Li Zhao

Dr. Li Zhao

Yunnan Minzu University, Kunming, Yunnan, China
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 March 2022 in Sensors
Verified
Journal Article
Open access
PDF file
YCYunhao Chen
Yunhao Chen
LZLi Zhao
Li Zhao
SHShuai Hao
Shuai Hao
JTJianing Tang
Jianing Tang
For decades, optical fiber interferometers have been extensively studied and applied for their inherent advantages. With the rapid development of science and technology, fiber sensors with higher detection sensitivity are needed on many occasions. As an effective way to improve measurement sensitivity, Vernier effect fiber sensors have drawn great attention during the last decade. Similar to the Vernier caliper, the optical Vernier effect uses one interferometer as a fixed part of the Vernier scale and the other as a sliding part of the Vernier scale. This paper first illustrates the principle of the optical Vernier effect, then different configurations used to produce the Vernier effect are classified and discussed. Finally, the outlook for Vernier effect fiber sensors is presented.

10 September 2018 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
LZLi Zhao
Li Zhao
YZYundong Zhang
Yundong Zhang
JWJinfang Wang
Jinfang Wang
YCYunhao Chen
Yunhao Chen
A simple and highly sensitive temperature sensor based on an isopropanol-sealed optical microfiber coupler (OMC) is reported. Due to the high thermo-optic coefficient of isopropanol, the temperature sensitivity of the OMC can be effectively improved by immersing the OMC into isopropanol. The refractive index change of isopropanol is caused by the surrounding temperature variation which in turn allows highly sensitive temperature sensing. Theoretical analysis demonstrates that the temperature sensitivity increases quickly with the decreasing OMC waist diameter. Temperature sensitivities at different waist diameters exhibit high consistency with the theoretical results. When used for temperature sensing, the transmission spectrum blueshifts as the surrounding temperature increases. The highest sensitivity of −5.89 nm/°C is achieved at the waist diameter of 2.2 μm. This is the most sensitive OMC based temperature sensing device reported so far. Such a compact size, low cost, and highly sensitive device may widen the application range of OMC.

15 April 2019 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
LZLi Zhao
Li Zhao
YZYundong Zhang
Yundong Zhang
YCYunhao Chen
Yunhao Chen
JWJinfang Wang
Jinfang Wang
A temperature and refractive index simultaneous measurement sensor based on an optical microfiber coupler (OMC) combined with a polarization maintaining fiber (PMF) is proposed and experimentally demonstrated. The OMC-PMF sensor is fabricated by inserting a section of PMF between two output ports of the OMC. The interference spectrum of the OMC-PMF sensor has different responses to temperature and refractive index variations. Temperature and the refractive index can be measured by monitoring the dip intensity variation and the dip wavelength shift of the interference spectrum, respectively. The experimental results show that the refractive index sensitivity is 12 020 nm/RIU, and the temperature sensitivity is 0.88 dB/°C upon increasing temperature from 35 °C to 41 °C.

4 November 2024 in IEEE Access
Verified
Journal Article
Open access
LZLi Zhao
Li Zhao
JWJianlong Wang
Jianlong Wang
YCYunhao Chen
Yunhao Chen
QYQian Yin
Qian Yin
GRGuyao Rong
Guyao Rong
JTJianing Tang
Jianing Tang
In this study, an Infrared Small-Target Detection Transformer (IST-DETR) is introduced, a novel model specifically designed to tackle the challenges of low-resolution infrared images and small target scales. IST-DETR integrates a backbone network, a hybrid encoder featuring, a Mutual Feature Screening (MFS) module, and a decoder with auxiliary prediction heads. The hybrid encoder employs Learning Position Encoding to reduce information redundancy and employs a mutual feature screening mechanism to enhance the interaction between high-level semantic features and low-level positional features, facilitating more accurate detection of small infrared targets. What’s more, a customized IoU metric and a novel sample weighting function are employed to effectively address dataset imbalance, significantly improving detection performance. Experiments conducted on the FLIR Dataset, HIT-UAV Dataset, and IVFlying Dataset yielded an average precision (AP) of 44.1%, 34.0%, and 58.5%, respectively, with a processing speed of 74 frames per second. IST-DETR outperforms contemporary algorithms such as Yolov8, CO-DETR, and DINO, demonstrating a superior balance of speed and accuracy, particularly in recognizing small infrared targets across diverse and complex scenarios.

23 April 2024 in Optics Express
Verified
Journal Article
Closed access
LZLi Zhao
Li Zhao
WLWei Li
Wei Li
YCYunhao Chen
Yunhao Chen
TYTing Yu
Ting Yu
EZEnming Zhao
Enming Zhao
JTJianing Tang
Jianing Tang
We model and demonstrate a self-matching photonic lantern (SMPL) device, which is designed to address the constraint of limited transverse modes generated by fiber lasers. The SMPL incorporates a FMF into the array at the input end of a traditional photonic lantern. The few-mode fiber at the output end is specifically configured to align with the few-mode fiber at the input, therefore named as SMPL. This paper details the design and fabrication of the SMPL device, validated by both simulation and experiment. The 980nm fundamental mode, injected via 980nm single-mode fibers, selectively excites corresponding higher-order modes at the few-mode port of the SMPL. Additionally, 1550nm fundamental and higher-order modes injected at the input end into the SMPL device demonstrates mode preservation and low-loss transmission characteristics. The SMPL is well-suited for developing a ring laser system, enabling selective excitation of 980nm pump light modes and facilitating closed-loop oscillation and transmission of 1550nm laser.

12 August 2025 in Sensors
Verified
Journal Article
Open access
PDF file
HTHongtao Tao
Hongtao Tao
WZWen Zhao
Wen Zhao
LZLi Zhao
Li Zhao
JWJunlong Wang
Junlong Wang
The primary challenge that robots face in disaster rescue is to precisely and efficiently construct disaster maps and achieve autonomous navigation. This paper proposes a method for air–ground collaborative map construction. It utilizes the flight capability of an unmanned aerial vehicle (UAV) to achieve rapid three-dimensional space coverage and complex terrain crossing for rapid and efficient map construction. Meanwhile, it utilizes the stable operation capability of an unmanned ground vehicle (UGV) and the ground detail survey capability to achieve precise map construction. The maps constructed by the two are accurately integrated to obtain precise disaster environment maps. Among them, the map construction and positioning technology is based on the FAST LiDAR–inertial odometry 2 (FAST-LIO2) framework, enabling the robot to achieve precise positioning even in complex environments, thereby obtaining more accurate point cloud maps. Before conducting map fusion, the point cloud is preprocessed first to reduce the density of the point cloud and also minimize the interference of noise and outliers. Subsequently, the coarse and fine registrations of the point clouds are carried out in sequence. The coarse registration is used to reduce the initial pose difference of the two point clouds, which is conducive to the subsequent rapid and efficient fine registration. The coarse registration uses the improved sample consensus initial alignment (SAC-IA) algorithm, which significantly reduces the registration time compared with the traditional SAC-IA algorithm. The precise registration uses the voxelized generalized iterative closest point (VGICP) algorithm. It has a faster registration speed compared with the generalized iterative closest point (GICP) algorithm while ensuring accuracy. In reinforcement learning navigation, we adopted the deep deterministic policy gradient (DDPG) path planning algorithm. Compared with the deep Q-network (DQN) algorithm and the A* algorithm, the DDPG algorithm is more conducive to the robot choosing a better route in a complex and unknown environment, and at the same time, the motion trajectory is smoother. This paper adopts Gazebo simulation. Compared with physical robot operation, it provides a safe, controllable, and cost-effective environment, supports efficient large-scale experiments and algorithm debugging, and also supports flexible sensor simulation and automated verification, thereby optimizing the overall testing process.