At present, numerous wall-climbing robots have been developed, and applied in ship manufacturing for weld detection to ensure safe navigation. Limited by rigid mechanical structure and complex detection, mostly existing robots are hardly to complete weld detection by using fluorescent magnetic particles. Based on permanent magnet adsorption, a wheeled wall-climbing robot is developed to realize the stable adsorption and flexible movement on ship wall. A detection mechanism is designed using a series and parallel flexible adaptation structure to keep cross yokes and detection area close for effective detection. A unified mechanical model is established by analyzing the angle between robot attitude and gravity, to solve safe adsorption and flexible movement for different detection conditions. Integrated the multisensor information and collaboration between control component, an automatic detection control workflow conforms to the standard process is proposed. Experiments show that the robot can move on curvature wall flexibly and stably, complete the weld detection with the standard process, and clearly display the shape and depth of the small defects (groove depth ≥ 30 μm) in standard specimen.
To solve the problems that the theoretical analysis of Halbach array magnetic circuit is insufficient and that calculating the magnetic adsorption force of a permanent magnet by using the magnetic node method is complex, the magnetic flux density of a Halbach array magnetic circuit composed of multiple permanent magnets with perpendicular magnetization directions is calculated. On the basis of the concentrated magnetic phenomenon of the ferromagnetic material and the end effect of the permanent magnet, a method for calculating the magnetic adsorption force of the Halbach array magnetic circuit by using the equivalent magnetic flux density is proposed, and the variation trend of magnetic adsorption force after changing the parameters of the magnetic circuit is obtained. ANSYS software is used to analyze several magnetic circuits that produce large magnetic adsorption force, a magnetic circuit structure that produces the largest magnetic adsorption force is determined, and the permanent magnetic adsorption device of the wall-climbing robot is improved. The magnetic adsorption force of the wall-climbing robot before and after the improvement of the permanent magnetic adsorption device is measured through experiments. The experimental results show that the magnetic adsorption force after the improvement is increased by 24.63% compared to before the improvement.
At present, a large number of magnetic wall-climbing robots are applied to various magnetically conductive metal facades for detection and anti-corrosion work. Limited by the wall-climbing mechanism and adsorption device, most wall-climbing robots can only climb on smooth walls, and it is difficult to adapt to complex walls. Therefore, by studying the multi-media magnetic circuit conduction mechanism, a permanent magnetic adsorption wheel with a magnet array arrangement was designed in this study and applied to a hinge-type wall-climbing robot. By analyzing the influence of structural parameters on the adsorption performance and optimization design, a magnetic wheel structure with a symmetric structure that can meet a variety of adsorption requirements was obtained. To analyze the mechanical characteristics of the wall-climbing robot under complex facade conditions, we researched the adsorption performance of the designed magnetic wheel in different wall structures. Finally, the adhesion force of the magnetic wheel was verified through experimental measurements, and it was found that the hinged wall-climbing robot could adapt to different structural features and complete wall-transition and obstacle-crossing movements.
Currently, divers face significant safety risks when cleaning marine organisms from the steel structures of offshore underwater platform jackets. Consequently, utilizing robots instead of divers to carry out underwater biofouling removal operations will be an important development direction for the underwater maintenance of offshore platforms in the future. In this study, a wall-climbing robot was designed to clean marine organisms from the underwater surface of a platform jacket leg. The overall structure of the underwater cleaning wall-climbing robot is introduced, including the cleaning actuator and the variable curvature-adapted connecting rod mechanism. The corresponding relationship between the variable curvature-adapted connecting rod mechanism and the jacket leg is analyzed in detail. The variable curvature-adapted connecting rod mechanism was optimized using a genetic algorithm to ensure that the underwater cleaning wall-climbing robot can adapt to a minimum diameter of 1 m for the jacket leg. By drawing on Airy wave theory and random wave theory, the Airy wave parameters for waves were analyzed under different sea conditions, considering practical application scenarios. By using Fluent software 2022, a 2D numerical wave tank was constructed to simulate waves under various sea conditions, and the wave surface shapes for different sea states were determined. By building on the Morison equation, a method for calculating the horizontal wave forces on the underwater cleaning wall-climbing robot using the equivalent area and equivalent volume is proposed. By using the two aforementioned methods, the horizontal wave forces on the underwater cleaning wall-climbing robot under specific sea states were determined. The horizontal wave forces of the underwater cleaning wall-climbing robot under different sea conditions were analyzed and simulated in a 3D numerical wave tank. By comparing the theoretical analysis results with the numerical simulation results, where the maximum difference at the extreme points is approximately 11%, the feasibility of the proposed horizontal wave force estimation method was verified.