Analyzing and mastering the fractal features of coal-measure sedimentary rocks is crucial for accurately describing the pore structure of coalbed methane resources. In this work, mercury intrusion porosimetry (MIP) and nuclear magnetic resonance (NMR) are performed on coal-measure sedimentary rocks (i.e., shale, mudstone, and sandstone) to analyze their pore structure. Pore size distributions (PSDs) and the multifractal dimensions of the investigated samples are discussed. Moreover, multivariable linear regression models of multifractal dimensions are established through a comprehensive analysis of multifractal characteristics. The results show that sandstone (SS-1) and clay rocks are dominated by nanopores of 0.01 to 1 μm, while sandstone (SS-2) is mostly mesopores and macropores in the range of 1 to 10 μm. The fractal characteristics of the investigated rock samples show a prominent multifractal characteristic, in which DA reflects the surface structure of micropores, while DS represents the pore structure of macropores. Multifractal dimension is affected by many factors, in which the DA is greatly influenced by the pore surface features and mineral components and the DS by average pore diameters. Moreover, multivariate linear regression models of adsorption pore and seepage pore are established, which have a better correlation effect on the multifractal dimension.
Deep low-rank coalbed methane (CBM) resources are numerous and widely distributed in China, although their exploration remains in its infancy. In this work, gas adsorption (N2/CO2), mercury intrusion porosimetry, and 3D CT reconstruction were performed on five coal samples of deep and shallow low-rank coal from northeast China to analyze their pore structure. The impact of the features in the pore structure at full scale on the capacity for methane adsorption and seepage is discussed. The results indicate that there are significant differences between deep low-rank coal and shallow low-rank coal in terms of porosity, permeability, composition, and adsorption capacity. The full-scale pore distribution was dispersed over a broad range and exhibited a multi-peak distribution, with the majority of the peak concentrations occurring between 0.45–0.7 nm and 3–4 nm. Mesopores are prevalent in shallow coal rock, whereas micropores are the most numerous in deep coal rock. The primary contributors to the specific surface area of both deep and superficial coal rock are micropores. Three-dimensional CT reconstruction can characterize pores with pore size greater than 1 μm, while the dominating equivalent pore diameters (Deq) range from 1 to 10 μm. More mini-scale pores and fissures are observed in deep coal rock, while shallow coal rock processes greater total and connection porosity. Multifractal features are prevalent in the fractal qualities of all the numbered samples. An enhancement in pore structure heterogeneity occurs with increasing pore size. The pore structure of deep coal rock is more heterogeneous. Furthermore, methane adsorption capacity is favorably connected with D1 (0.4 nm < pore diameter ≤ 2 nm), D2 (2 nm < pore diameter ≤ 5 nm), micropore volume, and specific surface area and negatively correlated with D3 (5 nm < pore diameter ≤ 50 nm), showing that methane adsorption capability is primarily controlled by micropores and mesopores. Methane seepage capacity is favorably connected with the pore volume and connected porosity of macropores and negatively correlated with D4 (pore diameter > 50 nm), indicating that the macropores are the primary factor influencing methane seepage capacity.
29 July 2023 in Rock Mechanics and Rock Engineering
Analyzing and mastering the pore structure and fluid movability characteristics of coal-measure sedimentary rocks is significant for the safe and effective development of unconventional resources. In this work, nuclear magnetic resonance (NMR) experiments were carried out on three common fine sedimentary rocks (i.e., shale, mudstone, and sandstone) from a coal-measure stratum in northern China. NMR transverse (T2) of the water-saturated and centrifuged rock samples are compared and analyzed. Moreover, the pore size distribution (PSD) and the free-fluid volume index (FFI) of the investigated samples are discussed. Results have shown that the shale and mudstone samples are mainly dominated by adsorption pores with a diameter of 0.01–1 μm, while the sandstone samples are dominated by seepage pores with a diameter of 1–100 μm. The FFI results calculated by the cutoff and the area methods are 11.15–77.62 and 7.56–75.96%, respectively. There are good correlations between FFI and porosity, permeability, and reservoir quality index (RQI). Also, the effects on FFI are different on various kinds of clay minerals. The contents of illite and chlorite are negatively correlated with FFI, while kaolinite is positively correlated with FFI.