Rapid and accurate surveying has always attracted great interest in all scientific and industrial activities that require high-resolution topographic data. The latest automation and advancement in geomatics engineering are remote sensing solutions using Unmanned Aerial Systems (UAS) and Structure from Motion (SfM) with Multi-View Stereo (MVS) photogrammetry. This research aimed to find the influence of flight height, Ground Control Point (GCP), and software on the geometric accuracy of UAS-SfM-derived Digital Surface Models (DSMs) and orthoimages, as well as to analyze and evaluate the accuracy of UAS-SfM as a rapid and low-cost alternative to conventional survey methods. To achieve the aim of the study, aerial surveys using a fixed-wing UAS and field surveys using RTK GNSS and total station were conducted. A total of 16 photogrammetric projects were processed using different GCP configurations, and detailed statistical analysis was performed on the results. Moreover, the contribution of cross flight on bundle adjustment was investigated empirically by conducting a combined photogrammetric image processing. The analysis revealed that flight height, GCP number and distribution, and the processing software significantly affect products' quality and accuracy. Evaluation of the achieved accuracies was made based on the American Society for Photogrammetry and Remote Sensing (ASPRS) positional accuracy standard for digital geospatial data. The findings of this study revealed that using the optimal flight height and GCP configuration, 3D models, orthomosaics and DSMs can be rapidly reconstructed from 2D images with the quality and accuracy sufficient for most terrain analysis applications, including civil engineering projects.

Photogrammetric surveying using unmanned aerial systems (UAS) and structure from motion (SfM) is a rapidly emerging technique that has been widely used as a valuable research tool in geodesy and related disciplines. We studied surveying and three-dimensional (3D) modeling based on UAS and SfM. In particular, we focus on the accuracy and quality of UAS-SfM in 3D modeling and volumetric calculation of a building with an overhanging feature. For this purpose, two aerial surveys were performed using a fixed-wing and a multirotor aircraft with nadir and oblique camera axes. For validating the results, field surveys were carried out using terrestrial laser scanner (TLS), differential global navigation satellite system, and total station. To study the performance of SfM software on the accuracy and quality of point clouds, UAS images were processed using three software packages: Agisoft PhotoScan, Pix4Dmapper, and 3Dsurvey. As a result of photogrammetric image processing, 3D dense point clouds, mesh models, and digital surface models were generated. For validating the UAS-SfM results, the models were compared with the TLS model and field measurements; absolute accuracy assessments and model versus model comparisons were performed. The most accurate and high-quality 3D models comparable to TLS models were obtained from oblique images. PhotoScan generated relatively more accurate 3D models with the horizontal and vertical accuracy of root mean square error 0.025 and 0.02 m, respectively. The maximum discrepancies in dimensions and volume measurements from the UAS-SfM-derived point cloud were at the level of 0.01 m and 0.66 m3 (0.03%). The results highlighted that using a low-cost UAS and SfM photogrammetry, high-accuracy and high-quality 3D models can be generated. The results confirm that with respect to its rapid data acquisition and centimeter-level accuracy, UAS-SfM can be considered as a suitable alternative approach to conventional measurement techniques, especially in engineering and emergency response.