Sekhar Reddy Kola

Dr. Sekhar Reddy Kola


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 August 2023 in IEEE Access
Verified
Journal Article
Open access
VSV. Bharath Sreenivasulu
V. Bharath Sreenivasulu
ANAruna Kumari Neelam
Aruna Kumari Neelam
Sekhar Reddy KolaSekhar Reddy Kola
Sekhar Reddy Kola
JSJawar Singh
Jawar Singh
Yiming LiYiming Li
Yiming Li
In this article, the performance of 3-D nanosheet FET (NS-FET) in inversion (INV) and junctionless (JL) modes is demonstrated and compared at both device and circuit levels. In JL mode, the I ON rises with an increase in temperature compared to the downfall trend in INV mode. In addition, compared to JL mode, the INV mode exhibits a better negative temperature coefficient of threshold voltage (d V th /dT). Further, the mixed mode circuit simulations are carried out using the Cadence Virtuoso platform through the Verilog-A model. From the analysis, it is observed that an increase of 20% gain in INV mode compared to JL mode for a common source (CS) amplifier. JL mode NS-FETs achieve higher CMOS inverter switching current ( I SC ) and lower energy-delay products (EDP) as temperature rises. A three-stage ring oscillator (RO) is designed, and the oscillation frequencies ( f OSC ) of 43.39 GHz and 38.8 GHz are obtained with INV and JL modes. Although JL NSFET offers less intrinsic capacitances, the f OSC is high for INV mode due to higher I ON . Furthermore, reducing supply voltage ( V DD ), the f OSC falls by 67% with INV and 62.6% with JL modes. These results will give a better understanding of this emerging NS-FET at both device and circuit levels at advanced technology nodes.

5 May 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
YYYa-Shu Yang
Ya-Shu Yang
Yiming LiYiming Li
Yiming Li
Sekhar Reddy KolaSekhar Reddy Kola
Sekhar Reddy Kola
We report a compact modeling framework based on the Grove–Frohman (GF) model and artificial neural networks (ANNs) for emerging gate-all-around (GAA) MOSFETs. The framework consists of two ANNs; the first ANN constructed with the drain current model not only can capture the main trend of device $\textit{I}$ – $\textit{V}$ characteristics but also can predict its variation even when the amount of training data for the ANN is insufficient or outside the range of applied biases. The second one is then designed to improve the model accuracy by further minimizing the errors between the target and the model outputs. We implement the proposed framework to accurately model emerging GAA nanosheet (NS) MOSFETs and complementary FETs (CFETs) without suffering from divergent issues in circuit simulation. In addition, nonphysical behaviors, such as nonzero current at zero bias, do not occur in the modeling framework. Compared to recently reported machine-learning (ML) models, our approach can achieve a similar level of model accuracy with merely 20% amount of the training data.

5 July 2022 in IEEE Access
Verified
Journal Article
Open access
RBRajat Butola
Rajat Butola
Yiming LiYiming Li
Yiming Li
Sekhar Reddy KolaSekhar Reddy Kola
Sekhar Reddy Kola
The sensitivity of semiconductor devices to any microscopic perturbation is increasing with the continuous shrinking of device technology. Even the small fluctuations have become more acute for highly scaled nano-devices. Therefore, these fluctuations need to be addressed extensively in order to continue further device scaling. In this paper, we mainly focus on three sources of intrinsic parameter fluctuation including the work function fluctuation (WKF), the random dopant fluctuation (RDF), and the interface trap fluctuation (ITF) for gate-all-around (GAA) silicon (Si) nanosheet (NS) MOSFETs. Generally, the effect of these fluctuations is analyzed using a time-consuming device simulation process. A machine learning (ML) based powerful and efficient artificial neural network (ANN) model is used to accelerate this process. Firstly, the effects of fluctuation sources are analyzed individually by using the ANN model and results have been presented that show the WKF variations dominate the variation of threshold voltage, off-state current, and on-state current among other fluctuation sources. Next, we examine the combined effect of three fluctuation sources. It is crucial because considering only one fluctuation can result in unexpected variations due to other fluctuations appearing in the device. Consequently, the ANN model is used to estimate the combined effects as well. The results show that the proposed model predicts the outputs with an R 2 -score of 99% and an error rate of less than 1%. In addition, the ML is also utilized to calculate the permutation importance of input variables as a measure to investigate the contribution of each fluctuation source.

30 October 2023 in IEEE Open Journal of Nanotechnology
Verified
Journal Article
Open access
RBRajat Butola
Rajat Butola
Yiming LiYiming Li
Yiming Li
Sekhar Reddy KolaSekhar Reddy Kola
Sekhar Reddy Kola
Machine learning (ML) is poised to play an important part in advancing the predicting capability in semiconductor device compact modeling domain. One major advantage of ML-based compact modeling is its ability to capture complex relationships and patterns in large datasets. Therefore, in this paper a novel design scheme based on dynamically adaptive neural network (DANN) is proposed to develop fast and accurate compact model (CM). This framework constitutes a powerful yet computationally efficient methodology and exhibits emergent dynamic behaviors. This paper demonstrates that the compact model based on ML can be designed to replicate the performance of conventional compact model for nanodevices. For this work, gate-all-around (GAA) nanosheet (NS) device characteristics are comprehensively analyzed for process variability sources using the proposed model. The device geometry parameters such as channel length, nanosheet width and nanosheet thickness are fed as input features to the DANN model. The adaptive neural network learns dynamically by updating weights of the model in accordance with the input features and achieves accurate neural weight convergence. The proposed model predicted the electrical characteristics of NS devices with less than 1% error rate. The model is also implemented and validated for the simulations of digital circuit designs such as inverter, and logic gates.

1 January 2020 in IEEE Open Journal of Nanotechnology
Verified
Journal Article
Open access
NTNarasimhulu Thoti
Narasimhulu Thoti
Yiming LiYiming Li
Yiming Li
Sekhar Reddy KolaSekhar Reddy Kola
Sekhar Reddy Kola
SSSeiji Samukawa
Seiji Samukawa
This work comprises of design and simulation of multi-channel line tunnel field-effect transistors (mCLTFETs) by scaling inter-gate separation (IGS) and overlapped source (L OV ). The scope of the work is to explore the performance boost and optimization of the studied devices by considering geometrical structures, low-bandgap materials, IGS and L OV of the mCLTFETs. The structure is designed without diminishing the subthreshold swing (SS) and the leakage currents through a spacer technology and strained Si 0.6 Ge 0.4 . The optimal values of IGS and L OV for the multi-channel concept are estimated subject to several physical constraints of the proposed device. An IGS ≈ 10 nm and a L OV ≈ L G /2 are reported as suitable choice for sub-8-nm technological nodes, where SS = 18 mV/dec and I on /I off = 10 9 are achieved.

26 August 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
RBRajat Butola
Rajat Butola
Yiming LiYiming Li
Yiming Li
Sekhar Reddy KolaSekhar Reddy Kola
Sekhar Reddy Kola
CCChieh-Yang Chen
Chieh-Yang Chen
MCMin-Hui Chuang
Min-Hui Chuang
Advanced field-effect transistors (FETs), such as gate-all-around (GAA) nanowire (NW) and nanosheet (NS) devices, have been highly scaled; therefore, they are critically affected even by a microscopic fluctuation. As the GAA NS device is considered a promising candidate beyond 5-nm technology, it is essential to analyze the effects of these fluctuations on dc and analog/radio frequency (RF) characteristics for future applications. In this article, we for the first time demonstrate that the machine learning (ML)-aided numerical device simulation approach can be used to model the effects of various fluctuations on the characteristics of GAA NS FETs (NSFETs). Among various fluctuations, we mainly focus on work function fluctuation (WKF), random dopant fluctuation (RDF), and interface trap fluctuation (ITF). The independent and combined effects of these fluctuations on the characteristics of NSFETs are studied. Except for transfer and output characteristics, analog and RF parameters, such as gate capacitance, transconductance, cutoff frequency, 3-dB frequency, and transconductance efficiency, are analyzed in detail. The main aim of this work is to show the capability and generality of ML in modeling various electrical characteristics of the explored NSFETs. The results show that the ML-based technique is fast and efficient, which accelerates the overall process and gives engineering acceptable accurate results.