7%, and 10% wt. ethanol) to obtain a distillate product of 95% wt. ethanol. The volumetric flow of the feed stream is varied and a sensitivity analysis is performed to study its impact on the design of the solar distillation system. Important technical details, such as the configuration of the solar distillation system, the size of the distillation columns, reboiler heat duty, energy consumption per unit mass of distillate product, solar fraction, and collector area, among others, are evaluated and presented as a guideline for designers. The methodology developed herein is used to design the solar ethanol distillation system and can be extended to other geographical locations, weather conditions, and operational parameters.
A thermodynamic model of an ammonia–water absorption refrigeration cycle with heat integration was developed using Aspen Plus to investigate the impact of selected process variables on the energy efficiency and operational feasibility of the system. The coefficient of performance (COP), evaporator temperature, and refrigeration cycle heat flows were analyzed as a function of the high and low pressures of the system, as well as ammonia concentration in the generator feed, and UA, which is the product of the overall heat transfer coefficient (U) and the heat transfer area (A) of the solution heat exchanger. This article presents parametric studies that reveal the interdependence of these factors and quantifies their effects on system performance. The results indicate the feasibility of driving the cycle using low-temperature heat sources (e.g., solar thermal energy) for a range of cooling temperatures.