The present study analyzed the effect of temperature, pH, pre-treatment and mixing ratio on the anaerobic digestion process. The parameters during the anaerobic co-digestion of cow manure and food waste were then optimized using the Taguchi experimental design method. ANOVA was carried out to find the significant parameters which influence biogas production. Experimental tests were carried out at laboratory-scale reactors kept at different temperatures (28 °C, 35 °C, and 50 °C). The specific methanogenic performance (SMP) during anaerobic digestion at higher temperatures was characterized with the analysis of acetate, propionate, butyrate, hydrogen, glucose, and formate, and was validated with the literature. The improvement of biogas production with different pre-treatments, i.e., ultrasonic, autoclave, and microwave techniques, was also analyzed. The results showed that the reactor that was maintained at 35 °C showed the highest biogas production, while the reactor that was maintained at a lower temperature (28 °C) produced the lower volume of biogas. As the retention time increases, the amount of biogas production increases. Methanogenic activities of microorganisms were reduced at higher temperature conditions (65 °C). Biogas production increased by 28.1%, 20.23%, and 13.27% when the substrates were treated with ultrasonic, autoclave, and microwave, respectively, compared to the untreated substrate. The optimized condition for the highest biogas production during anaerobic co-digestion of food waste and cow manure is a temperature of 35 °C, a pH of 7 and a mixing ratio (CM:FW = 1.5:0.5). ANOVA showed that temperature is the most important input parameter affecting biogas production, followed by mixing ratio.

The global shift from conventional energy sources to sustainable alternatives has garnered significant attention, driven by the promise of economic benefits and environmental sustainability. The current study rigorously investigated the economic advantages and sustainability achieved from the transition of households in Mauritania from liquefied petroleum gas (LPG) to biogas utilization. The study constitutes a robust case study that centers on assessing the multifaceted impacts of this transition on household finances and overall quality of life in Mauritania. This case focuses on biogas technology adoption and its role as a competitor of LPG in Mauritania. The energy poverty portfolio of the nation has been explored and livestock waste generation and biogas production potential have been estimated at 2451 million cubic meters annually. Biogas production can fulfill 50% of the energy requirement for cooking purposes within the country. The community scale fixed-dome-type biogas digesters have been recommended for Mauritania by considering a community of 100 families. The calculated payback period for the community project is 74 months, and after the payback period, continuous monthly benefits of USD 1750 will be started. Livestock manure is directly utilized for farming practices in Mauritania, which produces 10.7 Gg of methane emissions per year. Biogas production is a clean and economically viable option for Mauritania, which can also be beneficial for reducing the methane emissions footprints of the livestock sector. This case study will prove as a vital project for other African nations if successfully implemented. Multiple recommendations for the policy-makers of Mauritania have also been formulated, like tariffs on biogas production facilities and swift financing schemes, which can further strengthen the biogas production on a national scale. International funders should also take part in coping with the energy demand of Mauritania and its mission to mitigate climate change rather than utilizing LPG on a national scale. Biogas production and utilization are much cheaper compared with the fluctuating prices of LPG and ensure health when cooking.

The present study analyzed the effect of temperature, pH, retention time, pretreatment and mixing ratio on the anerobic digestion process. The parameters during the anaerobic co digestion of cow manure and food waste were then optimized using the Taguchi experimental design method. ANOVA is carried out to find the significant parameters which influence the biogas production. Experimental tests were carried out at laboratory scale reactors kept at different temperatures (28 °C, 35 °C, and 50 °C). The specific methanogenic Performance (SMP) during anerobic digestion at higher temperatures was characterized with the analysis of acetate, propionate, butyrate, hydrogen, glucose, and formate. The improvement of biogas production with different pre-treatment i.e., ultrasonic, autoclave, and microwave techniques also analysed. The results showed that reactor that maintained at 35 °C showed the highest biogas production. While the reactor that maintained at lower temperature (28 °C) produced the lower volume of biogas. As the retention time increases, the amount of biogas produced increases. Methanogenic activities of microorganisms reduced at higher temperature conditions (65 °C). Biogas production increased by 28.1%, 20.23%, and 13.27 % when the of substrates treated with ultrasonic, autoclave, and microwave, respectively, compared to the untreated substrate. The optimized condition for the highest biogas production during anaerobic co digestion of food waste and cow manure is temperature of 35 °C, pH of 7 and mixing ratio (CM: FW=1.5:0.5). ANOVA showed that temperature is the most important input parameter affecting biogas production, followed by mixing ratio.

This study analyzed the anaerobic co-digestion of inoculum (I), rubber plant effluent (RPE) and Gliricidia leaves slurry (GLS) at different mixing ratios for the simultaneous production of methane and organic fertilizer. The results were analyzed for volatile fatty acids, pH, C/N ratio, and methane production. The organic quality of the substrate mixture before and after anaerobic digestion was analyzed for total organic carbon, total nitrogen, potassium, and phosphorus contents. This study concluded that the inoculum, rubber plant effluent (RPE), and Gliricidia leaves slurry (GLS) mixed at the ratio of 10:2:2 showed higher methane production than other experiments conducted at different mixing ratios. The nitrogen, potassium, and phosphorus contents of the substrates were increased after anaerobic digestion. However, the organic carbon content in the substrate decreased in all experiments. This research recommends the planting of rubber trees and Gliricidia maculata to promote energy sustainability and the socio-economic development of Mauritania.

This study analyzed the anaerobic co-digestion of Inoculum (I), Rubber Plant Effluent (RPE) and Gliricidia leaves (GLS) at different mixing ratios for the simultaneous production of methane and organic fertilizer. The results were analyzed for volatile fatty acids, pH, C/N ratio, and methane production. The organic quality of the substrate mixture before and after anaerobic digestion was analyzed for organic carbon, Kjeldahl nitrogen, potassium, and phosphorus content. The study concluded that the inoculum, Rubber Plant Effluent (RPE), and Gliricidia leaves (GLS) mixed in the ratio of 10:2:2 showed higher methane production than other experiments conducted at different mixing ratios. The nitrogen, Potassium and phosphorus content of the substrates are increased after anaerobic digestion. However, the organic carbon content in the substrate decreased in all experiments. This research recommends the planting of rubber trees and Gliricidia maculata to promote economic development in Mauritania. Keywords: Biogas production; Gliricidia leaves; Methane; Rubber Plant Effluent; Organic Manure