The study presents an efficient computational investigation on the behaviour of the direct-drive system integrated into the offshore 5 MW NREL wind turbine model under demanding aerodynamic loading conditions with the aim of optimising and developing more sustainable key structural components. The research was based on computational simulation packages in order to verify the use of real-world wind data and the loading conditions on the blade structures through aero-elastic simulation studies as well as analyse the behaviour of the drive system. Through the application of validated aerodynamic loading conditions, resulting normal forces on the blades structure were obtained and applied to a dedicated simplified model that was also previously validated to estimate the transferred loads into the powertrain. The adopted methodology allowed for the identification of shaft misalignment induced air gap eccentricity. The impact of shaft deflections on resulting magnetomotive force was considered by making use of the Maxwell stress distribution expression. By taking into account the resulting loading cases on the generator structure, as well as the inherent typical loads generated by the electrical machine, a procedure including structural parametric and topology optimisation was developed and performed, achieving a rotor mass reduction between 8.5 and 9.6% compared to the original model.
The study presents an efficient computational investigation on the behaviour of the direct-drive system integrated into the offshore 5MW NREL wind turbine model under demanding aerodynamic loading conditions with the aim of optimising and developing more sustainable key structural components. The research was based on computational simulation packages to verify the use of real-world wind data, the loading conditions on the blade structures through aero-elastic simulation studies, as well as analyse the behaviour of the drive system. Through the application of validated aerodynamic loading conditions, resulting normal forces on the blades structure were obtained and applied to a dedicated simplified model that was also previously validated, to estimate the transferred loads into the powertrain. The adopted methodology allowed for the identification of shaft misalignment induced air-gap eccentricity. The impact of shaft deflections on resulting magnetomotive force was considered by making use of the Maxwell stress distribution expression. By taking into account the resulting loading cases on the generator structure, as well as the inherent typical loads generated by the electrical machine, a procedure including structural parametric and topology optimisation was developed and performed, achieving a rotor mass reduction between 8.5 and 9.6% if compared with the original model.
In this paper, the performance of an adapted design of a 0.6 m impulse turbine in a new wave energy conversion device—the Dolphin device—is evaluated. This study is focused on developing an optimised structure in order to maximise the potential of the device and provide a lightweight and robust novel design. For this purpose, initial studies on the system involved 2D CFD simulations combined with parametric optimisation, which validated the use of the turbine system with water as the working fluid. The obtained component geometries were then used for the creation of a 3D CFD model, which was tested in a set-up dynamic simulation environment. Subsequently, the performance of the system was evaluated through the use of referenced experimental analyses. By taking into account the loading conditions present at the blades, as well as the inherent typical loads caused by the rotational speed of the turbine, the system was then optimised using generative design processes. Through the applied methodology, the performance of the turbine was predicted to be 61.79%. Moreover, the generative design optimisation showed a reduction in mass of 60.226% for the blade structure and 69.523% for the rotor structure.