Sarmad Dawood Salman Dawood

Dr. Sarmad Dawood Salman Dawood

Ministry of Science and Technology, Baghdad, Baghdād, Iraq
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 June 2014 in Applied Mechanics and Materials
Verified
Journal Article
Closed access
PDF file
MHMohd Roshdi Hassan
Mohd Roshdi Hassan
Mehrshad MehrpouyaMehrshad Mehrpouya
Mehrshad Mehrpouya
Sarmad Dawood Salman DawoodSarmad Dawood Salman Dawood
Sarmad Dawood Salman Dawood
The purpose of this study is to identify machining difficulties of nickel-titanium based shape memory alloys. Nickel-titanium (Nitinol) is one the widely used shape memory material which is applied in many products in the aerospace, medical, and biomedical fields. NiTi alloy cannot be machined easily because of high tool wear, high cutting force, huge hardness and surface defects are made many problems into their machining. Investigation in micron precision shows plenty surface defects in machining process, something like debris of microchips, feed marks, tearing surface, deformed grains, material cracking and chip layer formation which consists the main problem in the machining of shape memory alloys. Moreover, these defects can be reduced or eliminated by changing the cutting parameters such as: feed rate, cutting speed and cutting depth so that, machining of nickel-titanium alloys would be improved.

11 January 2017 in Materials and Manufacturing Processes
Verified
Journal Article
Closed access
Mehrshad MehrpouyaMehrshad Mehrpouya
Mehrshad Mehrpouya
ASAbed Moheb Shahedin
Abed Moheb Shahedin
Sarmad Dawood Salman DawoodSarmad Dawood Salman Dawood
Sarmad Dawood Salman Dawood
AAAhmad Kamal Ariffin
Ahmad Kamal Ariffin
In the present work, the machinability of nickel–titanium (Nitinol) shape memory alloy has been discussed. Nitinol is known as a difficult-to-machine alloy due to its high hardness, which requires a large amount of cutting force, resulting in high rate of tool wearing. Therefore, researchers have made an effort to ameliorate the machinability of this material to achieve a finer surface quality. The previous studies found that the cutting speed will remarkably influence the surface properties of machined nickel–titanium alloy in turning process. Tool wear and cutting force are at minimum values in a particular range of cutting speeds so that it leads to diminishing machining barriers such as burr formation and chip-breaking. Lower cutting force and consequently lower temperature and stresses in the machining process improve the mechanical properties as well as reducing hardness, distortion, and residual stress. The machining process was optimized by applying a numerical approach through ANSYS/LS-DYNA R15 software. The obtained results demonstrated the optimum cutting speed in the machining process, which are in good agreement with experiments.

1 January 2015 in Acta Astronautica
Verified
Journal Article
Closed access
Sarmad Dawood Salman DawoodSarmad Dawood Salman Dawood
Sarmad Dawood Salman Dawood
OIOthman B. Inayatullah
Othman B. Inayatullah
RSRazali B. Samin
Razali B. Samin

4 January 2022 in Aerospace
Verified
Journal Article
Open access
PDF file
Sarmad Dawood Salman DawoodSarmad Dawood Salman Dawood
Sarmad Dawood Salman Dawood
AHAhmad Salahuddin Mohd Harithuddin
Ahmad Salahuddin Mohd Harithuddin
MOHAMMAD YAZDI HARMINMOHAMMAD YAZDI HARMIN
MOHAMMAD YAZDI HARMIN
Mass reduction is a primary design goal pursued in satellite structural design, since the launch cost is proportional to their total mass. The most common mass reduction method currently employed is to introduce honeycomb structures, with space qualified composite materials as facing materials, into the structural design, especially for satellites with larger masses. However, efficient implementation of these materials requires significant expertise in their design, analysis, and fabrication processes; moreover, the material procurement costs are high, therefore increasing the overall program costs. Thus, the current work proposes a low-cost alternative approach through the design and implementation of geometrically-shaped, parametrically-defined metal perforation patterns, fabricated by standard processes. These patterns included four geometric shapes (diamonds, hexagons, squares, and triangles) implemented onto several components of a structural design for a conceptual satellite, with a parametric design space defined by two scale factors and also two aspect ratio variations. The change in the structure’s fundamental natural frequency, as a result of implementing each pattern shape and parameter variation, was the selection criterion, due to its importance during the launcher selection process. The best pattern from among the four alternatives was then selected, after having validated the computational methodology through implementing experimental modal analysis on a scaled down physical model of a primary load-bearing component of the structural design. From the findings, a significant mass reduction percentage of 23.15%, utilizing the proposed perforation concept, was achieved in the final parametric design iteration relative to the baseline unperforated case while maintaining the same fundamental frequency. Dynamic loading analysis was also conducted, utilizing both the baseline unperforated and the finalized perforated designs, to check its capability to withstand realistic launch loads through applying quasi-static loads. The findings show that the final perforated design outperformed the baseline unperforated design with respect to the maximum displacements, maximum Von Mises stresses, and also the computed margin of safety. With these encouraging outcomes, the perforated design concept proved that it could provide an opportunity to develop low-cost satellite structural designs with reduced mass.

16 August 2022 in Aerospace
Verified
Journal Article
Open access
PDF file
Sarmad Dawood Salman DawoodSarmad Dawood Salman Dawood
Sarmad Dawood Salman Dawood
MOHAMMAD YAZDI HARMINMOHAMMAD YAZDI HARMIN
MOHAMMAD YAZDI HARMIN
Satellite systems undergo several operational phases during their service life, including the assembly phase, ground transportation phase, the launch phase, and the in-orbit operation phase. Among these phases, the one that imposes the highest level of loadings on the satellite is the launch phase. This phase involves a number of highly dynamic loads, all being imposed upon the satellite simultaneously. Investigation of the responses of the structural subsystem of a satellite to these loadings, namely its maximum deformations and maximum von Mises stresses, is critical if a reasonably high level of confidence is to be achieved. This confidence is in terms of ensuring that no material yielding develops in the structure as a result of the imposed launch loadings. In an earlier work, the structural subsystem of a conceptual microsatellite was designed, employing aluminum 6061 alloy as its material. It was then modified through introducing sets of parametrically defined geometric patterns as perforation patterns to remove material, towards reducing the structure’s total mass, as an alternative to employing composite materials. That effort led to a mass reduction percentage of 23.15%. The current work’s research effort focused on computing the responses of the perforated structure to three of the dynamic launch loads that are imposed upon satellites while being launched, namely quasi-static, random, and shock loads. These responses were then compared to those of the baseline, unperforated, version of the same structure. The values of these loads were taken from the relevant sources, with the values being nominal, and represented the loads that any satellite must qualify for before it can be accepted by the provider for inclusion in a launcher. After imposing these load values upon the structural design it was found that the structural responses indicated that the structure would successfully survive these loads without developing stresses that would lead to material yielding failure. This was deduced from computing the yield margins of safety for each loading case, and all margin values were positive, indicating that the structure, at its current development stage, did have sufficient capacity to withstand these loads without material yielding. This reinforced the conclusion of the earlier work, namely that the perforation concept did have sufficient merit to be further developed towards being implemented in future satellite designs.