Nowadays, the number of aging civil infrastructures is growing world-wide and when concrete is involved, cracking and delamination can occur. Therefore, ensuring the safety and serviceability of existing civil infrastructure and preventing an inadequate level of damage have become some of the major issues in civil engineering field. Routine inspections and maintenance are then required to avoid leaving these defects unexplored and untreated. However, due to the limitations of on-field inspection resources and budget management efficiency, automation technology is needed to develop more effective and pervasive inspection processes. This paper presents a pixel-wise classification method to automatically detect and quantify concrete defects from images through semantic segmentation network. The proposed model uses Deeplabv3+ network with weights initialized from pre-trained neural networks. The comparison study among the performance of different deep neural network models resulted in ResNet-50 as the most suitable network for applications of civil infrastructure defects segmentation. A total of 1250 images have been collected from the Internet, on-field bridge inspections and Google Street View in order to build an invariant network for different resolutions, image qualities and backgrounds. A randomized data augmentation allowed to double the database and assign 2000 images for training and 500 images for validation. The experimental results show global accuracies for training and validation of 93.42% and 91.04%, respectively. The promising results highlighted the suitability of the model to be integrated in digitalized management system to increase the productivity of management agencies involved in civil infrastructure inspections and digital transformation.

Curved beam, plate, and shell finite elements are commonly used in the finite element modeling of a wide range of civil and mechanical engineering structures. In civil engineering, curved elements are used to model tunnels, arch bridges, pipelines, and domes. Such structures provide a more efficient load transfer than their straight/flat counterparts due to the additional strength provided by their curved geometry. The load transfer is characterized by the bending, shear, and membrane actions. In this paper, a higher-order curved inverse beam element is developed for the inverse Finite Element Method (iFEM), which is aimed at reconstructing the deformed structural shapes based on real-time, in situ strain measurements. The proposed two-node inverse beam element is based on the quintic-degree polynomial shape functions that interpolate the kinematic variables. The element is C² continuous and has rapid convergence characteristics. To assess the element predictive capabilities, several circular arch structures subjected to static loading are analyzed, under the assumption of linear elasticity and isotropic material behavior. Comparisons between direct FEM and iFEM results are presented. It is demonstrated that the present inverse beam finite element is both efficient and accurate, requiring only a few element subdivisions to reconstruct an accurate displacement field of shallow and deep curved beams.

The heritage of existing road infrastructures and in particular of bridges consists of structures that are approaching or exceeding their designed service life. Detrimental causes such as aging, fatigue and deterioration processes other than variation in loading conditions introduce uncertainties that make structural assessment a challenging task. Experimental data on their performances are crucial for a proper calibration of numerical models able to predict their behavior and life-cycle structural performance. In this scenario, an experimental research program was established with the aim of investigating a set of 50-year-old prestressed concrete bridge girders that were recovered from a decommissioned bridge. The activities included initial non-destructive tests, and then full-scale load tests followed by a destructive test on the material samples. This paper reports the experimental results of the full-scale tests conducted on the first group of four I-beams assumed to be in good condition from visual inspection at the time of testing. Loading tests were performed using a specifically designed steel reaction frame and a test setup equipment, as detailed in the present work. Due to the structural response of this first group of girders, a uniform behavior was found at both service and ultimate conditions. The failure mechanism was characterized by the crushing of the cast-in-situ top slab corresponding to a limited deflection, highlighting a non-ductile behavior. The outcomes of the experimental research are expected to provide new data for the life-cycle safety assessment of existing bridges through an extended database of validated experimental tests and models.

Structural monitoring plays a key role for underground structures such as tunnels. Strain readings are expected to report structural conditions during construction and at the final delivery of the works. Furthermore, it is increasingly requested an extension to long-term monitoring from contractors with possible use of the same system in service during construction. A robust and efficient monitoring methodology from discrete strain measurements is the inverse finite element method (iFEM), which allows to reconstruct the structural response without input data on the load pattern applied to the structure as well as material and inertial properties of the elements and therefore it is interesting for structural configurations affected by uncertain loading conditions, such as the tunnel. The formulation presented in this paper, based on the iFEM theory, is improved from the previous work available in literature for both the shape functions used and the computational procedure. Indeed, the approach allows to overcome inconsistencies related to structural loading conditions and a pseudo-inverse matrix preserve all the rigid body modes without imposing specific constraints which is typical for tunnels. Numerical validation of the iFEM procedure is performed by simulating the input data coming from a tunnel working in a heterogeneous soil under different loading conditions with direct FEM analysis.

The use of in situ strain measurements to reconstruct the deformed shape of structures is a key technology for real-time monitoring. A particularly promising, versatile and computationally efficient method is the inverse finite element method (iFEM), which can be used to reconstruct the displacement field of beam elements, plate and shell structures from some discrete strain measurements. The iFEM does not require the knowledge of the material properties. Nevertheless, it has always been applied to structures with linear material constitutive behavior. In the present work, advances are proposed to use the method also for concrete structures in civil engineering field such as bridges normally characterized by material nonlinearities due to the behavior of both steel and concrete. The effectiveness of iFEM, for simply supported reinforced concrete beam and continuous beams with load conditions that determine the yielding of reinforcing steel, is studied. In order to assess the influence on displacements and strains reconstructions, different measurement stations and mesh configurations are considered. Hybrid procedures employing iFEM analysis supported by bending moment-curvature relationship are proposed in case of lack of input data in plastic zones. The reliability of the results obtained is tested and commented on to highlight the effectiveness of the approach.