In layered structure, interface plays a significant role in property improvement, whereas its multiple factors at various length scales restricted further understanding. Previous research found a novel grain boundary (GB)-interface interaction: crack initiation locally occurred at the junctions between pre-existing GBs and interface. This leads to decreased interfacial strength. To clarify the mechanisms of such GB-interface interaction, the present study proposed a multi-scale cohesive zone model-crystal plasticity finite element method (CZM-CPFEM) model to investigate the effect of pre-existing GB on intrinsic bonding strength at atomic scale and interfacial stress distribution at micro scale, respectively. At atomic scale, interfacial fracture criteria were modelled according to Molecular Dynamics (MD)-based traction-separation relationships. The accuracy of CZMs was improved by considering both isothermal holding and tilting configuration effects. At micro scale, a practical interfacial microstructure was used to construct CPFEM models. Tensile simulations showed that the local stress concentration occurred at junctions, attributed to the anisotropic plastic deformation behaviours across the GB. On the other hand, weak bonding adhesion at the junction only affects the local crack initiation strength, showing insignificant impacts on the overall interfacial fracture behaviour.
10 December 2025 in International Journal of Fatigue
We employed the high-resolution digital image correlation study to investigate the plastic deformation of low-carbon lath martensite. The strain localization bands were mainly categorized into two types: boundary slips and intra-block deformation. Misorientation angle and inclination angle with respect to loading direction primarily determines the slip activation at boundaries. The competitive relationship between the activation of in-lath-plane and out-of-lath-plane slip systems follows the Schmid effect. The in-lath-plane slip systems were only activated in blocks with high in-lath Schmid factor (SF) value. The out-of-lath-plane slip systems were activated only when its SF is much higher than the maximum in-lath SF, offsetting the effect of the higher critical resolved shear stress (CRSS) for in-lath-plane slip systems. Moreover, the block morphology also affects the slip activation behaviour: in-lath-plane slip systems in columnar blocks were preferentially activated due to both crystallographic dynamics and strain accommodation. In contrast, out-of-plane slip systems were only observed in equiaxed blocks where the boundary effect is weakened.