This paper describes the fabrication and testing of a novel angle-scanning surface plasmon resonance imaging (SPRi) instrument. The combination of two stationary mirrors and two angle-controlled mirrors provides high accuracy (up to 10−3°) and high-speed angular probing. This instrument minimizes the angle-dependent image artifact that arises due to beam walk, which is the biggest challenge for the use of SPRi with angular modulation (AM). In the work described in this paper, two linear stages were employed to minimize the image artifact by adjusting the location of the angle-controlled mirrors and the camera. The SPRi instrument was used to visualize coalescence during dropwise condensation. The results show that the effect of the environment’s temperature on reflectance was less than 1% when the incident angle was carefully chosen for SPRi with intensity modulation (IM). This means that condensation visualization can be carried out at ambient temperatures, without the need for a Peltier stage or a thermally controlled condensing surface. The concept of pixel neighboring was employed to assess the probability of noise and the standard error of thin film measurement. Experimental analyses during dropwise condensation show (1) the presence of a thin film with thickness of one monolayer, and (2) surface coverage of 0.71 m2/m2 by the thin film in the area between the droplets. In addition, analyses showed the existence of a dry area at the part of the substrate exposed by coalescence to ambient air. The results of this work undermine the validity of the film rupture theory as the dropwise condensation mechanism. Graphic
1 January 2018 in Journal of Flow Visualization and Image Processing
Surface plasmon resonance imaging is an inexpensive label-free technique that is sensitive to changes of the refractive index at the solid-fluid interface. However, this technique has been mostly used in the detection system and the visualization of slow process interfacial phenomena. In this work, SPRi is employed as a mean to visualize interfacial phenomena with high-frequency feature such as coalescence during dropwise condensation. The corresponding image processing method to detect materials on the solid surface is demonstrated. Two methods of increasing a temporal resolution are implemented to record three steps of coalescence evolution- bridge formation, composite peanut shape droplet formation, and relaxation stage- at 10000 fps. The first method focuses on shortening the illumination path using a biconvex lens with a small focal length as a collimator. The second technique is to increase the optical power of incident lights by broadening the bandpass filter. The broadening can increase the temporal resolution at the expense of reducing sensitivity in the SPR system. In our SPRi instrument at 523 nm, the broadening the bandpass filter from FWHM of 10 nm to FWHM of 60 nm increases the temporal resolution by 233% and decrease the sensitivity by 14.5%.
Using surface plasmon resonance imaging (SPRi), we have recently shown for the first time the existence of a monolayer water film between droplets during dropwise condensation. This study examines the effect of adsorbed volatile organic compounds (VOCs) on the ultrathin film measurement using SPRi. Further, the work presents the proper surface-treatment process that enables measurements of the ultrathin water layer during high-speed imaging of dropwise condensation at 3000 frame per second. In this study, two methods were applied for cleaning the surface (gold-coated glass)—(1) standard cleaning procedure (SCP) using acetone, isopropyl alcohol, and deionized water and (2) SCP followed by air plasma cleaning. This work discusses the effect of the cleaning procedures on surface roughness, contact angle, and surface chemistry using atomic force microscopy, optical microscopy, and an X-ray photoelectron spectroscope meter. The results showed that SCP before the SPRi is a proper surface-treatment method. The effect of adsorbed VOCs during dropwise condensation on a surface treated with SCP was measured to be 0.0025 (reflectivity unit), which was 70% smaller than the reflectance associated with a monolayer water film. The results of this work confirm a monolayer water film observation during the dropwise condensation, which has been reported before.
1 June 2012 in Journal of Dispersion Science and Technology
A simple curing condition was introduced to fabricate a stable superhydrophobic surface on aluminum. In this method, hierarchical structure by low energy hydrophobic groups (trichloromethylsilane) are combined and after annealing in a radiative type oven, exhibit superhydrophobic properties with water contact angle of more than 160° and water sliding angle of less than 3°. Scanning electron microscopy (SEM) images of the resulting surface show that the surface is covered by various sizes of submicroscopic filaments, which become more regular and adhesive when curing in the radiative oven. It also indicates that the stability and durability of the structure significantly improved through this heating process.