To study the influence of non-uniform flowfield on the propagation characteristics of helicopter rotor noise, a Hybrid Computational Aeroacoustics (HCAA) method is developed. The acoustic source region is simulated by Computational Fluid Dynamics (CFD) technique with the Unsteady Reynolds Averaged Navier-Stokes equations (URANS) as the governing equations. Acoustic near-field is simulated by Computational Aeroacoustics (CAA) technique with the Linearized Euler Equations (LEE) as the governing equations, and the numerical discretization of the LEE is accomplished by Runge-Kutta Discontinuous Galerkin (RKDG) method. A novel acoustic source extraction method based on pressure and pressure gradient is proposed to accomplish the one-way CFD-CAA weak coupling. The HCAA method is validated through comparisons with noise experimental data of the UH-1H model rotor and the BO-105 model rotor. Based on the proposed HCAA method, the convection and refraction effects of rotor noise under different collective pitch angles are analyzed. The results show that the distortion effect of the rotor noise is most affected by the non-uniformly distributed downwash velocity field, resulting in an increment of acoustic energy below the rotor plane. The effect of non-uniformly distributed downwash velocity on noise propagation increases with the increase of the collective pitch angle. For the UH-1H model rotor, the maximum change of the sound pressure level is 0.8 dB (about 10% change of the effective sound pressure).
To explore the evolution law of rotor vortex and aeroacoustic characteristics during helicopter roll maneuver flight, numerical simulations were conducted in different roll rates based on the high-precision computational fluid dynamics method and the Ffowcs Williams-Hawkings equation. Initially, we verified the collective pitch increased test and the blade/vortex interaction (BVI) test cases. The comparison results show that the constructed method can capture the aerodynamic characteristics of rotor transient maneuvering states and has reliable predictive capability for BVI noise. Then, the aeroacoustic characteristics analyses of different right roll rates was performed. It was found that in the right roll state, multiple vortices merge and develop into a higher-intensity “supervortex system” near the 75° azimuth angle, triggering “superblade/vortex interaction noise” (Super-BVI) upon collision with the subsequent blade, with a maximum increase in the overall sound pressure level (OASPL) of approximately 16 dB. Next, numerical simulations were carried out for different left roll rates, and it was found that the maximum sound pressure (pmax) and maximum OASPL (OASPLmax) have linear and logarithmic relationships with roll rate, respectively. This law holds for both left- and right-roll states. Finally, four cases of specific roll angles were conducted for comprehensive comparison studies. It was found that transient roll maneuvers intensify the interaction strength on the rolling side while weakening the interaction strength on the other side, which is closely linked to the formation mechanism of “Super-BVI noise.”
To investigate the vortex dynamics and loading noise radiation characteristics during dynamic stall of helicopter rotor airfoils, a numerical study is carried out using the unsteady Reynolds-averaged Navier–Stokes method and the Ffowcs Williams-Hawkings equation. First, the aerodynamic and aeroacoustic characteristics of NACA0012 airfoil in dynamic stall were calculated. The numerical method is validated through comparisons with experimental data. Then, the aeroacoustic characteristic of an airfoil in the typical deep stall condition is analyzed, with a detailed discussion on the relationship between flow phenomena and sound pressure (SP). Based on the vortex evolution over airfoil surface, a model for loading noise driven by vortex evolution during dynamic stall is presented. Finally, the impact of reduced frequency (k) on the loading noise characteristics of the airfoil is analyzed, and conclusions are obtained. The dynamic stall loading noise is primarily caused by the shedding and movement of the dynamic stall vortex (DSV) and trailing edge vortex, with DSV shedding inducing rapid and intense SP fluctuations, resulting in high-intensity noise of up to approximately 30 Pa. An increase in k enhances the rate of change in unsteady surface pressure coefficient (Cp), which accelerates pressure variation and leads to a significant rise in overall sound pressure level.